Connect and align 2 in. X 3 in. rain gutter downspout to 4 in. Sewer and Drain (S&D) pipe with the HIPS Offset Downspout Adapter. The offset design allows for proper alignment of drainage pipe beneath a downspout fastened directly against the building wall. The Offset Downspout Adapter drain fitting is made of high-impact polystyrene (HIPS) and makes a Downspout X Hub connection. Meets applicable ASTM standards. For use in non-pressurized drainage applications; maximum working pressure of 5 psi. Hassle-free limited lifetime warranty guarantees the NDS product is free from defects—or we’ll replace it. Get scalable stormwater management solutions for residential, commercial, and industrial applications at NDS. Free tools and calculators, store locator, and support available on the NDS website and NDS Stormwater Drainage mobile app. Whether you’re a homeowner, contractor, specifier, or distributor, we’re here to help make your project a success.
Conveys water from downspout to drain pipe
Connects 2 in. X 3 in. Downspout to 4 in. Sewer & Drain (S&D) pipe in non-pressurized drainage systems
Attach 2 in. X 3 in. end to downspout and connect other end to 4 in. S&D pipe
Downspout adapter made of high-impact polystyrene (HIPS) using a combination of virgin and recycled content treated with UV inhibitors to prevent fading and cracking
Meets applicable ASTM standards
Comes with one HIPS Offset Downspout Adapter
Use with Pop-Up Drainage Emitters to discharge water at a point of release
Use sewer and drain fittings when you need to transition between different pipe types and sizes, or to change direction and make connections in the pipeline
Onsite stormwater management protects the watershed downstream, and limits excess runoff which can lead to negative impacts such as erosion, pollution, and flooding
Hassle-free limited lifetime warranty guarantees the NDS product is free from defects-or we'll replace it
NDS offers free tools such as the Home Drainage Center, Calculators, and NDS Stormwater Drainage mobile app to help make your project a success
Founded in 1972, NDS is the preferred brand trusted by professionals with proven products, tools, and support for any size project
3 inch was little bigger than my gutter but good...
3 inch was little bigger than my gutter but good product.
by
Verified Purchase
1 found this review helpful
Apr 5, 2022
These downspout adapters that connect the 4-inch pipe to the...
These downspout adapters that connect the 4-inch pipe to the downspout of the guttering works very well good fit easy to install no glue needed
by
Verified Purchase
Feb 15, 2022
by
Verified Purchase
Oct 5, 2021
by
Jul 17, 2021
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by
Verified Purchase
Jun 25, 2021
by
Verified Purchase
May 18, 2021
This fit all the different downspouts I tried it on,...
This fit all the different downspouts I tried it on, the rectangular part is fairly universal. The round connects to 4” drainage pipe. You might need to use screws to attach the fitting to the gutter downspout, dependent on use.
by
Response from THD-CSOMay 24, 2021
Dear Valued Home Depot Customer,
We have reached out to the manufacturer and their reply is,It's great to hear about the success of your project! Thanks for taking the time to comment and for choosing NDS.
The 4 in. PVC Elbow makes a 45° turn in 4The 4 in. PVC Elbow makes a 45° turn in 4 in. sewer and drain (S&D) pipe runs. The 45° Ell also connects to select drainage products compatible with 4 in. S&D connections such as channel drain outlets, Flo-Well® Dry Well System, drainage grates, and pop-up emitters. The drain fitting is made of polyvinyl chloride (PVC) for Hub X Hub solvent-weld connections. Meets applicable ASTM standards. For use in non-pressurized underground sewer and drainage applications; maximum working pressure of 5 psi. This elbow is used to make a change in direction in the pipeline and connects two pipes of the same type and diameter size. Hassle-free limited lifetime warranty guarantees the NDS product is free from defects—or we’ll replace it. NDS offers free tools such as the Home Drainage Center, Calculators, and NDS Stormwater Drainage mobile app to help make your project a success. Founded in 1972, NDS is the preferred choice of professionals and the leader in stormwater management solutions with proven products, tools, and support to help you get the job done right.View Full Product Description
PVC S&D 45° Wye, 4 in. Hub X Hub X Hub
The 4 in. PVC Wye adds a 45° angle to anThe 4 in. PVC Wye adds a 45° angle to an existing 4 in. sewer and drain pipe run and connects three lengths of pipe. It also connects to select drainage products such as channel drain outlets, Flo-Well® Dry Well System, drainage grates, and pop-up emitters. The drain fitting is made of polyvinyl chloride (PVC) for Hub X Hub X Hub solvent-welded connections. Meets applicable ASTM standards. For use in non-pressurized underground sewer and drainage applications; maximum working pressure of 5 psi. This wye is used to add an intersection to the pipeline and connect three pipes of the same type and diameter size. Hassle-free limited lifetime warranty guarantees the NDS product is free from defects—or we’ll replace it. NDS offers free tools such as the Home Drainage Center, Calculators, and NDS Stormwater Drainage mobile app to help make your project a success. Founded in 1972, NDS is the preferred choice of professionals and the leader in stormwater management solutions with proven products, tools, and support to help you get the job done right.View Full Product Description
PVC Adapter, 4 in. DWV/SCH40 Hub X S&D Hub
Connect 4 in. Drain Waste Vent (DWV)/ScheduleConnect 4 in. Drain Waste Vent (DWV)/Schedule 40 (SCH40) pipe to 4 in. Sewer and Drain (S&D) pipe with the PVC Adapter. The drain fitting also connects 4 in. DWV/SCH40 pipe to select drainage products compatible with 4 in. S&D connections such as channel drain outlets, drainage grates, and pop-up emitters. This adapter is used to connect two different pipe types. The adapter is made of polyvinyl chloride (PVC) and makes a Hub X Hub solvent-weld connection. Meets applicable ASTM standards. For use in non-pressurized underground sewer and drainage applications; maximum working pressure of 5 psi. Hassle-free limited lifetime warranty guarantees the NDS product is free from defects—or we’ll replace it. NDS offers free tools such as the Home Drainage Center, Calculators, and NDS Stormwater Drainage mobile app to help make your project a success. Founded in 1972, NDS is the preferred choice of professionals and the leader in stormwater management solutions with proven products, tools, and support to help you get the job done right.View Full Product Description
FloLock 1 in. PVC Compression Male Adapter
The FloLock 1 in. PVC Compression Male AdapterThe FloLock 1 in. PVC Compression Male Adapter features push-to-fit connections to help make installation easy. The adapter has a maximum working pressure of up to 200 psi. Gives you fast, easy installation.View Full Product Description