Conceal your irrigation components and protect against damage with the 10 in. Round Valve Box and Cover. Built for durability with structural reinforcing ribs, this valve box and lid stands up to the elements, pedestrian traffic, lawn care equipment, and deflects potential vandalism. The round black valve box includes a pipe hole for irrigation pipe connections. The overlapping green irrigation control valve (ICV) cover blocks dirt and debris from entering the valve box. The cover has two finger holes to easily twist open and remove lid for maintenance. Box is made of polypropylene (PP) using 100% recycled material and cover is made of high-density polyethylene (HDPE) using a combination of virgin and recycled material. Both the box and cover are treated with UV inhibitors to prevent fading and cracking due to sun exposure. NDS is a leading manufacturer of water management solutions and the trusted brand of professional landscape contractors since 1972. Check out the NDS website or reach out to us for technical support-our friendly, experienced team is here to help make your project a success.
Protect irrigation system components from the elements, foot traffic, lawncare equipment, and potential vandalism, and keep them out of sight
Use to protect irrigation system components
Fits over irrigation fixtures such as a valve, control zone kit, and other irrigation accessories
Box top dimensions: Top inside dimension (ID) 9-1/8 in. diameter; top outside dimension (OD) 9-11/16 in. diameter; Box bottom dimensions: Bottom ID 11-11/16 in. diameter; Bottom OD 12-13/16 in. diameter
Box height: 9-15/16 in.; Box pipe hole dimensions: 2-3/8 in. X 2-15/16 in.
Lid dimensions: Top dimension is 9-1/2 in. diameter; bottom dimension is 8-11/16 in. diameter; rim thickness 1/2 in.; overall height 1-3/8 in.
Valve box and lid support pedestrian traffic and lawn care equipment
Structural reinforcing ribs provide support and strength to protect items housed inside against damage
Overlapping cover prevents dirt and debris from entering the box; ICV designation; two-fingerhole design
Pipe hole facilitates irrigation pipe connections without having to dig under the box. N/A
Comes with one 10 in. round valve box and cover
Build valve and connect pipe(s); dig to allow enough depth so the lid is flush with the surface; add layer of gravel for drainage before placing box and cover in place, thread irrigation pipe through the hole; backfill
Box is made of polypropylene (PP) using 100% recycled content treated with UV inhibitors to prevent fading and cracking. Lid is made of high-density polyethylene (HDPE) using a combination of virgin and recycled content treated with UV inhibitors to prevent fading and cracking
NDS Valve Boxes and Covers are available in a variety of sizes, shapes, and colors
Use the valve box to protect irrigation components such as a control zone kit for your drip irrigation system
Hassle-free 1-year warranty guarantees this NDS product is free from defects-or we'll replace it
NDS products are available at major home centers, retailers, and online. Check out NDSpro.com or reach out to us for technical support at 800.726.1994. Our friendly, experienced team is here to help make your project a success
Founded in 1972, NDS is the preferred choice of professionals and the leader in water management solutions with proven products, tools, and support to help you get the job done right
Q:Will this cover an offset 45 degree angle in a sewer line over a cleanout?
by|Apr 23, 2022
2 Answers
Answer This Question
A:Â The NDS 10" Valve Box/Cover could be used as an access point for a 4" cleanout, for a 10" cleanout , NDS recommends the 10" Box/Cover.
by|Apr 25, 2022
A:Â You would need to provide more info about sizing for the situation. Depending on the size of the pipe and length it could work. If something is too big a rectangular ground utility cover would be better.
by|Apr 26, 2022
Q:What are the actual dimensions of this cover?
by|Aug 2, 2021
2 Answers
Answer This Question
A:Â 10 INCH
by|Feb 24, 2023
A:Â The outside dimension is 9-5/8".. inside dimension is 9-1/2"
by|Jun 16, 2022
2 found this answer helpful
Q:Does the lid say: Reclaimed Water Do not drink No tome And have the no drink symbol?
by|Aug 10, 2020
1 Answer
Answer This Question
A:Â Yes.. the lid does have these statements as well as the "no drink" symbol.
by|Aug 11, 2020
Q:Where can I find the screw to lock the lid? Why is it not sold with the box???
by|Jul 12, 2018
4 Answers
Answer This Question
A:Â There is no screw. You can drill into the side near the top and put your own screw if you wish. This is used instead of a rectangular box such as when access is needed to a single valve. When the ad says box, it is referring to the round black part.
by|May 6, 2023
A:Â Most don't require a screw
by|Mar 27, 2023
A:Â Not sure ware to get screw but most are used without being screwed down i never have had to secure the lid
by|Jun 25, 2021
A:Â Hello helen,
Thank you for your inquiry with The HomeDepot.com.
I would suggest you visit your local Home Depot store for assistance with this issue. Someone at the service desk should be able to help you. Sorry for the inconvenience this may cause.
by|May 5, 2023
Showing 1-4 of 10
Customer Reviews
4.7 out of 5
(288)
4.7
out of 288 reviews
95% recommend this product
5216
456
312
22
12
Filter by:
Showing 1-10 of 288 reviews
Jan 29, 2020
I installed a sewer access and also used this product (yard box) worked out great! Thank you Home...
I installed a sewer access and also used this product (yard box) worked out great!
Thank you Home Depot!
by
Verified Purchase
Recommended
Jan 16, 2019
Used this to replace an old bucket the prior owner had used as a cover for a curb side water shut...
Used this to replace an old bucket the prior owner had used as a cover for a curb side water shut off in a rural area. It would have been too shallow but the lower casing around the pipe was still intact. Looks nice and the quarter turn to remove the nice solid lid works great.
by
DIY
Verified Purchase
Recommended
May 1, 2018
Works great, ridged body, cap fits well.
Works great, ridged body, cap fits well.
by
Verified Purchase
Recommended
Oct 10, 2017
Worked prefect, had to keep the control valve water tight on the roof.
Worked prefect, had to keep the control valve water tight on the roof.
by
Verified Purchase
Recommended
Dec 2, 2016
A great product that was just the right size and very easy to install. Covered my water shut off ...
A great product that was just the right size and very easy to install. Covered my water shut off valve and gave me easy access to the valve for those emergency shut offs when needed.
by
Verified Purchase
Recommended
1 found this review helpful
Aug 12, 2016
Blocks critters & works in concrete
With the addition of hardware cloth underneath and around the pipes, keeps gophers and voles from filling the box with dirt from their tunneling. Also works in concrete to maintain access to shutoff valves.
Also, replacement covers can be ordered from: http://www.homedepot.com/p/NDS-10-in-Round-Valve-Box-Overlapping-ICV-Cover-111C/100140418
Less than $5.
by
Recommended
2 found this review helpful
Sep 30, 2014
These things do just what they say they will do
We use these for in ground electric box tie ins .For a septic system pump station . Holds all the wires in one place very well. Yes my electrician know all about it . And use's them him self
by
Pro
Verified Purchase
Recommended
1 found this review helpful
Sep 16, 2014
Perfect size, strong 10" valve box.
I needed a smaller valve box next to my larger one and found this 10" valve box to be the ticket! Was very easy to install and feels very strong. I can stand on it and it takes my weight without any problems. Home Depot had this valve box for a great price. Much lower then other stores were selling it for. Their personnel showed me where they were located and I was out of the store to get back to my project quickly. Thanks to Home Depot for stocking this item!
by
DIY
Verified Purchase
Recommended
1 found this review helpful
Jun 30, 2014
Works great
Bought these to place my sprinkler and plant valves in for my yard recently. I also used a box for a valve to drain my system for the winter and another box for an in-line filter for the sprinkling system. All very functional and easy to cut with a hacksaw if needed. I used empty plastic 5-quart ice cream containers to raise the boxes when needed or plug up the slots for pvc water lines (to keep out rocks and soil). I also used a hole saw to connect pvc pipe for sprinkler wire connections to the valves and timer. We placed bark and pavers over the boxes to hide them.
by
DIY
Verified Purchase
Recommended
7 found this review helpful
Apr 24, 2013
Good product
I used this valve box to house a hose bib out in the yard. It is good quality and meets my need. I like that the lid locks by twisting it.
10 in. Round Standard Series Access Box and Cover, 10 in. Height, Purple, Purple Reclaimed Water Cover
Protect and easily identify reclaimed waterProtect and easily identify reclaimed water irrigation system components with the 10 in. Round Standard Series Purple Valve Box and Cover. The durable valve box and designated lid are built with structural reinforcing ribs to protect components from the elements, pedestrian traffic, lawn care equipment, and potential vandalism. Ideal for covering a single valve, control zone kit, or other irrigation accessories. The round valve box includes a pipe hole to make direct irrigation pipe connections. The cover has a bolt hole and brass nut to lock down lid using a 1-3/4 in. X 5/16 in. bolt, (111BBX2, sold separately) and features two finger holes to twist open and remove lid for maintenance. Both the box and cover are made of high-density polyethylene (HDPE) using a combination of virgin and recycled material treated with UV inhibitors to prevent fading and cracking due to sun exposure. NDS is a leading manufacturer of water management solutions and the trusted brand of professional landscape contractors since 1972. Check out the NDS website or reach out to us for technical support-our friendly, experienced team is here to help make your project a success.View Full Product Description
14 in. X 19 in. Rectangular Standard Series Valve Box Extension & Cover, 6-3/4 in. Height, Green Box, Green ICV Cover
Boost the height of a traditional valve boxBoost the height of a traditional valve box that sits lower in the ground with the 14 in. X 19 in. Standard Series Green Valve Box Extension and cover. The extension sits on top of an existing valve box to achieve that additional height or can be used alone for shallow installations to protect and conceal valves, control zone kits, and other irrigation system components. Engineered with structural reinforcing ribs, the green extension box and green cover are built to stand up to the elements, pedestrian traffic, lawn care equipment, and potential vandalism. The overlapping lid blocks dirt and debris from entering the valve box to keep the area clean and is marked for Irrigation Control Valve (ICV) use. Convenient slot makes lid easy to lift with a flathead screwdriver. The extension is made of high-density polyethylene (HDPE) using 100% recycled materials; the lid is made of high-density polyethylene (HDPE) using a 83% recycled materials. Both the extension irrigation valve box and lid are treated with UV inhibitors to prevent fading and cracking from sun exposure. NDS is a leading manufacturer of water management solutions and the trusted brand of professional landscape contractors since 1972. NDS products are available at major home centers, retailers, and online. Check out the NDS website or reach out to us for technical support-our friendly, experienced team is here to help make your project a successView Full Product Description
10 in. X 15 in. Rect. Standard Series Meter Box & Drop-in Cover, Black Box, Black Cover with Reader Door, Water Meter
Keep your irrigation system components safeKeep your irrigation system components safe and out of sight with the 10 in. X 15 in. X 10 in. Meter Box and Cover. The meter box fits over valves, control zone kits, and other irrigation accessories to protect from damage. Durable drop-in cover provides easy access for maintenance and reader door allows for easy meter reading. Built with structural reinforcing ribs, the black box and black cover are built to stand up to the elements, pedestrian traffic, lawn care equipment, and potential vandalism. Convenient slot makes drop-in lid easy to lift with a flathead screwdriver. The meter box is made of polypropylene (PP) using 100% recycled materials; the lid is made of polypropylene (PP) using 100% recycled materials. Both the irrigation meter box and lid are treated with UV inhibitors to prevent fading and cracking from sun exposure. NDS is a leading manufacturer of water management solutions and the trusted brand of professional landscape contractors since 1972. NDS products are available at major home centers, retailers, and online. Check out the NDS website or reach out to us for technical support-our friendly, experienced team is here to help make your project a successView Full Product Description
10 in. x 15 in. Rectangular Water Meter Valve Box and Snap-In Lid (Black Box, Green Lid)
Jones Stephens has built its reputation overJones Stephens has built its reputation over the years as a leader in the plumbing industry, providing the market with thousands of products to complete any project. If you need it, we got it. This Water Meter Valve Box features plastic construction and a snap-in lid. Manufactured of corrosion resistant materials, all parts are designed with quality engineering and construction to be durable and reliable and to meet Jones Stephens highest quality standards. The 10 in. box has a 10 in. height with a 19 in. x 13.25 in. overall width and depth when measured on the outside of the bottom of the box. Used to protect outdoor water meters from foot traffic, weather, and lawn mowers. Note: for non-vehicular applications. Concrete and asphalt installations are not recommended for plastic parts. Available in a variety of sizes, shapes and materials.View Full Product Description