The GE Q-Line 50 Amp 1 in. Double-Pole Circuit Breaker features a case made of heat-resistant thermoset for stability and structural integrity. The breaker unit has tin-plated copper stabs to create reliable, permanent and corrosion-resistant connections. It also features a dedicated calibration screw that is cemented to prevent shifting and create a stable calibration for optimum performance.
Tin-plated copper stabs create reliable, permanent and corrosion-resistant connections
Box type terminals
Calibration screw is cemented to prevent shifting
Case is made of heat-resistant thermoset for stability and structural integrity
A:Â GE's THQP 1- & 2-pole breakers only fit GE panels that can accommodate them. Check your panel's directory decal, which also shows bus bar configuration. If it indicates A and B on some positions (e.g. 25A, 25B, 28A, 28B, etc.), then THQP can be used.
by|Nov 11, 2023
Q:im having a ev charger installed that puts out 32 amps that uses an nema 1450 outlet that electrician is installing, before i buy the charger will this 40 amp breaker fit in by ge panel box its 200 amp panel box
by|Aug 12, 2023
0 Answer
Answer This Question
Q:Does this put out 220 v , 110 on each pole?
by|Aug 8, 2023
2 Answers
Answer This Question
A:Â This breaker functions the same as any other 2-pole breaker. It's not a tandem breaker. It only fits GE panels in spaces that can accommodate THQP breakers. Being 2-pole it must be installed on the half stabs of adjoining spaces (e.g. 26B & 28A, etc.)
by|Nov 11, 2023
A:Â No. Both poles are on the same phase.
by|Dec 1, 2023
2 found this answer helpful
Showing 1-4 of 76
Customer Reviews
4.6 out of 5
(580)
4.6
out of 580 reviews
89% recommend this product
5
455
4
74
3
15
2
4
1
32
Filter by:
Showing 1-10 of 580 reviews
May 21, 2019
Perfect replacement for my blown breaker .. even the part number was the same.It slid right into ...
Perfect replacement for my blown breaker .. even the part number was the same.It slid right into place.
by
Verified Purchase
Recommended
Feb 21, 2018
The product worked in my older (early 90s era) GE load center panel. We installed a 15,000 btu mi...
The product worked in my older (early 90s era) GE load center panel. We installed a 15,000 btu mini-split system that needed a 240v 15a breaker. Lots of 120v 15a breakers, and 20a and 30a 240v breakers in the store, but not the 240v 15a. Was forced to order it online, and wait 5 days for it to be shipped from GE to the store. The breaker itself works fine, and was not a problem to install. Typical GE quality and the competitive price.
by
Verified Purchase
Recommended
2 found this review helpful
Nov 1, 2017
Very easy to install
Very easy to install
by
Verified Purchase
Recommended
Nov 29, 2023
Perfect, just what I needed
by
Nov 15, 2023
GE always had a great breaker easy to hook up to in your panel box
The GE Q-Line 25 Amp 1 in. Double-Pole Circuit Breaker has a tin-plated copper stab to create a reliable, permanent and corrosion-resistant connection. The unit has a dedicated calibration screw cemented in to prevent shifting. The attached screw creates a stable calibration for optimum performance. The breaker case is made of heat-resistant thermoset for stability and structural integrity.
The GE Q-Line 30 Amp 1 in. Double-Pole Circuit Breaker features tin-plated copper stabs to create reliable, permanent and corrosion-resistant connections. The unit has a dedicated calibration screw that is cemented to help prevent shifting and an attached screw to create a stable calibration for optimum performance. This double-pole circuit breaker has a case that is made of heat-resistant thermo-set for stability and structural integrity.
The GE Q-Line 60 Amp 2 in. Double-Pole Circuit Breaker has tin-plated copper stabs to create reliable, permanent and corrosion-resistant connections. The unit has a dedicated calibration screw which is cemented to prevent shifting. The attached screw creates a stable calibration for optimum performance. The case is made of heat-resistant thermoset for stability and structural integrity.
The GE Q-Line 30 Amp 2 in. Double-Pole Circuit Breaker has a dedicated calibration screw which is cemented to prevent shifting. The attached screw creates a stable calibration for optimum performance. The unit has tin-plated copper stabs to create reliable, permanent and corrosion-resistant connections. The case is made of heat-resistant thermoset for stability and structural integrity.