$7.78
- 1:1 mix ratio, general purpose clear epoxy w/ resealable cap
- 5 minute set time and 1 hour cure; tensile strength of 3900 PSI
- Metal, PVC, wood, concrete, ceramic & tile, fiberglass and glass
- View More Details
Product Details
Specifications
Questions & Answers
78Questions
Q:How will this work on foundation crack and carbon fiber?
by|Aug 30, 2023
1 Answer
Q:Can I use this on fribglass tub
by|Aug 24, 2023
1 Answer
Q:How to remove the cap?
by|Jul 28, 2023
1 Answer
Q:will this work on trex ? like joint gluing a miter?
by|Jul 24, 2023
1 Answer
Showing 1-4 of 78
5
478
4
85
3
36
2
28
1
79
Aug 14, 2023
Junk
This product is junk. I’m bonded my back up camera for my RV metal to metal and yes all surfaces were cleaned and dried. It didn’t not bond in 5 minutes and here we are 5 hours later and it’s still hasn’t even hardened. And yes both sides came into contact with one another.
by
Jun 20, 2023
A Horrible mess.
I bought this to glue together 3d printed PLA parts. I followed the instructions EXACTLY. I am no stranger to this sort of thing. Well, it’s now 3 days later and this stuff still has not hardened. It is stinking up the place and a gooey mess. It is in garage that is 72 degees and perfect humidity level as I store alot of wood. Sorry JB weld. My company will be looking elsewhere.
by
Apr 23, 2023
No porcelain
Did not repair my porcelain at all. No hold
by
Response from jbweld TeamApr 24, 2023
Email me about the problem with the Clearweld. chris@jbweld.com
Customer review from homedepot.caNov 30, 2022
Securely attached Polywood to Slate
Used it to attach a polywood bench to Tennessee Blue slate so I wouldn't have to use an L-bracket. So far has survived several hard rains, several freezes and multiple seatings. Still holding. The other product clear Loctite for Tile, etc. did not hold.
by
Oct 11, 2022
Brilliant presentation
[This review was collected as part of a promotion.] I am using this for small repairs in my Radio Controlled airplanes since it does bond very well on foam, wood and aluminum and I have to say it’s been brilliant!
The even delivery of the two liquids in the syringes makes it very practical and easy to use. Can be used in small quantities. You have to mix the two parts right away.
Once mixed it lasts around 5 minutes before the curing begins to make it thicker and it becomes increasingly difficult to use.
Usually I wait for at least 24 before using the parts that are now glued.
It is not completely glass clear, it is more like white ambar transparent, but the joints, when it cures, looks clean.
The smell is not an issue for me since I am used to the Expoxi odor.
by
Jun 3, 2020
I've used J-B Weld products for many years and have generally had good results. I bought this to...
I've used J-B Weld products for many years and have generally had good results. I bought this to replace the same product as that was several years old and wouldn't harden up completely. It was used in an attempt to repair the broken edge of the lid for my pool filter. While it looked good after cleaning the area and letting it set overnight within 30 seconds of pressuring the system to about 12 lbs. of pressure the lid starting leaky and had to be shut down. The repair was completely failed.
I still like J-B products but for this use it didn't work.
by
Feb 23, 2020
Glue works well as described. The five minute hardening time is real, so be ready with your assem...
Glue works well as described. The five minute hardening time is real, so be ready with your assembly before you start the mixing. The dual tube setup with push mechanism assures equal parts of the chemicals are dispersed. What is best however is the Cap which closes very nicely over both dispensing tubes when you you are done. There is no mess.
by
Feb 11, 2020
I actually got this to encapsulate some electronics and it has a fast set time. It worked great....
I actually got this to encapsulate some electronics and it has a fast set time. It worked great. In my case I was dealing with a small cylinder I needed to fill so it was a bit messy, should’ve used a small syringe. Wear gloves and protect anything it might drip on. I’d definitely buy it again because it’s a bit cheaper than the other epoxies I looked at.
by
Oct 16, 2019
This epoxy is stronger than most others I’ve used. The clear color made it blend well with the re...
This epoxy is stronger than most others I’ve used. The clear color made it blend well with the repaired items. We are excited to get our broken sculptures back.
by
Jun 21, 2019
Easy to use. Directions are clear and concise.
Easy to use. Directions are clear and concise.
by
0/0
Explore More on homedepot.com