Return this item within 90 days of purchase.
Flex Trim is the largest flexible moulding manufacturer in the world. Our flexible moulding has the beauty of real wood, at a fraction of the cost and manufacturing time of radius wood moulding. Flex Trim is made of polyurethane material, a strong, long-lasting and cost effective alternative to wood and polyester products. It can turn an ordinary room into a space that is memorable and makes architectural challenges easy. Flex Trim is perfect for round windows, archways, curved wall moulding, decorative doors, radius crown, curved baseboards, column wraps and many other curved or rounded moulding applications. Please note that a straight piece of flexible moulding will not work for all applications. Radiuses casing and crown applications require pre-bending and accurate measurement for proper installation.
Product Depth (in.) | 0.688 in | Product Length (in.) | 144 in |
---|---|---|---|
Product Width (in.) | 1.375 in |
Color Family | Tan | Color/Finish | Product is shipped unfinished, tan in color. |
---|---|---|---|
Decorative Moulding Type | Standard Profile | Durability | Moisture Resistant, Rot Resistant, Rust Resistant, Scratch Resistant, Split Resistant, Termite Resistant |
Finish Type | Unfinished | Installation Type | Glue, Nail |
Interior/Exterior | Exterior, Interior | Material | Polyurethane |
Moulding Cut | Full Stick | Moulding Features | Flexible |
Moulding Type | Base Cap Moulding | Moulding Use | Floor |
Pack Size | 1 | Pattern Number | 163 |
Returnable | 90-Day |
Manufacturer Warranty | Guaranteed against defects in material and workmanship. |
---|
Hi Tom, Regarding your question, this is not an easy question to answer because i don't know what your mantel looks like, how close it is to the actual "fire", etc. Normally, a mantel above a fireplace is not exposed to much heat and if that is the case with yours, i think using the above item should be fine. However, if it is exposed to the heat source (maybe above 120 deg F or so), I probably wouldn't recommend to use this item. Please feel free to contact me directly if you have any other questions/comments. Best regards, Greg Carter - Flex Trim (greg@carterflex.com, direct - 336-242-1766)
Hi Betty, Regarding your question, can you please contact me directly and we can get you taken care of. Best regards, Greg Carter - Flex Trim (Direct - 336-242-1766, greg@carterflex.com)
Hope you are doing well. Regarding your question, PM5 and HD163 are not the same profile. However, we do have molds for the PM5 profile but you would really need to contact me directly for me to explain/discuss that item as we have multiple versions of PM5 (they are all similar but don't match each other exactly - i.e. they are different because they match different wood moulding supplier's PM5 profiles) and this portal does not allow me to attach images, etc. Best regards, Greg Carter- Flex Trim (direct - 336-242-1766, e-mail: greg@carterflex.com)
Hi Daniel, Regarding your question, whether a straight piece will work or not is really dependent on the radius of your application. Basically, our product is highly flexible and the profile will bend very easily against the thin dimension (like wrapping a belt around your waist) but it is going to bend less against the wide dimension (like a rainbow - which is what you are doing). We have 40,000 profiles but there is no magic formula which will tell me how much a profile will bend against the wider dimension but i am guessing that the min. radius for this item (where a straight piece would work) is around 20" +/- and if your application has a tighter radius than that, we would need to "pre-bend" the pieces to the correct radius (our molds are flexible). Hopefully the above is clear but please let me know any questions/comments. Best regards, Greg Carter - Flex Trim (greg@carterflex.com, direct line 336-242-1766)
Our product is highly flexible (a 12 ft piece of HD163 ships rolled up in a box that is 15" x 15") but a 9.4" diameter column is pretty small - and i wasn't sure it would work. However, i just went out and tested a piece and it should work fine at that diameter/radius. Please feel free to contact me directly if you have any other questions. Best regards, Greg Carter - Flex Trim (greg@carterflex.com, direct - (336)242-1766)
This profile matches WM163 base cap - which I think should be available at most Home Depot stores. Please feel free to contact me directly if you have any other questions. Best regards, Greg Carter - Flex Trim (greg@carterflex.com)
If the BACK of the profile is against the wall as is the typical orientation (see picture below), there should be no problem. If not, it probably would NOT work.
Viewing 1-7 of 7
4.8 out of 5
Get an immediate answer with AI
AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.