The unique compression design makes it the easiest underground gas fitting on the market. No special tools or skills required.
With HOME-FLEX UNDERGROUND, just cut your pipe and insert the included stiffener. There’s no need to chamfer the pipe, only smooth away any burrs and then tighten the nuts.
Easily connect runs of pipe to another pipe run, a meter riser, or transition fitting with our one-of-a-kind fittings.
It is simple to change the direction of your pipe run with our different fitting options.
With the ability to remove and reuse the fittings again and again, you can add a tee and make a new line whenever you want.
This MDPE pipe is easier to use than standard steel pipe, and the polyethylene construction will never rust.
Easy to follow steps and a simple compression design makes install a breeze.
Quickly install yourself with no need to purchase professional tools or services.
When changing the location or adding to a line, just remove and reinstall.
Use with confidence knowing the products are made to withstand high PSI ratings.
All pipe and fittings are IPS (Iron Pipe Size) and are fully compatible with other IPS polyethylene pipe.
These gas pipe and fittings are approved for underground application.
A: Hi, Herb - You should use a bent meter riser. 1" model # is 18-440-010. Check it out on homedepot.com. You can also download a HOME-FLEX Underground Design & Installation Manual for a comprehensive overview of our product and installation information at homeflex.com / resources. For further advice, you can also call our Customer Service Department at (661) 257-3923 x 1026 (Dave) or x 1010 (Jon) M-F 8a - 5p Pacific time. Thanks.
A: This pipe can 't take sunlight so you need to buy a riser to come out of the ground. The riser should have a threaded connection on the end.
A: No, i had to order it. Also had to order some of the fittings.
A: Limited sizes I believe. It seems they carry 1” but other diameters may have to be ordered and delivered. Use the Home Depot app to see if your locale store has what you need.
A: Not in Kerrville. All piping and fittings used on our project had to be purchased outside our trade area.
A: Hi, Samf - Home Depot carries 1/2", 3/4", and 1" HOME-FLEX Underground products in most stores. Anything over 1" is available at homedepot.com and can be delivered directly to your home or your local store.
A: Hi, Johnnie - Absolutely not. As noted on the homedepot.com posting, gas poly pipe (no matter the manufacturer) is never to be used inside a building and/or under a foundation with a structure on it. Please refer to our HOME-FLEX Underground Design & Installation Manual available at homeflex.com/resources. Thanks.
A: I do not believe you can run it inside a house
A: No, this was designed for direct burial propane gas.
A: Hi, Chester - Yes. All our pipe has all the required markings on it.
|Name||1/2 in. IPS x 100 ft. DR 9.3 Underground Yellow Polyethylene Gas Pipe||3/4 in. IPS x 100 ft. DR 11 Underground Yellow Polyethylene Gas Pipe||1 in. IPS x 100 ft. DR 11 Underground Yellow Polyethylene Gas Pipe||1/2 in. x 250 ft. Polyethylene Tubing Coil in Red|
|Actual inside diameter (in.)||.64||.86||1.075||.375|
|THD SO SKU||1002478452||1002478453||1002478454|
|View Product||View Product||View Product||View Product|