#1 Home Improvement Retailer

Internet # 100649625

Model # 000502

$13.20
  • The toughest, highest strength epoxy we manufacture
  • Bonds steel to wood, fiberglass, aluminum, concrete and more
  • A non-drip translucent paste epoxy
  • View More Details
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details

About This Product

PC-Super Epoxy is a non drip translucent paste epoxy with unlimited uses in bonding, sealing, and as a filler for most materials. This paste epoxy was formulated to be extremely versatile, flexible, and resilient with enormous strength. Unlike our other paste epoxies PC-Super Epoxy is designed to be fast curing. PC-Super Epoxy has a viscosity similar to Vaseline making overhead and sidewall work easy without drip or sag. Stair installers just love this product for installing iron balusters. PC-Super Epoxy demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. Bonds most everything to anything. In cold or cool temperatures, place PC-Super Epoxy container near heat prior to using. PC-Super Epoxy mixes and spreads easier at 80 degree F than at 40 degree F. Any clean smooth flat surface is an excellent surface for mixing and working. A small putty knife or flexible artist spatula are great tools for mixing and applying PC-Super Epoxy. Denatured alcohol is excellent for smoothing applied PC-Super Epoxy. Also use Denatured alcohol to clean surfaces before applying. Ideal for use as adhesive: wood, metal (all types), glass, brick, block, rubber, concrete, stone, slate, fiberglass, tile, and more in any and all combinations; as sealant: oil, gas, water tanks, cellar cracks, pressure tanks, and plumbing leaks; as a filler: holes, castings, patterns, molds, voids, welds, steering wheels and much more.

Highlights

  • Bonds and repairs a wide variety of materials
  • Translucent paste epoxy
  • Cures in 3 - 4 hours at 70°F
  • Includes 2 mixing nozzles
  • Required dispensing gun is not included and is sold separately
  • Great for metal balusters to wood for stair installation
  • Cure for service in 3-4 hours at 70°F
  • Needs dispensing gun
  • Return Policy

Product Information

Internet # 100649625

Model # 000502

Additional Resources

Shop All PC Products
From the Manufacturer

Specifications

Dimensions: H 12 in, W 10.5 in, D 2.75 in

Dimensions

Product Depth (in.)

2.75 in

Product Height (in.)

12 in

Product Size (oz.)

1.69

Product Width (in.)

10.5 in

Details

Adhesion level

High

Curing time (hours)

4

Dry Color

Clear

Epoxy Accessory Type

Cartridge

Features

Drillable, Paintable, Sandable

Formula

2 Part

Glue/Epoxy Type

Concrete Epoxy, Glass Glue, Metal Epoxy

Interior/Exterior

Interior/Exterior

Package Quantity

1

Product Form

Paste

Product Weight (oz.)

1.69 oz

Recommended Surfaces

Brick, Cinderblock, Coated wood, Fiberglass, Glass, Metal, Painted wood

Returnable

90-Day

Set Time (Min.)

15

Usage Location

General, Marine Environments, Masonry, Molding, Plumbing

Warranty / Certifications

Manufacturer Warranty

Since mixing and use is beyond our control, Protective Coating Co accepts no liability other than refund or replacement due to product defect only

Questions & Answers

17Questions
caret
Q:Can you fill large cracks in Wood then drill into the material and sand then paint PC 50 ML Super Expoxy
by|Dec 1, 2023
1 Answer
Answer This Question

A:  Yes, PC-Superepoxy can be used to fill cracks in wood. It can be drilled, sanded, primed and painted.

by|Dec 4, 2023
    caret
    Q:Is it safe to use on birdbath?. Will It harm them?
    by|Jul 29, 2023
    1 Answer
    Answer This Question

    A:  PC-Superepoxy is not suitable for contact with potable water for human consumption, however, epoxies are commonly used to repair birdbaths without ill effect.

    by|Jul 31, 2023
      caret
      Q:Is this epoxy impact resistant? Also, how well will it bond metal to carbon?
      by|Dec 31, 2022
      1 Answer
      Answer This Question

      A:  PC-Superepoxy has excellent impact resistance. Adhesion to metal is good and carbon fiber composites should be tested to determine its suitability for a particular application.

      by|Jan 3, 2023
        caret
        Q:Dispensing Tool
        by|Dec 3, 2021
        1 Answer
        Answer This Question

        A:  No, the 300ml cartridge requires a smaller tool. The 22 oz. tool is capable of dispensing a 600 ml cartridge.

        by|Dec 3, 2021
          Showing 1-4 of 17

          Customer Reviews

          4.8 out of 5

          • 4.8 out of 32 reviews
          • 100% recommend this product
          Filter by:
          Showing 1-10 of 32 reviews
          Used it to install and firmly set iron balusters in...
          Used it to install and firmly set iron balusters in a stairway. Was a clean install without any drip. Once fully cured the balusters are immovable. Highly recommend this product
          by
          • Verified Purchase
          Worked great when installing iron balusters. Now I've found that I use it quite a bit on other pr...
          Worked great when installing iron balusters. Now I've found that I use it quite a bit on other projects. Ten times better than the mess of using construction adhesive. Stuff comes out the consistency of Vaseline - so it holds it's form and does not sag. Can be very precise dispensing thru the small hole in the mixing tube. The cartridge is also reusable.......just need to take off the long mixing tube and put the little cap back on the cartridge. Just be aware that the mixing tube needs replaced every time - as the mixed epoxy hardens inside. Also be aware that the epoxy dries white. PC Products has another version of this cartridge that dries clear - but I have not used it yet. Some people have given the cartridge a bad rating since you need to buy the separate gun to dispense the epoxy.......all they need to do is read the product description where is says you need the gun!
          by
            • Recommended
            1 found this review helpful
            Easy to work, paste texture stays in place while drying....
            Easy to work, paste texture stays in place while drying. I would prefer "clear" when dry, but the translucent was fine as expected. I mixed some fine strained teak saw dust in with the product and attained a suitable small patch on the repair I did. I would purchase this product again.
            by
            • Verified Purchase
            This works great. Wish it stayed flexible just a little...
            This works great. Wish it stayed flexible just a little longer.than 15 minutes.
            by
            • Verified Purchase
            Rating provided by a verified purchaser...
            Rating provided by a verified purchaser
            by
            • Verified Purchase
            great epoxy paste that stayed in place!
            This product worked extremely well for setting iron bollards in red oak wood. I particularly liked the consistency of the product, which kept it in place while working under the hand rail.
            by
            • Verified Purchase
            • Recommended
            by
            • Verified Purchase
            It locks in place and is fast drying. I love...
            It locks in place and is fast drying. I love that it stays put and does not run while doing projects.
            by
            • Verified Purchase
            Rating provided by a verified purchaser...
            Rating provided by a verified purchaser
            by
            • Verified Purchase
            Great product for iron balusters
            I had some concerns about using epoxy as I read some reviews where people had bad experience with it but in my case this product was great. It comes out as some sort of paste so it doesn't drip and once you wait the 3-4 hours as indicated in the instructions those balusters will stay in place forever. My recommendation is to go slow and do one baluster at a time. You don't need to put a lot of the epoxy per baluster and by doing so you should be able to use one cartridge for 15-20 balusters.
            by
              • Recommended
              1 found this review helpful
              Showing 1-10 of 32 reviews