Element Wood 1/4 in. x 6 in. x 48 in. Grey Resin Decorative Wall Panel with Trim (18-Pack)
$3.44 /sq. ft.
Covers 36 sq. ft.
$123.99 /bundle
Save up to $100 on your qualifying purchase 
Apply for a Home Depot Consumer Card- Ultra-realistic wood appearance is nuanced and textured
- Brightens and decorates interior walls
- Quickly apply to your walls with the double-sided tape strips
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details
Specifications
Paneling Features
Formaldehyde-freeMoisture ResistantRot Resistant
Dimensions
| Actual Product Height (in.) | 0.25 in | Actual Product Thickness (in.) | 0.25 in |
|---|---|---|---|
| Actual Product Width (in.) | 6.00 | Nominal Product Length (ft.) | 4 |
| Nominal Product Thickness (in.) | 1/4 | Nominal Product Width (ft.) | 1/2 |
| Total Coverage Area (sq. ft.) | 36 |
Details
| Application | Wall | Color Family | Gray |
|---|---|---|---|
| Color/Finish | Grey | Finish Type | Finished |
| Installation Type | Peel & Stick | Interior/Exterior | Interior |
| Joint Type | Tongue & Groove | Material | Resin |
| Number per Package | 18 | Paneling Appearance | Wood |
| Paneling Features | Formaldehyde-free, Moisture Resistant, Rot Resistant | Paneling Profile | Flat |
| Paneling Type | Decorative Panel | Product Weight (lb.) | 16 lb |
| Returnable | 90-Day |
Warranty / Certifications
| Manufacturer Warranty | 5 year warranty |
|---|
Questions & Answers
85Questions
Q:does this product need a corner guide
by|Jan 28, 2023
0 Answer
Q:Is it bendable ? Our wall is rounded
by|Dec 5, 2022
0 Answer
Q:Is that waterproof or not? I want to use in the bathtub wall
by|Oct 26, 2022
1 Answer
Q:Can this be installed on a ceiling?
by|Aug 24, 2022
1 Answer
Showing 1-4 of 85
Nov 16, 2022
Easy to install and nice looking
A little pricey, but happy with the results. Took out a fireplace and did not want to match a textured wall. Easy to install with a straight edge and sharp utility knife and construction adhesive. Make first score light then increase pressure, both sides. Then I cut through on top and bottom and snap. With a good 90 deg cut the ends match up very well. Set up a brace system, floor to ceiling to press the panels on, while adhesive set. Tongue and groove top and bottom helps align.
by
Aug 26, 2022
...
by
Aug 9, 2022
Not enought double back tape
Nice product. Finished the wall nicely. But do the math. 18 boards. Each board requires 12 pieces of tape (per the instructions) and there are only 180 pieces of tape. There should be a minimum of 216 pieces of tape. Luckily I only needed 4 boards out of the last box or I would be running to the hardware store for more tape. Also very tedious to install. Each piece of double back tape needs its backing removed. Be sure to have reading glasses and an x-acto knife to remove the backing.
by
Nov 6, 2020
Looks amazing!
This was exactly what I was looking for: neutral, modern, and a wonderful accent texture! After getting into the measuring and cutting pattern, it was pretty easy to cover the entire family room wall. The panels are textured, not with the printed grain, but the texture does make it look less artificial.
Some tips:
We bought paneling glue just in case the adhesive strips didn't work; you won't need it. I had to pull and replace panels a couple of times, and pulled up several layers of paint and some drywall with the adhesive strips. They're not going anywhere.
After trying a few options, a Dremel made cutting a breeze! I recommend cutting at a slight angle so the show side is the longest. I just used another board as the guide for the pencil.
Be very careful to look for patterns on the board before placing. There are about 5 different shades/patterns and some are more rare than other, so be sure to space them out accordingly. I accidentally placed the same pattern directly on top of itself a couple times, and it still bugs me.
by
Oct 2, 2020
I was able to rent and vinyl cutter for $25.00 at Home Depot and it turned out amazing. I am very...
I was able to rent and vinyl cutter for $25.00 at Home Depot and it turned out amazing. I am very new at adding wall tile and for a beginner this was an amazing project. 2 don'ts for this project. 1. Do not use the utility knife to cut the vinyl will not cut evenly. After I cut the 4th tile and getting a unfinished look, I went and rented the vinyl cutter which was a dream come true. Love the look and it is a great color too. the other don't is to use a nail gun to add trim. It will add holes if not careful due to the pressure. Better off to use the grab it glue sealer.
by
Sep 21, 2020
Looks like the picture and was easy to put together
Looks like the picture and was easy to put together
by
Jun 3, 2020
We were looking to accent a wall in the bathroom and thought we would give this product a try. I...
We were looking to accent a wall in the bathroom and thought we would give this product a try. Installation was a slow because I was working alone but it was easy in spite of never doing this type of install before. The results were dramatic. We also splash on that wall quite a bit and the product just remains clean and stain free. It is much easier to maintain than a painted wall and it looks amazing. We have already started to look for the next wall we will be accenting! Great Product!
by
May 14, 2020
This product was very easy to use. Easy to cut...
This product was very easy to use. Easy to cut and enhanced our living room perfectly. The only one complaint I had was the tape was a pain to remove the double sided backing on. Other than that would totally use again.
by
Oct 9, 2019
OK here is my thoughts and tips on this product. If you buy more than 1 box of this make sure to ...
OK here is my thoughts and tips on this product.
If you buy more than 1 box of this make sure to open all boxes because the color varies from box to box. 1st box was brownish gray, 2nd box was silverish black. Looks great mixed together but would look silly if I put up the brown stuff on top and silver stuff on the bottom.
2nd thing I learned was these panels are square and your ceiling is not. Make a level line for the trim piece on top. You will run into problems second line down if your starting line is not flush. Other reviews said they used liquid nails and now I know why. The provided sticky strips work but make sure you don't need to adjust the panel because they will tear the top layer of sheet rock off. Just take your time. Looks really cool.
by
Jun 25, 2019
Even though it's not wood it has a very nice look and there is enough pattern variation to make i...
Even though it's not wood it has a very nice look and there is enough pattern variation to make it look authentic. If you are doing a solid wall I am sure it goes up quite easily. But if you are going to have to cut to go around windows or counter top edges be prepared for the job to take a while. Straight edge cuts are relatively quick and easy . If you have to cut a piece length wise or shape to go around an unusual edge the cut takes much longer to make and it quite a pain when you have to use a razor to make it. I would use it again for a straight wall but don't think I would for anything with a lot of specialty cuts.
by
You Might Also Need
Element Wood 1/4 in. x 6 in. x 48 in. Grey Resin Decorative Wall Panel with Trim (18-Pack)
Grossfilex Element Wood Wall Panelling Installation
A short video highlighting how to install Grossfilex Element Wood Wall Panelling correctly without any fuss. Cut to desired length and apply double-sided tape for hassle-free installation.
Get 10% off your purchase
Sign up for emails & save 10% on select home decor. Valid on select items.
Explore More on homedepot.com
Doors & Windows
Electrical
Hardware
Plumbing
