#1 Home Improvement Retailer

Internet # 308673853

Model # VDV770-834

Product Images

Commander Test-n-Map Remote Kit

$169.99
Apply Now
Pay $144.99 after $25 OFF your total qualifying purchase upon opening a new card. 
Apply for a Home Depot Consumer Card
  • Tester Kit to test, map and identify a location in a single step!
  • Test and identify up to eight locations at once with tester
  • Requires Klein Commander™, Scout® Pro LT or Scout® Pro 2 Tester
  • View More Details

Free & Easy Returns In Store

Return this item within 90 days of purchase.

Read Return Policy

Ask about this product

Get an answer now with AI

Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information

Product Details

About This Product

Single-step Test-n-Map Remotes cut cable testing and identification time in half! The remotes ensure fast and accurate cable installations each time. This remote kit works with Klein's line of VDV testers including the Commander and Scout Pro series. Zipper pouch keeps all the pieces readily available.

Highlights

  • Test, map and identify up to 8 locations in a single step
  • Cuts testing and identification time in half
  • Includes: 7 Test-n-Map Remotes (#2 - #8), 8 threaded male to push-on female coaxial push-on F adapters, 8 RJ45 jumper test cables, Test-n-Map Remote Verification Test Cable (18 in.), zipper bag
  • Included jumper cables connect the Test-n-Map Remotes to wall outlets
  • Use the Test-n-Map Remote Verification Test Cable (included) to conduct a validation test or another cable that is at least two feet in length
  • Requires Klein Commander, Scout Pro LT or Scout Pro 2 Tester -- sold separately
  • Zipper pouch holds all of the pieces in one place
  • Cordura is a registered trademark of INVISTA
  • 1 test-n-map remote verification test cable
  • 1 padded Cordura zipper bag
  • Click here for more Klein Tool products
  • Shop all Klein Tools probes and test leads here
  • Return Policy
  • California residents
     see Prop 65 WARNINGS

Product Information

Internet # 308673853

Model # VDV770-834

Specifications

Details

Returnable

90-Day

Warranty / Certifications

Manufacturer Warranty

Please refer to the attached warranty document in the Product Overview section above under Info & Guides.

Questions & Answers

Will this work with the Scout Pro 3? I know the LAN map devices do even though they only list support for Scout Pro 2.
ByApr 2, 2021
1 Answer | 
Answer This Question

Yes, the Commander Test-n-Map Remote Kit works with the Scout Pro 3.

By|Apr 2, 2021


    Viewing 1-1 of 1

    Customer Reviews

    4.8 out of 5

    • 4.8 out of 5 reviews
    • 100% recommend this product
    Filter by:
    Showing 1-5 of 5 reviews
    This product is a great companion to the Klein Tools VDV Commander Tester. This Test-n-Map Remote...
    This product is a great companion to the Klein Tools VDV Commander Tester. This Test-n-Map Remote kit provides seven Test-n-Map remotes (numbers 2-8) for RJ-11, RJ-45 and Coax; eight coax F adapters (threaded male to push on female); eight 9” RJ-45 jumper cables; two 9” RJ-11/RJ-12 jumper cables; one 18” RJ-45 cable; and one padded zipper pouch to hold all parts. I performed testing of the Test-n-Map remotes with a VDV Commander Tester across a known good section of CAT5e cable run between a patch panel and an outlet. After validating the cabling with the VDV Commander I introduced a number of faults with a customized patch cable and swapped in different Test-n-Map remotes with each test. In all cases the VDV Commander recognized the specific Test-n-Map remote ID except when I introduced multiple faults in the same cable (short on pair 4, miswire on pairs 1 & 2 and open on pairs 1 & 2). I suspect the ID function must require pair 1 and/or pair 2 to be connected to function. If you need to test multiple cable runs, adding this kit to your VDV Commander will absolutely increase your productivity.
    by
    • Recommended
    This is an outstanding addition to your Commander or Scout electronic testing devices. The standa...
    This is an outstanding addition to your Commander or Scout electronic testing devices. The standard devices will tell you if you are connected to the same wire and if it is wired correctly. By adding this kit, you can map out the locations of 7 lines in one operation. It has 7 ends that send a location number up the line. You can go to your central point and quickly identify what goes where. It operates just line the basic tool except it adds a location number (2-8) The test end that comes with your kit is already number 1. This includes adapters for testing coax and jumper cables for identifying and testing wall jacks. It also comes with a carrying case to keep everything together. This is a great kit.
    by
    • Recommended
    I combined this with my Klein Scout Pro 2. I like to mess around with my home networking and rec...
    I combined this with my Klein Scout Pro 2. I like to mess around with my home networking and recently installed a patch panel. I have used this commander test n map to map out and label each jack. I plugged in each rj45 cable and then went to my basement and could test each location. That allowed me to stay downstairs and label each rj45 jack. It saved me a lot of time and now I have it for my next home or even business. It comes with 7 remote rj45 connectors and 8 coaxial connectors. It also comes with 8 ethernet jumper cables and pouch to carry everything.
    by
    • Recommended
    This kit is a great addition to the Klein Commander™, Scout® Pro LT or Scout® Pro 2 tester. You ...
    This kit is a great addition to the Klein Commander™, Scout® Pro LT or Scout® Pro 2 tester. You can Test, map and identify up to 8 locations in a single step. Includes: 7 Test-n-Map™ Remotes (#2 - #8), 8 threaded male to push-on female coaxial push-on F adapters, 8 RJ45 jumper test cables, Test-n-Map™ Remote Verification Test Cable (18-Inch), zipper bag Included jumper cables connect the Test-n-Map™ Remotes to wall outlets Use the Test-n-Map™ Remote Verification Test Cable (included) to conduct a validation test or another cable that is at least two feet in length Requires Klein Commander™, Scout® Pro LT or Scout® Pro 2 Tester -- sold separately Zipper pouch holds all of the pieces in one place
    by
    • Recommended
    This is a great add-on to the Commander tester. However, for the price of the commander, I think ...
    This is a great add-on to the Commander tester. However, for the price of the commander, I think these should already have been included. This is for the professional installer, not the casual home owner. This kit will pay for itself on the first job if you charge by the job instead of by the hour. If you charge by the hour, don't get this, it will save you too much time. Being able to rapidly walk through a home or office, connect the remotes and go through an entire test of 8 locations at once means you can knock out the jobs quickly and schedule more each day. Again, I only recommend these for the professional. I replaced an older Fluke tester with the Commander and having the remote kit saves so much time in moving the remote to each location and running back to the hub for tests. However, I do not care for the case, it is simply a zippered pouch, and I would have preferred if it would have come with a larger case to hold the Commander with it so that I have less items to carry around.
    by
    • Recommended
    Showing 1-5 of 5 reviews