#1 Home Improvement Retailer

Internet # 100372301

Model # PFT-150

Store SKU # 688037

1-1/2 in. x 1-1/4 in. PVC Drain Trap

$8.76
  • Connects a fitting hub to a tubular trap using solvent
  • Durable and long-lasting PVC construction
  • NSF/ANSI standard 14, ASTM D2665 and D311 certified
  • View More Details
Store
0 in stock
caret

Product Details

The Fernco 1-1/2 in. x 1-1/4 in. PVC Drain Trap is made of flexible PVC that can adjust to pipe misalignment. The leak-resistant pipe also resists damage from freezing for long-lasting use. Connection type is mechanical.
  • Install using a torque wrench for a water tight seal
  • Maximum operating temperature of 120F
  • 4.3 PSI maximum test pressure
  • Flexible PVC coupling with 300 series stainless steel clamps
  • Designed for 1-1/4 in. sink drain and can be cut to fit 1-1/2 in. sink drain
  • Fast and easy installation
  • Note: product may vary by store
  • Return Policy

Additional Resources

From the Manufacturer

caret

Specifications

caret

Questions & Answers

8Questions
caret
Q:In what country is this item manufactured?
by|Feb 12, 2023
1 Answer
Answer This Question

A:  Hello Phil, Thank you for your interest in our products. They are proudly manufactured in the USA.

by|Feb 13, 2023
    caret
    Q:Hi, I don't understand why, "Install using a torque wrench for a water tight seal", is included in the Product Overview. I can't see any use for a torque wrench in installing this product. Thanks & Best wishes!!! g.smith
    by|Jan 6, 2022
    1 Answer
    Answer This Question

    A:  A screw driver will not give enough pressure per square inch to tighten the clamp, creating a water tight seal. A torque wrench must be used set to 60"lbs of torque.

    by|Nov 28, 2022
      1 found this answer helpful
      caret
      Q:The description says "Connects a fitting hub to a tubular trap using solvent". Why would solvent be needed, since the picture shows mechanical steel band connections at both ends? If solvent -is- needed, can you describe where to apply it?
      by|Aug 8, 2021
      2 Answers
      Answer This Question

      A:  No need for solvent, you DO NOT want to glue any of this so if you need to pull it apart to clean out the P Trap, the hose clamps are all you need, just make sure they are snug and not over tightened, I suspect there maybe potential to cut the rubber if over tightened

      by|Nov 28, 2022
        1 found this answer helpful

        A:  No solvent needed.

        by|Aug 9, 2021
          caret
          Q:One end can be adjusted to 1.25 or 1.5... but what is the size of the *NON* adjustable end? Do ...
          by|Nov 22, 2020
          2 Answers
          Answer This Question

          A:  One end fits 1-1/2" PVC and the other fits 1-1/2" as well but can be cut down to fit 1-1/4".

          by|Nov 12, 2022
            1 found this answer helpful

            A:  Actually Fernco Product Expert, the other end fits 1-1/4" as built, but can be cut off to fit 1-1/2"

            by|Jul 10, 2022
              1 found this answer helpful
              Showing 1-4 of 8
              caret

              Customer Reviews

              4.7 out of 5
              (131)
              • 4.7
                out of 131 reviews
              • 92% recommend this product
              Filter by:
              Showing 1-10 of 131 reviews
              Fernco to the rescue!
              This Fernco is described as a 1-1/2 x 1-1/4 trap, but the long skinny end can be cut off to make it into a 1-1/2 x 1-1/2. Fernco fittings always feel like cheating to me, but they've saved me more times than I care to admit. As far as I can tell they're code-compliant, which seems reasonable- the materials they're made of are at least as durable as the hard plastic we use without a second thought. I understand HD is reorganizing their plumbing aisles, so hopefully these Ferncos will be where they belong, together with the white PVC Everbilt components
              by
              • Verified Purchase
              • Recommended
              Wish I had found this earlier. After installing this trap...
              Wish I had found this earlier. After installing this trap I will only use this from now on. Very easy to install and gives piece of mind that you won't have to worry about someone bumping the trap and causing a leak.
              by
              • Verified Purchase
              1 found this review helpful
              by
              • Verified Purchase
              Product material seems more than adequate with firm flexibility. Bought as a spare but may need it sooner than expected.
              by
              • Verified Purchase
              The flexible pipe allowed me to avoid cutting the pipe that was already in place shorter. The vanity was less than a cm off.
              by
              • Verified Purchase
              New Sink off center by 1/4 inch and this trap made aligning the pipes easy
              by
              • Verified Purchase
              This trap is very forgiving, unlike its PVC cousin, So, if you're replacing a laundry tub (as I did) and the existing drain, or the height of the tub, or whatever is a little off from the old plumbing, then this trap saves you a lot of finagling.
              by
              • Verified Purchase
              Just what was needed. We were repairing within a very tight spot that required a flexible replacement. So happy with this product and that Home Depot stocks it in their stores.
              by
                by
                  by
                    Showing 1-10 of 131 reviews

                    Compare Similar PVC Fittings

                    current product
                    1-1/2 in. x 1-1/4 in. PVC Drain Trap
                    3 in. x 1-1/2 in. DWV Flexible PVC Coupling1-1/2 in. PVC DWV 90-Degree Mechanical Elbow Fitting1-1/2 in. Flexible PVC DWV Tee
                    BrandFernco FerncoFernco
                    Name1-1/2 in. x 1-1/4 in. PVC Drain Trap3 in. x 1-1/2 in. DWV Flexible PVC Coupling1-1/2 in. PVC DWV 90-Degree Mechanical Elbow Fitting1-1/2 in. Flexible PVC DWV Tee
                    Price
                    $876
                    $936
                    $986
                    $1057
                    Ratings
                    (131)
                    (41)
                    (260)
                    (200)
                    Fitting 1 size1-1/2"1-1/2"1-1/2"1-1/2"
                    Fitting or Connector TypeTrapCouplingElbowTee
                    Schedule TypeSchedule 40Schedule 40Schedule 40Schedule 40
                    ConnectivityCompressionCompressionCompressionCompression
                    Pack Size1111
                    ApplicationNon-Potable Water, SewageNon-Potable Water, SewageNon-Potable Water, SewageNon-Potable Water, Sewage
                    DWVDWVDWVDWVDWV
                    FeaturesCorrosion Resistant, Flexible, RemovableCorrosion Resistant, Flexible, Lead Free, Removable, UV Resistant, Underground Rated, Underground UseCorrosion Resistant, Flexible, Lead Free, RemovableCorrosion Resistant, Flexible, Lead Free, Removable
                    View ProductView ProductView ProductView Product