$1398
- Fasten into concrete, hollow or grout-filled block and brick
- Can be used to install machinery and for supportive structure
- Contractor grade and building code approved
- View More Details
How to Get It
Frequently Bought Together
Price:
$1398
Product Overview
Red Head 3/8 in. x 1-7/8 in. Zinc-Plated Steel Hex-Nut-Head Sleeve Anchors (25-Pack) are designed for fastening applications in porous concrete, hollow or grout-filled block and brick. Use to install electrical boxes, shelf ledgers and conduit and door frames. Red Head Sleeve Anchors are contractor grade and building code approved.
- Designed for fastening into porous concrete, hollow or grout-filled block and brick
- Ideal for hand rails, window frames, partitions, cabinets, shelves and pipe supports
- Anchor diameter equals hole diameter
- Zinc plated carbon steel
- Provides full 360° hole contact over large area and reduces concrete stress
- Heavy-loading capacity
- Preassembled for faster, easier installations
- No pre-spotting of holes necessary
- Includes pre-assembled nut and washer
Compare Similar Masonry Anchors
|  |  |  | |
| Brand | Red Head | Tapcon | Red Head | Red Head |
| Name | 3/8 in. x 1-7/8 in. Hex Sleeve Anchor (25-Pack) | 3/16 in. x 1-1/4 in. Hex-Washer-Head Concrete Anchors (75-Pack) | 1/2 in. x 4 in. Steel Hex-Head Sleeve Anchors (25-Pack) | 1/2 in. x 3 in. Steel Hex-Nut-Head Sleeve Anchors (25-Pack) |
| Price | $1398 | $1652 | $2821 | $2878 |
| Ratings | (623) | (764) | (623) | (623) |
| Anchor Diameter (in.) | 3/8" | 3/16" | 1/2" | 1/2" |
| Fastener Length (in.) | 1.875 | 1.25 | 4 | 3 |
| Fastening Base Material | Brick,Cinder Block,Concrete | Brick,Cinder Block,Concrete | Brick,Cinder Block,Concrete | Brick,Cinder Block,Concrete |
| Fastener Type | Sleeve Anchors | Concrete Screws | Sleeve Anchors | Sleeve Anchors |
| Fastener/Connector Material | Steel | Steel | Steel | Steel |
| Interior/Exterior | Interior | Exterior,Interior | Interior | Interior |
| Anchor Length (in.) | 1.875 | 1.25 | 4 | 3 |
| Package Quantity | 25 | 75 | 25 | 25 |
| View Product | View Product | View Product | View Product |
Specifications
Dimensions
| Anchor Diameter (in.) | 3/8" | Anchor Length (in.) | 1.875 |
|---|---|---|---|
| Fastener Length (in.) | 1.875 | Required Drill Hole Size (in.) | 0.375 |
Details
| Color Family | Metallic | Fastener Head Style | Hex |
|---|---|---|---|
| Fastener Plating | Zinc | Fastener Type | Sleeve Anchors |
| Fastener/Connector Material | Steel | Fastening Base Material | Brick,Cinder Block,Concrete |
| Features | Coated | Finish | Zinc plated carbon steel |
| Finish Family | Zinc | Included | No Additional Items Included |
| Interior/Exterior | Interior | Maximum Weight Capacity (lb.) | 0 |
| Measurement Standard | SAE | Package Quantity | 25 |
| Product Weight (lb.) | .077 lb | Returnable | 90-Day |
Warranty / Certifications
| Manufacturer Warranty | ITW Brands warrants that this product is free from defects in material and workmanship. ITW Brands' sole liability for any breach of this warranty shall be to replace this product or refund the purchase price. |
|---|
Questions & Answers
Typical questions asked about products:
- Is the product durable?
- Is the product easy to use?
- What are the dimensions of the product?
Customer Reviews
May 28, 2022
Shears off too easily
Pay attention to the TORQUE, these (esp. the thinner/shorter ones, e.g. 5/16" x 1-1/2") shear off much too easily. LUBRICATE the threads before tightening if installing in hard concrete; back off after each turn when you feel resistance.
If the threaded bolt DOES shear off, hammer the bolt part back into the hole just enough to expose the inside of the metal jacket; grab onto the neck of the jacket w/ a pair of needle-nosed pliers and wrestle it out, then also pull the threaded bolt out.
by
Jul 9, 2021
Idea for proper fasten vertical patio supports to cement slab.
Idea for proper fasten vertical patio supports to cement slab.
by
Mar 12, 2021
Good anchor but ... Drill end strips easily.
These bits are nice and easy to use but the end you screw in is made of super soft metal. Strips super easy. Difficult to keep a bit in.
by
Dec 18, 2020
Easy to use, works well for proper applications.
Just be sure...
Easy to use, works well for proper applications.
Just be sure to drill the holes to the proper depth, because if very difficult to remove the anchor bolt after hammering it in.
by
Nov 2, 2020
Solid sleeve anchors that provide a good hold.
I installed two of these in cinder block wall (in the area of the block sidewalls and mortar and they held well. I drilled a 1/2" diameter hole and the fit was a bit tight, I would recommend a 9/16" bit, especially if you are screwing the bolt out more than an inch. I used these to secure an old 2x4 shelf bracket to the wall and they worked great.
by
Jun 30, 2020
not good for taller posts
Used it for installing a shade sail on my backyard and it was a nightmare.
1- First of all, this product is hard to install for a novice home project guy like me. The hole should be perfect. If it's too tight, then you can't penetrate it fully and guess what? It's almost impossible (at least with the tools I had) to pull it out. So, you have to make another hole and use another anchor.
2- After having several failures, I made the hole a bit looser - which looks perfect. But after installation, with a couple of relatively heavy wind, it got out of the hole and the post (wooden post about 8') became very unstable.
3- even it was my fault, the instruction was extremely bad. I don't think even the picture is similar to the real product.
Not happy at all.
by
Apr 15, 2020
Wored perfectly to mount home gym rig.
Wored perfectly to mount home gym rig.
by
Apr 1, 2020
Pro Color Painting out of Jacksonville, Florida uses these all...
Pro Color Painting out of Jacksonville, Florida uses these all the time. The are fast and efficient fasteners for everyday use. We use them when installing these benches in several shopping centers around the Jacksonville area.
by
Oct 28, 2019
The instruction on back say to hit head with hammer... do NOT do this this, the you ruin the thre...
The instruction on back say to hit head with hammer... do NOT do this this, the you ruin the threads and you will be waste all day thinking abou how to remove the nut and anchor.
USE a piece of scrap wood opposite of a hammer when inserting it.
by
Oct 8, 2019
Did what they were supposed to, and was so simple, that's makes for a great project!
Did what they were supposed to, and was so simple, that's makes for a great project!
by
Related Products
Explore More on homedepot.com
Bath
Kitchen
Outdoor Garden
Safety Equipment & Workwear
