#1 Home Improvement Retailer

Internet # 206079387

Model # LTP8000

Store SKU # 1001371048

80 Amp Non-Touch Pilot Arc IGBT Inverter Plasma Cutter for Metal, 220V, 1 inch Clean Cut

Apply Now
Pay $700.12 after $50 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
0 in stock
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy

Product Details

About This Product

The Lotos LTP8000 Plasma Cutter is one of the most powerful plasma cutters in the market. The pilot arc feature is especially useful for continuous cutting on rough surfaces or dirty metal. It has been redesigned to incorporate the latest high frequency inverter technology using V-MOSFETs, along with PWM (Pulse Width Modulation), the combination of which help deliver a far more constant, concentrated and precise current to the cutting surface. With this plasma cutter the user can achieve smooth, clean and uniform cuts on a wide range of surfaces with minimal heat input and without distortion of metal. It is very easy to use by the DIY user, while fully accommodating the demands of professional operators.


  • 80 Amp IGBT inverter pilot arc plasma cutter, 1 inch clean cut
  • Automatic dual frequency (50/60 Hz)
  • High frequency start and contact start hand torch
  • Suitable for stainless steel, alloy steel, mild steel, copper, brass and aluminum, etc. ideal use 1 in. (25.4 mm) at 80 Amp
  • Cuts rough or dirty metal
  • Air supply: clean, dry, oil-free air
  • Input power cable length: 6 ft. (1.8 m)
  • Weight: 52 lbs. (23.6 kg)
  • Compatible consumables are Lotos BCON only.
  • Package includes: Plasma cutting torch CB172 (17ft long, 2 pin connection); Ground clamp (6ft long); Air hose (6ft long); 4 air hose clips and 2 air hose connections; Air filter gauge AR01; Mounting bracket for air filter AR01; Air filter AR01 and user Manual
  • Click here for more information on Electronic Recycling Programs
  • Return Policy

Product Information

Internet # 206079387

Model # LTP8000

Store SKU # 1001371048

Additional Resources

Shop All Lotos
From the Manufacturer


Dimensions: H 12 in, W 8.5 in, D 21 in


Product Depth (in.)

21 in

Product Height (in.)

12 in

Product Width (in.)

8.5 in


Duty Cycle (%)


Engine Power

Electric (AC)


Additional Tips, Tips, Torch

Input Power (Volts)


Maximum amperage output (amps)


Minimum amperage output (amps)


Rated Output (Volts)


Recommended Cutting Capacity




Welder Type

Plasma Cutter

Warranty / Certifications

Manufacturer Warranty

Lotos Technology warrants that all equipment sold by our company, unless otherwise specifically stated, will be free from defects in materials and workmanship for a period of 1 year from date of shipment. Such warranty shall not apply in any event to failure or defects in materials due to normal wear and tear, failure to perform recommended or customary maintenance procedures, exposure to detrimen

Questions & Answers

Q:Can't find picture of electric plug
by|Mar 20, 2019
1 Answer
Answer This Question

A:  It's 220V Nema 6-50 plug

by|Apr 1, 2019
    Q:will it work with cnc
    by|Nov 22, 2018
    2 Answers
    Answer This Question

    A:  No, this product is not ideal for CNC.

    by|Nov 25, 2018

      A:  HI, It is high frequency arc start, so will case interference to your CNC computer. We do not recommend to use with a CNC. Thanks for your iniquiry Regards Lotos Technology

      by|Jun 23, 2019
        1 found this answer helpful
        Q:will this be available in the near future or is it discontinued
        by|Aug 14, 2018
        1 Answer
        Answer This Question

        A:  Hi kb, Per our vendor, this 80 Amp Non-Touch Pilot Arc IGBT Inverter Plasma Cutter for Metal, 220V, 1 inch Clean Cut has an estimated arrival for online stocking of late August which is subject to change. If you would like to be notified with updates on the status of this item, you can enter your email address into the field provided on the product's page. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot!

        by|May 5, 2023
        Q:Can I switch the plug so it works with my welder?
        by|Mar 28, 2018
        1 Answer
        Answer This Question

        A:  Hi, Yes, you can switch the plug. We suggest to use a 220~250V 50AMP plug. Thanks for your inquiry Regards Lotos Technology

        by|Mar 11, 2021
          1 found this answer helpful
          Showing 1-4 of 13

          Customer Reviews

          4 out of 5

          • 4 out of 8 reviews
          • 67% recommend this product
          Filter by:
          Showing 1-8 of 8 reviews
          Haven't had a lot of time to get familiar with the plasma cutter but what I have done, it exceeded my expectations.
          • Verified Purchase
            Excellent all around machine
            Ludlow metal art. In the last 4 years I've had 4 different plasma cutters. I have had problems with all of them different problems every time. I would have to send machines in and would be without for at least a month lost alot of work. Finally I purchased a Lotos 80 amp. I cut alot of 20ga.sheet but I also cut 1/4 1/2 3/4 and this machine is perfect. I have had a couple times I have called there service support in Sunnyvale sometimes with questions. There team is always helpful mostly answer and fix my problem the same call.That means alot to me. There support is great and I can feel confident in there machines.
              • Recommended
              Scam. Do Not Buy, Empty box from China
              Just ordered and delivered. The machine weighs less than 10 pounds and is completely empty on the inside. There is no transformer, nothing but a power cord that isnt connected to anything. Just like buying the empty speakers from the back of a van. You would think Home Depot wouldnt be a party to this type of deceit? Guess not
                1 found this review helpful
                The Lotos plasma cutter worked great right out of the box. No problems and I could cut 3/8" plat...
                The Lotos plasma cutter worked great right out of the box. No problems and I could cut 3/8" plate steel easily.
                • Verified Purchase
                • Recommended
                I bought this machine dec 2015,i didn't use the machine till 2017,i understood that my warranty w...
                I bought this machine dec 2015,i didn't use the machine till 2017,i understood that my warranty was out,the first time to try the machine,it didn't work,i call lotus to see if the machine could be repaired, then I was told they do not have a facility that can repair them,and basically was told to find one on my own.my advice is try the machine the day you get, and after the year warranty is over, your on your own !
                  3 found this review helpful
                  Lotus 8000
                  Great machine!!! Easy to use cuts great. Be better if you carry replacement parts and peace's for them
                    • Recommended
                    Works really well. I've had mine for quite some time now.
                      • Recommended
                      Showing 1-8 of 8 reviews

                      Compare Similar Items