#1 Home Improvement Retailer

Internet # 305510552

Model # 3588748

Store SKU # 1003306888

HTB 1/4 in. Toggle Bolt Drywall Anchor with Zinc Plated Phillips Head Screw (8-Pack)

$12.25
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy

Product Details

About This Product

The Hilti 1/4 in. Drywall Anchor with Phillips Flat Head Screws is a drywall fastening solution that is ideal for a variety of hollow wall materials in a wide range of thickness. The rounded edges for easy fit through the wall, the metal teeth to prevent spinning inside the wall, and the snap neck design all compliment a quick and easy installation. No setting tool is required, making your fastening project that much easier.

Highlights

  • Package includes 8-units of the Hilti 1/4 in. drywall anchors with Phillips flat head screws
  • Large range of fastening thickness from 1/2 in. to 3 in.
  • Spring mechanism forces the channel into the vertical position once installed through the wall
  • Thinner collar provides a flush finish
  • Please see Load guide for reference
  • Applications include drywall and hollow block, light hand rails, TV mounts and partition walls
  • Learn more about drywall anchors here.
  • Return Policy
  • California residents
     see Prop 65 WARNINGS

Product Information

Internet # 305510552

Model # 3588748

Store SKU # 1003306888

Specifications

Dimensions

Anchor Diameter (in.)

1/4"

Anchor Length (in.)

2.5

Required Drill Hole Size (in.)

.5

Details

Anchor Head Style

Flat

Drive Style

Phillips

Fastener Callout Size

#2

Fastener Color

Silver

Fastener Material

Nylon

Fastener Type

Toggle Bolts

Fastening Base Material

Cinder Block, Drywall, Plaster, Wood

Included

Screw

Interior/Exterior

Interior

Maximum Weight Capacity (lb.)

0

Measurement System

Inches

Package Quantity

8

Product Weight (lb.)

.05 lb

Returnable

90-Day

Warranty / Certifications

Manufacturer Warranty

No Warranty is included

Questions & Answers

23Questions
caret
Q:I am attaching a Kanto LX600SW full motion TV mount (17 lbs) to 1/2 in dry wall. The TV weighs 47 pounds. Wall studs are metal. Assuming no attachment to the studs. Will 8 1/4 Toggle anchors in 1/2 in dry wall be sufficient? If not, recommends?
by|Jun 2, 2024
1 Answer
Answer This Question

A:  This toggle bolt will work in a wide range of drywalls and hollow wall materials up to 3" thick. With your hole diameter being 1/2" using a 1/4" anchor, tension is 45 lbs and shear is 65 lbs.

by|Jun 3, 2024
    caret
    Q:What type of toggle anchor for the flat metal stud mounted on cider block.
    by|Feb 21, 2024
    1 Answer
    Answer This Question

    A:  In this scenario, the kwik-con ll anchors would work best. Base materials include, Concrete (uncracked), Masonry (grout-filled CMU), Masonry (solid). Predrill your hole to the size specifications.

    by|Feb 22, 2024
      caret
      Q:How much weight does one hold
      by|Jan 19, 2024
      1 Answer
      Answer This Question

      A:  Using this 1/4" anchor with 1/2" hole diameter there are 3 different base materials that have their own shear and tension allowable load. 1/2" Dry wall= 45lb tension/ 65lb shear; 5/8" dry wall= 85lb tension/120lb shear and hollow concrete block= 200lb tension/270lb shear.

      by|Jan 19, 2024
        caret
        Q:How long are the screws?
        by|Jan 17, 2024
        1 Answer
        Answer This Question

        A:  The screws are 2 1/2” long. Bit diameter needed is 1/2” for this 1/4” anchor.

        by|May 4, 2024
          1 found this answer helpful
          Showing 1-4 of 23

          Customer Reviews

          3.8 out of 5

          • 3.8 out of 270 reviews
          • 42% recommend this product
          Filter by:
          Showing 1-10 of 270 reviews
          Great thru shiplap
          Bought extra 10 pack after reading the mixed reviews. Did use 43 to get 40 in place. Worked great thru shiplap and drywall for shelf brackets. They always snapped into place easy inside the wall - pressing down the collar into wood and pulling the ziptie took the most effort. Just don't use too much force. If you score the plastic a bit it will break off flush. If not they break off a little under flush - either way worked. Did not have any spin inside the un-insulated wall.
          by
            • Recommended
            Complete trash
            I bought these and went by the chart. Apparently that is incorrect my brand new 75” is now just trash. I would not recommend these at all.
            by
              5 found this review helpful
              Total junk!
              I've used the Toggler brand from a competitor many times w/ great success. These, not so much. The plastic is hard & brittle which makes it difficult to push these in the wall fully, especially if your material is thick. Once in, the friction between the plastic strap & the toggle can be too much that the strap breaks off before the toggle is seated. Finally, the strap breaks w/ a jagged edge protruding that when removed breaks off behind the faceplate causing the toggle to fall behind the wall.
              by
                • Verified Purchase
                Much too fragile system. I was able to place 1 of 4 without breaking the plastic stems. Complete waste of time and money.
                by
                • Verified Purchase
                by
                • Verified Purchase
                Not the Hilti quality I've experienced with other Hilti products. The plastic was very brittle and snapped during the insertion process. I have installed other brands of the same design without this problem. However , once inserted, the anchor performed well.
                by
                • Verified Purchase
                by
                • Verified Purchase
                • Verified Purchase
                by
                • Verified Purchase
                Showing 1-10 of 270 reviews

                Compare Similar Items

                current item

                Anchor Diameter (in.)

                1/4"

                #8

                3/16"

                1/4"

                Anchor Length (in.)

                2.5

                2.5

                6

                6

                Maximum Weight Capacity (lb.)

                0

                100

                106

                137

                Fastening Base Material

                Cinder Block, Drywall, Plaster, Wood

                Drywall

                Cinder Block, Drywall, Plaster, Wood

                Cinder Block, Drywall, Plaster, Wood

                Fastener Type

                Toggle Bolts

                Toggle Bolts

                Toggle Bolts

                Toggle Bolts