#1 Home Improvement Retailer

Internet #303710806

Model #50176H

Store SKU #1002913062

  • Easy-to-use syringe with re-sealable no waste cap
  • Quick-setting steel reinforced epoxy
  • Sets in a matter of minutes and cures in 4-6 hours to dark grey
Store
0 in stock
Text to Me
caret

Product Details

J-B KwikWeld is a fast setting version of The Original J-B Weld two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. J-B KwikWeld has a 1:1 mixing ratio, sets in 6 minutes and is fully cured in 4-6 hours. J-B KwikWeld cures to a dark grey color, is rated at a tensile strength of 2424 PSI and will withstand temperatures up to 300F.
  • Great for household repairs
  • Great for automotive
  • Great for plumbing
  • Great for marine
  • Great for crafts and more
  • Dries dark grey
  • Cure time 4-6 hours
  • Set time 6 min.
  • Strength 2424 PSI
  • Return Policy
  • California residents

Additional Resources

From the Manufacturer

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.
caret

Specifications

caret

Questions & Answers

17Questions
caret
Q:Will you his work on cast iron pipe to repair pin hole.
by|Jan 24, 2023
2 Answers
Answer This Question

A:  You should use: J-B Weld FiberWeld 2” Pipe Repair Cast 2x60 Inch - High Strength Adhesive Fiberglass Wrap - White (38260)

by|Jan 26, 2023

    A:  Yes as long as not much over 40 psi

    by|Jan 25, 2023
      caret
      Q:Will this work to seal some cracks for a cara gasoline tank?
      by|Nov 10, 2022
      1 Answer
      Answer This Question

      A:  Look to the 8217 Tank weld

      by|Nov 11, 2022
        caret
        Q:Will this bond plastic to metal
        by|Oct 29, 2022
        1 Answer
        Answer This Question

        A:  Better to use the 50139 Plastic Bonder

        by|Oct 31, 2022
          caret
          Q:Wil this work to patch a holein a dryer drum?
          by|Oct 13, 2022
          1 Answer
          Answer This Question

          A:  Yes if it is steel. Be sure to sand the area to remove any glass

          by|Oct 14, 2022
            Showing 1-4 of 17
            caret

            Customer Reviews

            4.2 out of 5
            (495)
            • 4.2
              out of 495 reviews
            • 87%recommend this product
            Filter by:
            Showing 1-10 of 495 reviews
            Very Good, used on a wear hole on my mower...
            Very Good, used on a wear hole on my mower deck approx. 2" x 4" better than bondo
            by
            • Verified Purchase
            Best glue ever! Next time I would get the old fashioned tubes. Easier to control the portions.
            Best glue ever! Next time I would get the old fashioned tubes. Easier to control the portions.
            by
            • Verified Purchase
            • Recommended
            I used it on a wet tile saw arm and is still holding. I used it on the support arm that is no lon...
            I used it on a wet tile saw arm and is still holding. I used it on the support arm that is no longer being made by ryobi. My saw still works great but so needed to save it Jb weld saved me and 3 months down to road and many uses later still holding strong.
            by
            • Verified Purchase
            • Recommended
            I definitely recommend KwikWeld. This product works. I used it on my storm door. The bottom of th...
            I definitely recommend KwikWeld. This product works. I used it on my storm door. The bottom of the metal frame was detaching from the glass.
            by
            • Verified Purchase
            • Recommended
            Patched a hole in my tractor transmission case with ease. JB Weld saved me a lot of work and money.
            Patched a hole in my tractor transmission case with ease. JB Weld saved me a lot of work and money.
            by
            • Verified Purchase
            • Recommended
            the JB weld worked great , fast and strong grip
            the JB weld worked great , fast and strong grip
            by
            • Verified Purchase
            • Recommended
            I purchased this specifically because it bonds wood to metal....
            I purchased this specifically because it bonds wood to metal. I epoxied custom wooden scales to a Swiss Army Knife, and it worked great. Would definitely recommend this product.
            by
            • Verified Purchase
            Easy to use. Works as stated. It does have a...
            Easy to use. Works as stated. It does have a bad odor though.
            by
            • Verified Purchase
            JB Weld
            The tubes do not dispense (air pockets in tube) equal amounts of product, producing poor mixing ratios. The second time I used this product, I dispensed the entirety of both tubes so that I would get the right product ratios. This was all predicated that each tube contained the same amount of product. Treat this as a single-use applicator to ensure the proper amount of product is dispensed.
            by
            Response from jbweld TeamJan 20, 2023
            Sorry for the problems. Email me at chris@jbweld.com for a replacement. Reference # 8276 jbweld
            • Verified Purchase
            • Recommended
            by
            • Verified Purchase
            Showing 1-10 of 495 reviews

            Frequently Bought Together

            ++
            Price: