Internet #100649627

Model # 128770

0054983128770

PC-7 Paste Epoxy 8 lb.

$ 65 07
Loading Options
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Frequently Bought Together

Product Overview

PC-7 is the tough job epoxy. This paste epoxy was formulated for maximum bonding power. When mixed, components A (grey) and B (black) reacts to form a bond of tremendous strength. PC-7 formulation provides extended working time, for large and critical jobs, which allow the user to reposition work or make changes. High "wet grab" or tack of PC-7 Paste Epoxy makes overhead and sidewall work easy without drip or sag. PC-7 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. Approximately equal amounts of A and B by volume; variations of either component as high as 20 percent will not affect the bond strength. When desirable, one part of A to two parts B may be used to increase elasticity (expansion joints, etc.). In cold or cool temperatures, place PC-7 container near heat prior to using. PC-7 mixes and spreads easier at 80 degree F than at 40 degree F. Any clean smooth flat surface is an excellent surface for mixing and working. A small putty knife or flexible artist spatula are great tools for mixing and applying PC-7. Use with as adhesive: wood, metal (all types), glass, brick, block, rubber, concrete, stone, slate, fiberglass, tile, and more in any and all combinations; as sealant: oil, gas, water tanks, cellar cracks, pressure tanks, and plumbing leaks; as a filler: holes, castings, patterns, molds, voids, welds, steering wheels and much more.
  • Two-part multipurpose epoxy adhesive paste works as a bonding agent, sealant, and filler for a range of indoor and outdoor applications
  • Bonds many materials, including fiberglass, wood, concrete, many metals, brick, glass, ceramic, and rubber
  • Seals oil, gas, and water tank leaks, as well as plumbing and masonry cracks
  • Fills holes, castings, and molds
  • Application temperature range is 35 to 115 degrees F
  • Service temperature range is -20 to +200 degrees F
  • Formulated for maximum bonding power
  • Work time (70 degree F): 60 minutes
  • Tack free cure time: 160 minutes
  • Cure for service: 24 hours
  • Maximum cure: 7 day

Product Overview

Model #: 128770
Internet #: 100649627

PC-7 is the tough job epoxy. This paste epoxy was formulated for maximum bonding power. When mixed, components A (grey) and B (black) reacts to form a bond of tremendous strength. PC-7 formulation provides extended working time, for large and critical jobs, which allow the user to reposition work or make changes. High "wet grab" or tack of PC-7 Paste Epoxy makes overhead and sidewall work easy without drip or sag. PC-7 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. Approximately equal amounts of A and B by volume; variations of either component as high as 20 percent will not affect the bond strength. When desirable, one part of A to two parts B may be used to increase elasticity (expansion joints, etc.). In cold or cool temperatures, place PC-7 container near heat prior to using. PC-7 mixes and spreads easier at 80 degree F than at 40 degree F. Any clean smooth flat surface is an excellent surface for mixing and working. A small putty knife or flexible artist spatula are great tools for mixing and applying PC-7. Use with as adhesive: wood, metal (all types), glass, brick, block, rubber, concrete, stone, slate, fiberglass, tile, and more in any and all combinations; as sealant: oil, gas, water tanks, cellar cracks, pressure tanks, and plumbing leaks; as a filler: holes, castings, patterns, molds, voids, welds, steering wheels and much more.

  • Two-part multipurpose epoxy adhesive paste works as a bonding agent, sealant, and filler for a range of indoor and outdoor applications
  • Bonds many materials, including fiberglass, wood, concrete, many metals, brick, glass, ceramic, and rubber
  • Seals oil, gas, and water tank leaks, as well as plumbing and masonry cracks
  • Fills holes, castings, and molds
  • Application temperature range is 35 to 115 degrees F
  • Service temperature range is -20 to +200 degrees F
  • Formulated for maximum bonding power
  • Work time (70 degree F): 60 minutes
  • Tack free cure time: 160 minutes
  • Cure for service: 24 hours
  • Maximum cure: 7 day

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Key Features

Product Overview
Key Features
PC-7 is the tough job epoxy. This paste epoxy was formulated for maximum bonding power. When mixed, components A (grey) and B (black) reacts to form a bond of tremendous strength. PC-7 formulation provides extended working time, for large and critical jobs, which allow the user to reposition work or make changes. High "wet grab" or tack of PC-7 Paste Epoxy makes overhead and sidewall work easy without drip or sag. PC-7 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. Approximately equal amounts of A and B by volume; variations of either component as high as 20 percent will not affect the bond strength. When desirable, one part of A to two parts B may be used to increase elasticity (expansion joints, etc.). In cold or cool temperatures, place PC-7 container near heat prior to using. PC-7 mixes and spreads easier at 80 degree F than at 40 degree F. Any clean smooth flat surface is an excellent surface for mixing and working. A small putty knife or flexible artist spatula are great tools for mixing and applying PC-7. Use with as adhesive: wood, metal (all types), glass, brick, block, rubber, concrete, stone, slate, fiberglass, tile, and more in any and all combinations; as sealant: oil, gas, water tanks, cellar cracks, pressure tanks, and plumbing leaks; as a filler: holes, castings, patterns, molds, voids, welds, steering wheels and much more.
  • Two-part multipurpose epoxy adhesive paste works as a bonding agent, sealant, and filler for a range of indoor and outdoor applications
  • Bonds many materials, including fiberglass, wood, concrete, many metals, brick, glass, ceramic, and rubber
  • Seals oil, gas, and water tank leaks, as well as plumbing and masonry cracks
  • Fills holes, castings, and molds
  • Application temperature range is 35 to 115 degrees F
  • Service temperature range is -20 to +200 degrees F
  • Formulated for maximum bonding power
  • Work time (70 degree F): 60 minutes
  • Tack free cure time: 160 minutes
  • Cure for service: 24 hours
  • Maximum cure: 7 day

Product Overview

Model #: 128770
Internet #: 100649627

PC-7 is the tough job epoxy. This paste epoxy was formulated for maximum bonding power. When mixed, components A (grey) and B (black) reacts to form a bond of tremendous strength. PC-7 formulation provides extended working time, for large and critical jobs, which allow the user to reposition work or make changes. High "wet grab" or tack of PC-7 Paste Epoxy makes overhead and sidewall work easy without drip or sag. PC-7 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. Approximately equal amounts of A and B by volume; variations of either component as high as 20 percent will not affect the bond strength. When desirable, one part of A to two parts B may be used to increase elasticity (expansion joints, etc.). In cold or cool temperatures, place PC-7 container near heat prior to using. PC-7 mixes and spreads easier at 80 degree F than at 40 degree F. Any clean smooth flat surface is an excellent surface for mixing and working. A small putty knife or flexible artist spatula are great tools for mixing and applying PC-7. Use with as adhesive: wood, metal (all types), glass, brick, block, rubber, concrete, stone, slate, fiberglass, tile, and more in any and all combinations; as sealant: oil, gas, water tanks, cellar cracks, pressure tanks, and plumbing leaks; as a filler: holes, castings, patterns, molds, voids, welds, steering wheels and much more.

  • Two-part multipurpose epoxy adhesive paste works as a bonding agent, sealant, and filler for a range of indoor and outdoor applications
  • Bonds many materials, including fiberglass, wood, concrete, many metals, brick, glass, ceramic, and rubber
  • Seals oil, gas, and water tank leaks, as well as plumbing and masonry cracks
  • Fills holes, castings, and molds
  • Application temperature range is 35 to 115 degrees F
  • Service temperature range is -20 to +200 degrees F
  • Formulated for maximum bonding power
  • Work time (70 degree F): 60 minutes
  • Tack free cure time: 160 minutes
  • Cure for service: 24 hours
  • Maximum cure: 7 day

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Product Depth (in.)
9
Product Height (in.)
6.5
Product Size (oz.)
96
Product Width (in.)
12 in

Details

Adhesion level
High
Adhesive Product Type
Glue/Epoxy
Curing time (hours)
12
Features
Drillable,Moisture Resistant,Sandable,Solvent Resistant,UV/sunlight Resistant
Flammable
No
Glue/Epoxy Type
Plastic Epoxy
Indoor/Outdoor
Indoor/Outdoor
Package Quantity
1
Product Weight (oz.)
96 oz
Recommended Surfaces
Brick,Ceramic,Concrete,General Purpose,Glass,Metal,Stone,Tile
Returnable
90-Day
Set Time (Min.)
60

Warranty / Certifications

Manufacturer Warranty
Since mixing and use is beyond our control, Protective Coating Co accepts no liability other than refund or replacement due to product defect only

Specifications

Dimensions

Product Depth (in.)
9
Product Height (in.)
6.5
Product Size (oz.)
96
Product Width (in.)
12 in

Details

Adhesion level
High
Adhesive Product Type
Glue/Epoxy
Curing time (hours)
12
Features
Drillable,Moisture Resistant,Sandable,Solvent Resistant,UV/sunlight Resistant
Flammable
No
Glue/Epoxy Type
Plastic Epoxy
Indoor/Outdoor
Indoor/Outdoor
Package Quantity
1
Product Weight (oz.)
96 oz
Recommended Surfaces
Brick,Ceramic,Concrete,General Purpose,Glass,Metal,Stone,Tile
Returnable
90-Day
Set Time (Min.)
60

Warranty / Certifications

Manufacturer Warranty
Since mixing and use is beyond our control, Protective Coating Co accepts no liability other than refund or replacement due to product defect only

Questions & Answers

Can this be used on a new Corian counter to for under mounted sinks?

Can this be used on a new Corian counter to for under mounted sinks?
Asked by: RJB
Yes, this will bind to the sink material and the counter.
Answered by: CommunityAnswer
Date published: 2018-01-26

Can this product be poured from the can or does it require scouping? What maximum thickness will ...

Can this product be poured from the can or does it require scouping? What maximum thickness will stand on a horizontal easily? Can I mix with play sand to increase thickness?
Asked by: Andy
PC-7 is very thick, like bubble gum. It can not be poured.
Answered by: FIX-YOUR-THINGS
Date published: 2018-09-03

Can I use this product to bond 1x3 pt lumber to concrete floor?

Can I use this product to bond 1x3 pt lumber to concrete floor?
Asked by: Help
PC-7 will bond pressure treated lumber and concrete.
Answered by: Chuck
Date published: 2017-12-27

What color is the product when dry? Is the surface slippery when wet and if so can grit be added to increase traction?

Asked by: Sam
It dries to a medium to dark gray color but can be painted. I would not consider it slippery, but you could sprinkle sand or grit on top of the epoxy after you have spread it out.
Answered by: GFactor
Date published: 2018-04-26
  • y_2019, m_10, d_15, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_, sid_100649627, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 31ms
  • QUESTIONS, PRODUCT

Customer Reviews

PC Products PC-7 Paste Epoxy 8 lb. is rated 4.0 out of 5 by 1.
Rated 4 out of 5 by from Good Stuff! I recently renovated a 30 year old pool that had a fiberglass interior. When we removed the old fiberglass, the aluminum sandwich wall panels and concrete bottom had a lot of long term water damage. PC-7 was the ticket. I used 32 pounds to patch the wall panels and the bottom. It takes a little practice to learn how to work with it. It is rock solid once it hardens. I advise making sure you don't leave your self a lot of sanding. It's easier to work with while it's stlli workable Cut a small piece of plywood to mix the two components. All in all, a great product.. Way better than bondo, and it doesn't set up so fast.
Date published: 2012-07-11
  • y_2019, m_10, d_14, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_, sid_100649627, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 8ms
  • REVIEWS, PRODUCT