The unique compression design makes it the easiest underground gas fitting on the market. No special tools or skills required.
With HOME-FLEX UNDERGROUND, just cut your pipe and insert the included stiffener. There’s no need to chamfer the pipe, only smooth away any burrs and then tighten the nuts.
Easily connect runs of pipe to another pipe run, a meter riser, or transition fitting with our one-of-a-kind fittings.
It is simple to change the direction of your pipe run with our different fitting options.
With the ability to remove and reuse the fittings again and again, you can add a tee and make a new line whenever you want.
This MDPE pipe is easier to use than standard steel pipe, and the polyethylene construction will never rust.
Easy to follow steps and a simple compression design makes install a breeze.
Quickly install yourself with no need to purchase professional tools or services.
When changing the location or adding to a line, just remove and reinstall.
Use with confidence knowing the products are made to withstand high PSI ratings.
All pipe and fittings are IPS (Iron Pipe Size) and are fully compatible with other IPS polyethylene pipe.
These gas pipe and fittings are approved for underground application.
A: Hi, Chester - Yes. All our pipe has all the required markings on it.
A: Hi, Steve - We're a distributor and not set up for direct consumer sales. However, you can order our part number 19-2011500 2" x 500' gas poly pipe at homedepot.com. On line price is $844 per coil with free freight. This is the largest coil we make, so it's advisable that you have them shipped to your local Home Depot store where they have equipment to unload the order as well as to assist loading it in/on your vehicle. Each coil weighs 315 pounds.
A: Hi, Help - This pipe is designed and tested for use with gas. Using it for anything else would be at your own risk. That being said, since it is a gas-tight system, it would probably work for water as well but, again, it's not tested and certified for use with anything but gas.
A: Hi, Juan - The answer to your question would depend on the total btu/h of the system, the capability of your meter or tank, and the pressure of the line. Suggest you refer to our System Design & Installation manual available at homeflex.com/resources and refer to the sizing charts. Thanks.
|Brand||HOME-FLEX||HOME-FLEX||Advanced Drainage Systems||HOME-FLEX|
|Name||Underground 1in IPS New Install Kit (1)1in x 100 ft. Pipe (2)1in Couplers (2)1in Meter Risers, Gas Line Detection||1 in. IPS x 500 ft. DR 11 Underground Yellow Polyethylene Gas Pipe||1 in. x 300 ft. IPS 200 psi NSF Poly Pipe||2 in. IPS x 250 ft. DR 11 Yellow Polyethylene Underground Gas Pipe|
|Nominal Inside Pipe Diameter (In.)||1"||1"||1"||2"|
|Actual inside diameter (in.)||1||1.075||1.049||1.943|
|View Product||View Product||View Product||View Product|