1-3/4 in. x 10-Gauge Exterior Galvanized Ring Shank Roofing Nails with Neoprene Washers 1 lb. Box
- 1-3/4 in. x 10-gauge nails with flat round head for roofing
- Hand drive fastener for attaching roofing products to exterior
- Made from high strength steel for robust durability
- View More Details
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase.
Ask about this product
Get an answer now with AI
AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.
Product Details
About This Product
Grip-Rite 134HGNEO1 1-3/4 in. x 10-Gauge Exterior Galvanized Ring Shank Roofing Nails with Neoprene Washers are designed for use with clay roofing tiles. The sharp diamond tip and ring shank create a powerful hold while the washer creates a tight seal against water intrusion. Hot galvanized to resist corrosion, these nails are a lasting solution for natural roofing materials.
Highlights
- Used to fasten clay roofing tiles to wood substrates
- Durable steel construction
- Exterior galvanized for outdoor use
- 1-3/4 in. x 10-Gauge roofing nails
- Wide, flat head creates a lasting seal with the neoprene washer
- Diamond point easily penetrates tough materials
- 1 lb. box with around 120 1-3/4 in. x 10-Gauge roofing nails
- Return Policy
- California residentssee Prop 65 WARNINGS
Product Information
Additional Resources
Shop All Grip-RiteSpecifications
Dimensions
Fastener Length (in.) | 1.75 in |
|---|---|
Nail Length (In.) | 1 3/4 in. |
Details
Fastener Type | Non-Collated Roofing Nail |
|---|---|
Features | ACQ Rated |
Finish Family | Galvanized |
Interior/Exterior | Exterior |
Nail Coating | Hot Galvanized |
Nail Type | Roofing Nail |
Package Quantity | 107 |
Product Weight (lb.) | 1 lb |
Returnable | 90-Day |
Shank Type | Ring Shank |
Warranty / Certifications
Manufacturer Warranty | No |
|---|
Questions & Answers
Can I use these roof nails to secure the metal plate of the exhaust ventilation cap in to the plywood?
Please refer to the exhaust vent installation instructions for recommended fastener/adhesive usage.
Please refer to the exhaust ventilation install instructions for preferred fastener/adhesive.
Can you use these with asphalt shingles in pressure treated plywood? Or will the washer cause the shingles to not sit flush?
This nail is best suited for metal roofing specifically. You are better off using the normal roofing nails for shingles.
Can I install zinc flashing and placing these nails slightly under the shingles?
These Grip-Rite nails are used when installing metal or fiberglass roofing.
How long will the neoprene last? Should this be covered with a dab of roofing sealant in case the neoprene gives out?
there is no proven timeframe, but the neoprene is known to last years and roofing sealant isn’t required but is good for added protection
Do u have these grip rite nails in coil form for nailer
I do not believe so. The nails I purchased came in a one pound box. These nails are used for Spanish ceramic roof tiles that are driven in one at a time.
Roughly how many nails are in s pound?
The approximate count per carton is 120
Can these nails be used for vinyl siding without the rubber seal?
Greetings Bob, I do not see why you cannot use these nails on vinyl siding. I like them because of their rink shank. The 1-3/4 gives them plenty of bite. I use them to secure Jame Hardi Board to our home because of the high winds. I predrill every hole about two sizes under and remove the rubber seal before I install the nails. Hope this helps.
I assume these can never be removed once they're nailed in and you'd have to use a grinder to take off the top?
If the heads stay on they can be pulled out with a modified nail pulling bar and shim block but the problem is that the heads break off most of the new nails even while driving them in, let alone trying to pull them out.
Hello Chris, Well, you could use a cats claw to remove them. But once you nail them in, they are there for the duration. Hope this helps.
Yes, they can be removed just like any other nail.
Viewing 1-8 of 12
Customer Reviews
4.6 out of 5
Loading Recommendations
Compare Key Features
Product Snapshot | |||
|---|---|---|---|
Ideal for clay tile roofing, with galvanized coating, ring shank for superior hold, and a watertight seal. | Ideal for roofing projects, these galvanized ring shank nails offer superior holding power and corrosion resistance for lasting performance. | Ideal for roofing projects, these electrogalvanized nails offer superior rust resistance and secure fastening with a smooth shank for easy driving. | Ideal for roofing projects, these electrogalvanized nails offer superior rust resistance and secure fastening with a smooth shank for easy driving. |
Corrosion Resistance | |||
Galvanized Coating | |||
Length | |||
1-3/4 in. | 1-3/4 in. | 1-3/4 in. | 1-1/4 in. |
Gauge | |||
10-Gauge | 5D | 11-Gauge | 11-Gauge |
Ring Shank | |||
Related Products
1-1/2 in. x 12-Gauge Electrogalvanized Plastic Round Cap Roofing Nails 1 lb. Box
Grip-Rite 112PRCAP1 1-1/2 in. x 12-Gauge Electrogalvanized Plastic Round Cap Roofing Nails are designed to secure house wrap, sheathing, and roofing felt. The 1 in. wide plastic cap secures materials to wood roofing underlayment for long-lasting, secure fastening. Ring shank provides extra grip and easy installation. These are some of our most popular, highest-performing round cap roofing nails!
1-1/4 in. x 11-Gauge Electrogalvanized Flat Head Smooth Shank Roofing Nails 1 lb. Box
Grip-Rite 114EGRFG1 1-1/4 in. x 11-Gauge Electrogalvanized Flat Head Smooth Shank Roofing Nails are designed to attach various roofing products onto exterior surfaces. Zinc-coated to resist rust and corrosion, the sharp diamond tip makes installation a cinch! Designed with smooth shank for easy driving, the wide flat head reduces pull-through.
1-3/4 in. x 5D Hot Dipped Galvanized Ring Shank Non-Collated Roofing Nail with Neoprene Washer 1 lb. (117-Count)
Nails are ideal for attaching shingles, housewrap, roofing and other siding to wood. The nails are rust and weather resistant with a diamond point tip for easier driving. Various sizes and types of other Everbilt nails are offered to best fit your application.
1-3/4 in. x 11-Gauge Electrogalvanized Flat Head Smooth Shank Roofing Nails 5 lb. Box
Grip-Rite 134EGRFG5 1-3/4 in. x 11-Gauge Electrogalvanized Flat Head Smooth Shank Roofing Nails are designed to attach various roofing products onto exterior surfaces. Zinc-coated to resist rust and corrosion, the sharp diamond tip makes installation a cinch! Designed with smooth shank for easy driving, the wide flat head reduces pull-through.
