#1 Home Improvement Retailer

Internet # 203565728

Model # 070529

PC-Concrete 2.8 oz. Cartridge Anchoring Epoxy Kit

$39.78
Apply Now
Pay $14.78 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Nothing stronger for anchoring applications
  • The epoxy chosen to repair cracks in warehouse and factory floors
  • Non-shrinking formula
  • View More Details
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy

Product Details

About This Product

Anchoring Epoxy Kit includes static mixing nozzles and dispensing gun. 2.8 oz. cartridge. Works on wet or dry surfaces.

Highlights

  • PC-Concrete cures on wet, dry and underwater surfaces
  • Epoxy is three times stronger than concrete
  • Epoxy mixes through the included nozzles
  • Use to Bond-seal-fill-anchor into solid or hollow block
  • Cured product is pick proof and will not crack or shrink
  • Use to fill cracks or to install anchor bolts and re-bar
  • Kit includes gray epoxy adhesive paste, dispensing gun, and mixing nozzles
  • Dispensing gun is made from steel for strength and includes a thumb-release trigger for controlled application
  • Color of dispensing gun may vary
  • Return Policy

Product Information

Internet # 203565728

Model # 070529

Additional Resources

Shop All PC Products
From the Manufacturer

Specifications

Product Size (oz.): 24 oz

Dimensions

Product Size (oz.)

24 oz

Details

Adhesion level

High

Application

Epoxy Kit

Color/Finish

Brown

Curing time (hours)

4

Dry Color

Brown

Dry to Touch (min.)

30 min

Formula

2 Part

Interior/Exterior

Interior/Exterior

Package Quantity

1

Paint/Stain Clean Up

Mineral Spirits

Paint/Stain Features

Moisture Resistant

Product Form

Putty

Recommended Surfaces

Brick, Cinderblock

Returnable

90-Day

Set Time (Min.)

20

Usage Location

General, Marine Environments, Masonry

Warranty / Certifications

Manufacturer Warranty

refund or replacement due to product defect only

Questions & Answers

127Questions
caret
Q:Can this product use for inground pool leak around drainage
by|Jul 15, 2024
1 Answer
Answer This Question

A:  PC-Concrete can be used in pools to seal leaks.

by|Jul 16, 2024
    caret
    Q:Can this Epoxy be used to anchor a lightweight resin water fountain to a concrete paver?
    by|Jul 14, 2024
    1 Answer
    Answer This Question

    A:  Adhesion to plastic resin may not be strong enough to hold the waterfountain.

    by|Jul 16, 2024
      caret
      Q:Will water penetrate this product once it cures if used to fill a small (dry at application) crack in a concrete floor?
      by|May 13, 2024
      2 Answers
      Answer This Question

      A:  PC-Concrete is completely waterproof and water can not penetrate it.

      by|May 14, 2024

        A:  PC-Concrete is waterproof. It will not be affected by water.

        by|May 16, 2024
          caret
          Q:Can this product repair a old marble headstone that has broken in half?
          by|Mar 8, 2024
          1 Answer
          Answer This Question

          A:  Yes, PC-Concrete can be used to repair a broken marble headstone. PC-Concrete is gray color. For a less visible repair consider PC-11 epoxy paste which is off-white color.

          by|Mar 8, 2024
            Showing 1-4 of 127

            Customer Reviews

            4.5 out of 5

            • 4.5 out of 161 reviews
            • 92% recommend this product
            Filter by:
            Showing 1-10 of 161 reviews
            Filled gaping crack in concrete wall
            Had 1 inch wide and 2.5 inch gaping crack in front porch 2ft wall that was built in 1910. Filled bottom of crack with heavy duty concrete, dried, then 1 to 1.5 inches of PC product, dried, then topped off with concrete. Time will be the judge but, looks great and i have confidence as i have used PC products for years.
            by
            • Verified Purchase
            • Recommended
            Plenty of worktime great sealer
            I had plenty of time to work on getting the product into cracks. However it was cool outside where i used it. And if exposed to sunlight it warms quickly and accelerated setting. When it is cool in shade, it takes much longer and can tend to sag with large verticle cracks. It slowly sets and eventually stays in place for larger cracks of 1/2" or more. A good practice is to use duct tape to mask off the area before applying to prevent getting it on a much wider area than the crack. Peel off tape before complete hardenjng. Color is bule gray and doesnt match concrete so prepare to and a final topping of sand if you want to approximate your color.
            by
            • Verified Purchase
            • Recommended
            1 found this review helpful
            I was having an issue with my garage stairs leading into my basement leak small amount of water. ...
            I was having an issue with my garage stairs leading into my basement leak small amount of water. I was recommended to use this from my local handyman. I applied the Epoxy around the edges and seams of the concrete steps and let dry. The Epoxy was surprisingly easy to apply with a typical caulking gun and not messy during cleanup. I would highly recommend to anyone as it bonds well and have not seen any leaking since!
            by
            This review is from PC Concrete 9 oz. Epoxy
            • Verified Purchase
            • Recommended
            3 found this review helpful
            Very Good Product
            I used this product to repair two cracks on the inside of my basement wall. During extended periods of rain, the cracks would leak water. Before applying, I used a chisel to widen the cracks to 1/4" and cleaned the cracks with a wire brush and vacuum. After applying, no more leaks. I will also complete this process on the exterior of the basement wall.
            by
            This review is from PC Concrete 9 oz. Epoxy
            • DIY
            • Verified Purchase
            • Recommended
            8 found this review helpful
            • Verified Purchase
            by
            This review is from PC Concrete 9 oz. Epoxy
            • Verified Purchase
            by
            • Verified Purchase
            Product was easy to apply, and shows exceptional strength. Be aware that finish is glossy.
            by
            This review is from PC Concrete 9 oz. Epoxy
            • Verified Purchase
            by
            This review is from PC Concrete 9 oz. Epoxy
            • Verified Purchase
            Watch air temperature, cures quick in Florida heat
            Good for anchor bolts, but dont use the mixing nozzle as it tends to clog up and shut down any flow. Instead, just squeeze out as much as needed to coat one bolt and partially fill hole, one bolt at a time. Mix well with small plastic putty knife, push some in hole and then roll anchor bolt in the mixed epoxy and insert. Keep tube out of sun, and place it on a tray full of ice between bolts so that cure time is not too fast.
            by
              • Recommended
              Showing 1-10 of 161 reviews