Return this item within 90 days of purchase.
Get an immediate answer with AI
AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.
Connect 4 in. Drain Waste Vent (DWV)/Schedule 40 (SCH40) pipe to 4 in. Sewer and Drain (S&D) pipe with the PVC Adapter. The drain fitting also connects 4 in. DWV/SCH40 pipe to select drainage products compatible with 4 in. S&D connections such as channel drain outlets, drainage grates, and pop-up emitters. This adapter is used to connect two different pipe types. The adapter is made of polyvinyl chloride (PVC) and makes a Hub X Hub solvent-weld connection. Meets applicable ASTM standards. For use in non-pressurized underground sewer and drainage applications; maximum working pressure of 5 psi. Hassle-free limited lifetime warranty guarantees the NDS product is free from defects-or we'll replace it. NDS offers free tools such as the Home Drainage Center, Calculators, and NDS Stormwater Drainage mobile app to help make your project a success. Founded in 1972, NDS is the preferred choice of professionals and the leader in stormwater management solutions with proven products, tools, and support to help you get the job done right.
Double Fitting Size | 4" x 4" | Fitting 1 size | 4" |
---|---|---|---|
Fitting 2 size | 4" | Fitting Size Dimensions | 4" x 4" |
Product Length (in.) | 2 in | Single Fitting Size | 4" |
Application | Non-Potable Water | Color Family | White |
---|---|---|---|
Color/Finish | White/Matte | Compatible Pipe Material | PVC |
Connection 1 | Hub | Connection 2 | Hub |
Connectivity | Hub | DWV | DWV |
Features | Corrosion Resistant | Fitting or Connector Type | Coupling |
Fitting/ Connector Collection | Sewer & Drain | Material | PVC |
Maximum working pressure (psi) | 5 | Maximum Working Temperature (F) | 140 |
Pack Size | 1 | Pipe or Fitting Product Type | Fittings & Connectors |
Product Weight (lb.) | .73 lb | Reducing Fitting | No |
Returnable | 90-Day | Schedule Type | Schedule SDR35 |
Manufacturer Warranty | Limited Lifetime |
---|
Hi Lonny, the increaser or reducer adapter will allow you to connect to a 3" S&D SDR35 pipe not a 3" Sch40.
Hi G001, we only offer the I.D dimension for the 3P16 4.52" I.D DWV HUB x 4.23" I.D S&D SDR35 HUB. You are always welcome to contact us at 800-726-1994 ext. 3 for Technical Support with your question. Thank you.
Hi Greg, If you are referring to the Hub end of the fitting. Here are the two dimensions for those I.D 4.52" (S&D) x 4.23" (DWV/Sch40)
4’’
As space permits, I'd recommend you use an adapter fitting (S&D to DWV) and a reducer fitting (DWV) in series.
Probably not. You will probably find it in 6"x4". Six inch in diameter and four inches in length. Because you have two inches for over lapping on both sides.
NDS makes a 6 in. PVC DWV to S&D Adapter Bushing. It is Mfr # 2P43.
Large end is 4.5" inside and 5" outside, small end 4.25" inside and 4.5" outside.
The dimensions of this product are as follows, Height (in.)4, Length (in.)2 in, and Width (in.)4
The smaller side will fit in a schedule 40 elbow (or any schedule 40 4" joint) but the fit will not be tight so it may not work for your application.
If the closet flange is IPS(iron pipe size) then this will not fit. It is made for schedule 40 to SDR 35 pipe.
Viewing 1-8 of 12
4.8 out of 5