Top Rated


Return this item within 90 days of purchase.
Get an answer now with AI
AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.
MSI Sierra Blue Ledger Panel Wall Tile is a Natural Stone Quartzite with a multicolor blend of grey, rust and white tones. Seemingly random strips of tile are glued together to form a panel that is easy to install. This frost resistant tile is suitable for indoor or outdoor walls in residential and commercial installations. Note: Inspect all tiles before installation. Natural stone products inherently lack uniformity and are subject to variation in color, shade, finish, etc. It is recommended to blend tiles from different boxes when installing. Natural stones may be characterized by dry seams and pits that are often filled. The filling can work its way out and it may be necessary to refill these voids as part of a normal maintenance procedure. All natural stone products should be sealed with a penetrating sealer. After installation, vendor disclaims any liabilities.
Approximate Tile Size | 6x24 |
|---|---|
Product Length (in.) | 23.62 in |
Product Thickness (mm) | 19.05 mm |
Product Width (in.) | 5.9 in |
Application Location | Backsplash, Wall |
|---|---|
Color Family | Blue |
Color/Finish | Sierra Blue |
Edge Type | Flat |
Flooring and Tile Look | Stone Look |
Flooring Product Type | Quartzite |
Indoor/Outdoor | Indoor, Outdoor |
Location | Bathroom, Fireplace, Garage, Kitchen, Living Room, Patio |
Returnable | 90-Day |
Tile Features | Frost Resistant, Radiant/Underfloor Warming Heating |
Tile Finish | Textured |
Tile Format | Standard |
Tile Material | Quartzite |
Water Protection | Water Resistant |
Manufacturer Warranty | 1-year limited warranty |
|---|
Unfortunately, this product is not recommended for use in shower areas due to its textured surface and maintenance requirements. We truly appreciate your understanding.
We do not recommend installing this ledger panel directly on a glass wall, as it requires a solid, porous substrate for proper adhesion and support. We appreciate your understanding!
Yes, this quartzite panel can be used to face a wood-burning fireplace when installed on a proper heat‑rated substrate with suitable adhesive. Good luck with your project!
Yes, the quartzite color and material run all the way through, so cut end pieces will show the stone’s natural color and texture. For a cleaner look, consider using corner or trim pieces. Good luck with your project!
Yes, it can be used as an accent wall in a wet room or walk-in shower. Since it is natural stone, sealing with a penetrating sealer is required before and after installation, along with proper waterproofing behind the tile.
Yes, this can be installed over drywall with the help of a backer board. Good luck with your project!
To fill in the gaps between your splitface quartzite tiles, use a light gray or white grout, such as Warm Gray or Platinum from Custom Building Products or Bright White or Platinum from Laticrete SpectraLOCK. Be sure to choose a grout suitable for stone and seal it once dry to prevent staining.
Each panel measures 6 in. x 24 in. If the staggered ends are trimmed to create a square edge, the final length will vary depending on how much material is removed during cutting. We appreciate your understanding!
Viewing 1-8 of 141
4.2 out of 5