#1 Home Improvement Retailer

Internet #100347086

Model #C480127HD112

Store SKU #190004

1-1/2 in. PVC DWV Trap Adapter

  • Adapts a PVC fitting hub to tubular trap
  • Designed for use with drain, waste and vent piping systems
  • Made from durable PVC construction
  • See More Details

Frequently Bought Together

+
+
Price:

Product Overview

Use the NIBCO 1-1/2 in. PVC DWV Trap Adapter to adapt a PVC fitting hub to a tubular trap. The durable PVC adapter is designed for use with drain, waste and vent piping systems.
  • PVC requires a primer before cementing
  • Used with drain, waste and vent piping
  • Adapts a PVC fitting hub to a tubular trap on a wall or floor
  • Spigot x slip joint connections
  • Solvent welds into a fitting hub and incorporates a slip joint for a tubular trap
  • NSF/ANSI Standard 14
  • UL Listed 94V-0
  • NSF U.P. Certified
  • 11/2 I.D. and 1.625 O.D.
  • Note: product may vary by store
  • California residents

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar PVC Fittings

current product
1-1/2 in. PVC DWV Trap Adapter
1-1/2 x 1-1/4 in. PVC DWV Trap Adapter Fitting1-1/2 in. PVC Schedule. 40 90-Degree S x S Elbow Fitting2 in. x 2 in. x 1-1/2 in. PVC DWV All Hub Sanitary Reducing Tee
BrandNIBCONIBCOCharlotte PipeNIBCO
Name1-1/2 in. PVC DWV Trap Adapter1-1/2 x 1-1/4 in. PVC DWV Trap Adapter Fitting1-1/2 in. PVC Schedule. 40 90-Degree S x S Elbow Fitting2 in. x 2 in. x 1-1/2 in. PVC DWV All Hub Sanitary Reducing Tee
Price
Ratings
(14)
(4)
(221)
(9)
Fitting 1 size1-1/2"1-1/2"1-1/2"2"
Fitting or Connector TypeAdapterAdapterElbowTee
Schedule TypeSchedule DWVSchedule DWVSchedule 40Schedule DWV
Pack Size1111
DWVDWVDWVPressureDWV
ConnectivitySolvent CementedSolvent CementedSolvent CementedSolvent Cemented
ApplicationSewageSewageNon-Potable WaterSewage
FeaturesLead FreeLead FreeUnderground UseLead Free,Side Inlet
MaterialPVCPVCPVCPVC
View ProductView ProductView ProductView Product

Specifications

Dimensions

Double Fitting Size
1-1/2" x 1-1/2"
Fitting 1 size
1-1/2"
Fitting 2 size
1-1/2"
Product Length (in.)
1.94

Details

Application
Sewage
Color Family
White
Color/Finish
White
Compatible Pipe Material
PVC
Connection 1
Spigot
Connection 2
Slip-Joint
Connectivity
Solvent Cemented
DWV
DWV
Features
Lead Free
Fitting or Connector Type
Adapter
Fitting/ Connector Collection
PVC
Material
PVC
Maximum working pressure (psi)
5
Maximum Working Temperature (F)
140
Pack Size
1
Pipe or Fitting Product Type
Fittings & Connectors
Product Weight (lb.)
0.12
Reducing Fitting
No
Returnable
90-Day
Schedule Type
Schedule DWV

Warranty / Certifications

Manufacturer Warranty
NIBCO INC. warrants each NIBCO plumbing plastic fitting (including plumbing valves) to be free from defects in materials and workmanship under normal use and service for a period of five (5) years from date of purchase.

Questions & Answers

10Questions28Answers

Will so will this slip into a 1.5" sanitee (cemented) and allow for attachment of a 1.5" drain ta...

Asked by kappa April 23, 2021
2
Answers

Thank you for your inquiry on the NIBCO 1-1/2 in. PVC DWV Trap Adapter. This adapter fitting will glue/solvent weld into a PVC DWV fitting cup/hub and allow for adapting to other drain piping seen on tubs, urinals etc. The slip joint does not fit on Sch 40 PVC piping. If you have additional questions, you can reach a NIBCO Technical Services Advisor, M-F 8am - 5pm EST, by phone at (888) 446-4226.

Does it need washer?

Asked by Isaac December 8, 2020
4
Answers

Thank you for your inquiry on the NIBCO 1-1/2 in. PVC DWV Trap Adapter. This adaptor does not use a washer. The Polyethylene slip joint nut expands when tightened onto a pipe making a seal. If you have additional questions, you can reach a NIBCO Technical Services Advisor, M-F 8am - 5pm EST, by phone at (888) 446-4226.

with is fit in 2 1/6 hole.

Asked by jerry July 11, 2020
1
Answer

Thank you for your inquiry on the NIBCO 1-1/2 in. PVC DWV Trap Adapter. No, this will not fit into a 2 1/6" hole. The outside dimension of the compression nut is 2.16" and there are also raised portions of the nut. If you have additional questions, you can reach a NIBCO Technical Services Advisor, M-F 8am - 6pm EST, by phone at (888) 446-4226.

Will this connect a 1 1/2” pvc pipe with 1 7/8 outside diameter to a 1 1/2” tail piece with 1 1/2” outside diameter?

Asked by Rob April 3, 2020
2
Answers

Thank you for your inquiry on the NIBCO 1-1/2 in. PVC DWV Trap Adapter.This fitting is compatible with schedule 40 pvc nominal size 1 1/2 in. with a OD measurement of 1.900 in. If you have additional questions, you can reach a NIBCO Technical Services Advisor, M-F 8am - 5pm EST, by phone at (888) 446-4226.

should teflon be used on the threads?

Asked by ng February 8, 2019
5
Answers

No, teflon tape is neither required nor desired. The threads on slip-joint trap adapters do NOT create the seal. Slip-joint trap adapters have a compression ring at the slip-joint. When you tighten the threaded ring on the trap adapter, the compression ring is squeezed tight against the tailpiece of your P-trap; this compression ring is what creates the watertight seal. Adding teflon tape to the threads of a trap adapter will only make it more difficult to tighten the threaded ring enough to fully compress the sealing compression ring. In other words, you're more likely to have a leak if you add teflon tape to the threads of this adapter. I'm surprised Nibco didn't explain this in their reply.

Will this connect to a 1-1/2 in. polypropylene flanged strainer tailpiece? Thanks

Asked by Bob September 4, 2018
3
Answers

I think that's its one and only reason to be a thing. You've described its Zen. Sit quietly and meditate for 5 minutes. You earned it.

can this trap be used in horizontal position

Asked by tel07 January 16, 2018
2
Answers

Yes

i have a broken 1- 1/2 pvc pipe line, which is connected to a 1-1/2 galvanized on one end, and 1-...

Asked by lotofwork17 June 19, 2017
2
Answers

This isn't the right part for that job. Perhaps you should search for a 1.5 in. Fernco coupling.

Do you need a compression gasket with this?

Asked by Mel February 21, 2016
2
Answers

No gasket used with this. Tightening the nut compresses the lip around the tailpiece. It's a drain, not a pressurized line, it'll do you just fine, as is.

This fits a 2" slip connection on one end, but where can you get 2" tubular tubing that fits into the other end? Also, other 2" tubular fittings?

Asked by Brian July 2, 2015
5
Answers

THDCustomerSupport is wrong, Chaim is wrong. AngryGordon is Correct. THD does not have a 2" to 1 1/2". This adapter fits 2" PVC on the slip side, and the other side fits NOTHING THD carries. A 1 1/2" tubular is way too small, a 1 1/2" PVC schedule 40 is way too small, a 2" PVC is way too big. It could only fit what one would believe to be 2" tubular, but that does not seem to exist. THD Associates in Pluming (the 3 I talked to that had been there for years, said they don't know any use for this item, they don't know any pipe that fits the compression side, they are stumped as to why it exist. I then went to a commercial plumbing store, and showed them this, they had no idea why it exists either.

1-1/2 in. PVC DWV Trap Adapter - page 2

Customer Reviews

  • 5
    out of 14 reviews
  • 100% recommend this product
Filter by:
Showing 1-10 of 14 reviews
My husband had to use this product, to repair the bath sink after replacing the vanity. Perfect f...
My husband had to use this product, to repair the bath sink after replacing the vanity. Perfect fit no leaks.
by Cookiebythesea
Worked perfectly. Great product!!...
Worked perfectly. Great product!!
by
by Greg
This worked awesome...
This worked awesome
by HomeDepotCustomer
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
Bery good product!...
Bery good product!
by fredford
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
5 Star Review
Rating provided by a verified purchaser
by HomeDepotCustomer
This was easy to install had no trouble with the...
This was easy to install had no trouble with the installation
by HomeDepotCustomer
Nibco trap adapter/male adapter for gluing into a fitting hub. Comes with an 1-1/2" molded slip n...
Nibco trap adapter/male adapter for gluing into a fitting hub. Comes with an 1-1/2" molded slip nut. Ideal for pedestal sinks or any exposed plumbing where the hub is close to the wall edge and you are using a decorative metal trap. If you use a much easier to install 1-1/4" trap you will need to obtain an 1-1/2" x 1-1/4" molded nut or bushing with metal nut . Also, if you use them this is good for cheap plastic bagged traps under sinks as well.
by madmax
Showing 1-10 of 14 reviews