Picasso Ledger Panel 6 in. x 24 in. Natural Travertine Wall Tile (10 cases / 60 sq. ft. / pallet)

Thank you for your interest in a MSI product. Please send the pictures of the material which you have received of 80 square foot by contacting a Home Depot customer service or visit your nearest Home Depot store to avail the right material. Good luck with your project.

Thank you for your interest in a MSI product. Please note MSI named this material as ROCKMOUNT Silver Travertine Panel. However, please inspect the material and contact Home Depot for more assistance. Good luck with your project.

product website list a thin set mortar to use. HD carries it.

Thank you for your interest in the MSI Philadelphia Ledger Panel. These tiles can be installed on a shower wall as long as all proper preparations are made. Good luck with your project!

Thank you for your interest in the MSI Silver travertine Mini Ledger Panel. Please see the following examples of trims that may work: https://www.homedepot.com/p/MSI-Ivory-Pencil-Molding-3-4-in-x-12-in-Honed-Travertine-Wall-Tile-1-lin-ft-THDW1-MP-IVO/100664339, https://www.homedepot.com/p/MSI-Absolute-Black-2-in-x-12-in-Polished-Granite-Rail-Molding-Wall-Tile-10-lin-ft-case-SMOT-RAIL-PBLK/100664289. Good luck with your project!

Thank you for your interest in the MSI Philadelphia Ledger Panel Tile. Please contact your local Home Depot to inquire if other purchasing options are available for this item. Good luck with your project!

You have to find a suitable adhesive to bind with the metal. As you are on the top of the fire box this will encounter the most heat. You might give a thought to using 1/4 hardie board over the metal surround and any wall area you are applying the stone too. Minimal build out and still get the sleek install look your going for. I would be afraid to use a polyurethane adhesive on the metal for fear of the heat from the firebox. Plus you can get bleed through from the adhesive as the stone is very porous

There are 144 square inches in a square foot. That works out to be about .07 lbs (1.12 oz) per sq inch. If you're hanging over drywall, then I'd replace it with hardibacker(concrete board). Any other substrate should be just fine.

Thank you for your interest in the MSI Trevi Gray Ledger Panel. We recommend using an impregnator sealant for this tile. Good luck with your project!

Thank you for your interest in the Trevi Gray Ledger Panel. This can be installed vertically with no issue. Good luck with your project!