![]() | ![]() | ![]() | ![]() | |
Brand | PRO-SERIES | MetalTech | MetalTech | MetalTech |
Name | 6 ft. x 6 ft. x 2.4 ft. Multi-Use Drywall Baker Scaffolding with 1000 lb. Capacity | 39 in. High Extension for Jobsite Series 6 ft. Baker | Job Site Series 6 ft. x 6 ft. x 2-1/2 ft. Baker Scaffold, 1000 lbs. Load Capacity | Safeclimb 6 ft. x 6 ft. x 2-1/2 ft. Baker Style Scaffold 1100 lbs. Capacity |
Price | $18900 $219.00 Save $30.00 (14%) | $20599 | $22672 | $22800 |
Ratings | (1596) | (21) | (77) | (686) |
Assembled Height (ft.) | 6.2 | 6.22 | 6 | |
Scaffolding Style | Baker | Baker | Baker | Baker |
Scaffold Product Type | Rolling Scaffolds | Scaffold Extensions | Rolling Scaffolds | Rolling Scaffolds |
Maximum Height to Platform (ft.) | 6 | 6.08 | 6.1 | |
Base Width (in.) | 72 | 29.75 | 73.75 | |
Features | Adjustable,Casters,Stackable,Weather Resistant | Stackable | Units Combine or Connect,Weather Resistant | Adjustable,Casters,Foldable,Hardware Included,Weather Resistant |
Assembled Width (ft.) | 6.1 | 6.22 | 6 | |
Number of platforms included | 1 | 1 | 1 | |
Assembled Depth (ft.) | 2.4 | 2.5 | 2.5 | |
View Product | View Product | View Product | View Product |
![]() | ![]() | ![]() | ![]() | |
Brand | PRO-SERIES | MetalTech | MetalTech | MetalTech |
Name | 6 ft. x 6 ft. x 2.4 ft. Multi-Use Drywall Baker Scaffolding with 1000 lb. Capacity | 39 in. High Extension for Jobsite Series 6 ft. Baker | Job Site Series 6 ft. x 6 ft. x 2-1/2 ft. Baker Scaffold, 1000 lbs. Load Capacity | Safeclimb 6 ft. x 6 ft. x 2-1/2 ft. Baker Style Scaffold 1100 lbs. Capacity |
Price | $18900 $219.00 Save $30.00 (14%) | $20599 | $22672 | $22800 |
Ratings | (1596) | (21) | (77) | (686) |
Assembled Height (ft.) | ||||
Scaffolding Style | ||||
Scaffold Product Type | ||||
Maximum Height to Platform (ft.) | ||||
Base Width (in.) | ||||
Features | ||||
Assembled Width (ft.) | ||||
Number of platforms included | ||||
Assembled Depth (ft.) | ||||
View Product | View Product | View Product | View Product |
Negative, negative, I repeat negative. It would be possible to do but extremely dangerous. I just bought two which I stack to obtain a 12 foot platform and I also bought the outriggers (must have!!). When you are standing on top of 2 units stacked together, any small movement you make is magnified by this staging - you move a little, the unit moves A LOT! Bear in mind that this staging unlike the kind used in construction lacks CROSS-BRACING, and without it it tends to want to twist and to rack. I am glad I bought it and am happy with it, and it will allow me to complete my projects. It is easy to assemble and to change the height of the platforms, and easy to roll around. Should have bought the package that has the guard and would advise that because standing on this shaky platform at 12 feet is no bargain. I see they sell one that is 3 units stacked. That is irresponsible.
You can take it apart. Not very hard to put together.
I am 235 lbs 56 yrs old and have used it for years be carful but no problem
yes!
Yes, just remove a clip and pull out the pin. Easy
Adding a third level will make this product unstable in my view unless secured from above in some way and also properly.
Yes. Be sure to remove the platform before you adjust the height. Adjustment holes are placed on 2-inch centers.
Yes
You may adjust the platform on the GSSI.
At max height, your footing height is 12 ft. Average overhead reach for a 5'8" male worker is about 7' 6", a 6' 2" worker is about 8' 3". etc. etc. So your tallest workers will have a max reach over 20'. But that is fingertip reach. I would say that realistically, you should expect a max "working" reach of about 19' for an average size worker. But that's still pretty good. Any higher and you would probably want a mechanical lift anyway.