Compare Similar Products

36 in. Island Canopy Convertible Range Hood in Stainless Steel
current product
36 in. Island Canopy Range Hood in PrintShield Black Stainless
42 in. Island Canopy Convertible Range Hood in Stainless Steel
BrandKitchenAidKitchenAidKitchenAid
Name36 in. Island Canopy Convertible Range Hood in Stainless Steel36 in. Island Canopy Range Hood in PrintShield Black Stainless42 in. Island Canopy Convertible Range Hood in Stainless Steel
Price
$189900
$199900
$209900
Ratings
(61)
(60)
(17)
Maximum Air Flow Capacity (CFM)600 CFM600 CFM600 CFM
Range Hood Size (Width)36 in.36 in.42 in.
Vent Install TypeConvertibleConvertibleConvertible
Amperage (amps)15 A1515 A
Commercial/ResidentialResidentialResidentialResidential
Check Earliest Delivery Date
View ProductView ProductView Product

Customer Reviews

Sort By:
Howell, mi
Great looks.
Customer review from kitchenaid.com logo
I bought this is March and I am very happy with it. [This review was collected as part of a promotion.]
Was this helpful?
0
0
Instructions could use a lot of work, but it's pretty easy to understand what they are looking fo...
Instructions could use a lot of work, but it's pretty easy to understand what they are looking for and what is going on with the install. I have about 7ft of straight 6" pipe and a 45* elbow to vent it out of my roof, it is actually surprisingly quiet, even on high you can hold a reasonable conversation in the room when it's on. That's not to say it's silent you can certainly hear it. but it isn't awful. I have this mounted 35" aboce my gas cooktop 54000 BTU and it does a great job with the smoke and at that height it isn't blocking the room too badly. I bought the Speedi-Products EX-RCGC 06 6-Inch Diameter Galvanized Roof Cap with Collar, Black from amazon. It went in pretty easy I did have to take the screen off and bend it out a bit so the back-draft flap wouldn't rub the screen but that fixed that problem. Looks easy to clear the grease filters though I haven't done that yet. The buttons are capacitance touch which is fine, but they are pretty small and only there is not a demarcation as or any physical / tactile feel to them and they can be a bit hard to read if it's not bright since they are only back-lit when on and the print is pretty small, but they seem to work well. Also I find it a bit annoying that while the corner lights are LED the center (front/back) lights (2 of them) are halogen. The halogen bulbs are end-user replaceable but the LEDs state the must be replaced by a Kitchenaid servicer (though I doubt I'll ever need to). However the halogen bulbs obviously get pretty hot, I guess I don't understand the decision to leave any halogen bulbs in this thing, all LED would make more sense to me. Also the design of the light on/off button seems weird, the first press turns on the 4 corner LEDs which are a bright white probably 3500K-4000K, a second press of the light on/off then turns those LEDs off and turns on the 2 halogen bulbs (Kitchenaid calls these the nightlights) the are probably 2700K but they get so HOT I wouldn't want to waste the energy leaving these on, a 3rd press turns the halogens off and at that point all lights are off and the cycle repeats. I do not know if the lights will automatically shut off or if there is a setting for that, it does not appear so. Overall it's still a great product, I would have totally removed the halogens and had all LED and I would like to see the buttons be raised or provide some sort of tactile feel so you know when you're on them. But it does evacuate smoke well and is much quieter than I was expecting. I have this over a 30" Frigidaire cooktop. I have had this about a month.
Was this helpful?
0
0
La Porte
Looks great in black stainless!
Customer review from kitchenaid.com logo
Works great and looks even better matching with the rest of my black stainless kitchen aid appliances. Only downfall is the installation. It's very difficult and the screws it came with aren't really great quality. Had to buy my own.
Was this helpful?
0
0
corpus christi, tx
GREAT FEAFTURES
Customer review from kitchenaid.com logo
LOVE THE HOOD ALL THREE SPEED AND QUITE WHEN IT IS ON, [This review was collected as part of a promotion.]
Was this helpful?
0
0
Myersville, MD
Great product
Customer review from kitchenaid.com logo
A great improvement over the down draft system I used for year. [This review was collected as part of a promotion.]
Was this helpful?
0
0
Nebraska
Dave
Customer review from kitchenaid.com logo
I just purchased the hood. Short screws for the install. Called customer service, got the run around for serial #. Shouldn't need the serial number to send screws. If the product would have been packaged accurately I wouldn't be short. Now have to get the serial # and call back again, wait in line for next available representative to help me. Shouldn't be that tough to fix your packaging screw up. I need 5 screws to complete the install. Happy with the product, extremely unhappy with the customer service.
Was this helpful?
0
0
S. E. Georgia
Great looks and features
Customer review from kitchenaid.com logo
I’m extremely happy with this purchase. I was concerned when I selected this hood due to the cost. Now I consider the best choice I could have made. [This review was collected as part of a promotion.]
Was this helpful?
0
0
Lisbon Connecticut
Easy to use and has bright lights. Love it.
Customer review from kitchenaid.com logo
I never had a island hood before. I really happy with this model. I also get a lot of compliments on the style. [This review was collected as part of a promotion.]
Was this helpful?
0
0
Michigan
Great features
Customer review from kitchenaid.com logo
I bought a month ago and had been use it. I love it. [This review was collected as part of a promotion.]
Was this helpful?
0
0
Washington
Beautiful
Customer review from kitchenaid.com logo
We are slowly remodeling our house we bought two years ago and we just got this beautiful piece that goes above our large island only a few down sides it did take two days to install instead of two hours and the top of the black stainless steel that goes into the ceiling that’s exposed is a little jagged since it was not precut to fit and will need a custom wood piece put around it to cover it up and a small clip was not put in it on the top to keep it flush so it sticks out on the side but those were all due to the installation not the product [This review was collected as part of a promotion.]
Was this helpful?
0
0
Review this Product
Share your thoughts with other customers