$8.12
- Fastest way to cap PEX, copper, CPVC, PE-RT or HDPE Pipe
- Requires no special tools to install on hot or cold water lines
- Works on wet lines, rotatable after installation & removable
Product Details
Specifications
Questions & Answers
33Questions
Q:This work to catch this pipe. Three-quarter inch outside diameter that half inch inside diameter
by|Jan 1, 2023
1 Answer
Q:Can the end cap be used for outdoor use. Broken spicket outside. Just want to cap off
by|Dec 28, 2022
2 Answers
Q:If I have my hot & cold copper pipes capped with this SharkBite fitting. Can I then remove them with the tool and replace them with SharkBite couplers? Is there any marring left by the bites that I have to deal with? Thanks.
by|Dec 13, 2022
2 Answers
Q:How do you remove these and are the reusable?
by|Nov 2, 2022
1 Answer
Showing 1-4 of 33
Jan 5, 2023
Sold on SharkBite
I have used SharkBite products on 4 or 5 different plumbing issues and all have held well. I've installed end stops underneath my house and simple cut-offs for an outside faucet (all normal 1/2 copper water pipe). No problems at all. Will continue to use them wherever I can. I'm sold on the product. As most vids and instructions tell you, cut your pipe square, keep it clean, push on the fitting while keeping it straight (not at an angle); done.
by
Jul 12, 2022
Excellent product
Very easy to use and highly effective. No leaks whatsoever. Simply measure, smooth cut on the pipe, and cap. That's it!
by
Mar 31, 2020
After much reading and videos of seeing and not believing how easy this would be to install, I in...
After much reading and videos of seeing and not believing how easy this would be to install, I installed 3 quicker than it took to cut the 1/2 inch copper pipe. I just cleaned the pipe with Emory cloth prior to cutting off old angle stops first then deburr the edges a little and pushed the fittings on. I used 3 caps as of now and they are a life saver knowing they are easily removable and reusable. This is helping me a lot as I demo my bathroom and knowing 2 fittings will be re routed anyways. I just needed to stop the water flow.
by
Mar 3, 2020
Exactly what was needed ...
Exactly what was needed
by
Mar 1, 2020
When we added an extension washroom, the guys left the old washer hookup with valve connected. O...
When we added an extension washroom, the guys left the old washer hookup with valve connected. Of course eventually, the valve would fail which it did. Fortunately I caught it early. My first thought was to cut out the valve stub-outs, and use the Sharkbite end stop to cap off the copper pipe. But then I discovered how "easy" it is just replace the valve. Since space limitations would make it somewhat difficult to cut out the old valve stub-outs, I decided to try a new valve. Got the replacement valve and it didn't fit. The on-center was correct, but I couldn't even get the valve on the stub-outs. I had 2 of the Sharbite end stops so the decision was made. I cut out the valve stub-outs with a multi-tool, yes not recommended. There was no way to get a pipe cutter in there without cutting the box and I didn't want to do that. After cutting I then filed and sand papered to make sure the end of the copper pipe was smooth. Even getting the end stop on wasn't easy due to the limited space and other constraints. Once I got it on, turned on the water...No leaks! Awesome! Checked it a couple of days later and all is good. This is a definite recommend!
by
Jun 22, 2019
I'm a plumber now!! Well at least I was able to seal off a leaking copper pipe I found in my bath...
I'm a plumber now!! Well at least I was able to seal off a leaking copper pipe I found in my bathroom remodeling. 5 minutes tops including water shutoff - I also bought and used the deburring tool (Home Depot internet item #100638148).
by
Dec 11, 2018
Easy to assemble. Took less than 5 minutes to attach to the pipe.
Easy to assemble. Took less than 5 minutes to attach to the pipe.
by
Aug 8, 2018
Instant fix. Tape it on and you are done.
Instant fix. Tape it on and you are done.
by
Jun 19, 2018
Magic. Did the job. But too expensive
Magic. Did the job. But too expensive
by
Jun 5, 2018
Was hesitant to use over sweat on, but gave it a try. Was super easy to install, and shows no sig...
Was hesitant to use over sweat on, but gave it a try. Was super easy to install, and shows no sign of any leaking.
by
Frequently Bought Together
Price:
$812
Compare Similar Brass Fittings
|  | |  | |
| Brand | SharkBite | SharkBite | SharkBite | SharkBite |
| Name | 1/2 in. Push-to-Connect Brass End Stop Fitting | 1/2 in. Push-to-Connect x MIP Brass Adapter Fitting | 1/2 in. Push-to-Connect Brass 90-Degree Elbow Fitting | 3/4 in. Push-to-Connect Brass 90-Degree Elbow Fitting |
| Price | $837 | $837 | $947 | $1197 |
| Ratings | (1232) | (854) | (1879) | (1870) |
| Fitting 1 size | 1/2" | 1/2" | 1/2" | 3/4" |
| Fitting or Connector Type | Cap | Adapter | Elbow | Elbow |
| Connectivity | Push Fit | Push Fit | Push Fit | Push Fit |
| Application | Potable Water | Potable Water | Potable Water | Potable Water |
| Features | Removable | Removable | Removable | Removable |
| Pack Size | 1 | 1 | 1 | 1 |
| THD SO SKU | 1000316159 | 1000317677 | 1000317673 | 1000067598 |
| View Product | View Product | View Product | View Product |
Related Searches
Related Products
Explore More on homedepot.com
Bath
Doors & Windows
Lighting
Outdoor Living
Safety Equipment & Workwear
