#1 Home Improvement Retailer

Internet #205475241

Model #24735LF

Store SKU #1001008643

1/2 in. Push-to-Connect Brass Slip Ball Valve

$2291
  • Easiest way to install a new or replacement shut-off ball valve
  • Requires no special tools to install on hot or cold-water lines
  • Works on wet lines, rotatable after installation, and removable
  • View More Details
Store
0 in stock
Text to Me
How to Get It

Frequently Bought Together

+
+
Price:
$2291

Product Overview

SharkBite Push-to-connect ball valve is the easiest way to install a new or replacement shut-off ball valve. The single lever quarter-turn control allows for easy operation and the valve is perfect for potable water and hydronic applications where a shut-off is needed. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the valve after installation. Removing the valve is just as fast using a disconnect tool so the valve can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, a chlorine-resistant O-ring for a long-lasting seal, and backed by a 25-year warranty.
  • Compatible with PEX, copper, CPVC, PE-RT, and HDPE pipe
  • Push-to-connect fittings are ideal for installation in tight spaces
  • Rated to 200 degrees Fahrenheit and 200 PSI
  • Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
  • Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
  • Low-lead DZR corrosion-resistant brass body
  • Code approved, IAPMO listed, for details see Specifications
  • 25-Year warranty when used with PEX, copper, CPVC & PE-RT pipe
  • 5-Year warranty when used with SDR-9 HDPE pipe
  • Meets all UPC, IPC and cUPC requirements
  • Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
  • Rated to 200 degree F and 200 psi
  • Adapts to pipe using push-fit connection
  • 1/2 in. pipe insertion depth - 15/16 in.
  • Shop all SharkBite Fittings
  • California residents

Additional Resources

From the Manufacturer

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Ball Valves

ExclusiveProLock 1/2 in. Push-to-Connect Plastic Shut Off Valve (2-Pack)
current product
1/2 in. Push-to-Connect Brass Slip Ball Valve
ExclusiveProLock 3/4 in. Push-to-Connect Plastic Shut Off Valve (2-Pack)1/2 in. Full Port pushfit Ball Valve Water Shut Off Push to Connect PEX Copper CPVC Brass (2-Pack)
BrandSHARKBITESharkBiteSHARKBITEThe Plumber's Choice
NameProLock 1/2 in. Push-to-Connect Plastic Shut Off Valve (2-Pack)1/2 in. Push-to-Connect Brass Slip Ball ValveProLock 3/4 in. Push-to-Connect Plastic Shut Off Valve (2-Pack)1/2 in. Full Port pushfit Ball Valve Water Shut Off Push to Connect PEX Copper CPVC Brass (2-Pack)
Price
$2392
$2497
$2789
$3314
/package
Ratings
(41)
(400)
(40)
(5)
ConnectionPTCPTC x PTCPTC x PTCPTC
Valve Inlet Diameter (in.)1/21/23/41/2
Valve Outlet Diameter (in.).50.5.750.5
Inlet Diameter (In.)1/21/23/41/2
Compatible Pipe MaterialMulti-PurposeMulti-PurposeMulti-PurposeMulti-Purpose
Outlet Diameter (In.)1/21/23/41/2
ApplicationPotable WaterPotable WaterPotable WaterHydroponics,Potable Water
Valve UseWaterWaterWaterWater
MaterialPlasticBrassPlasticBrass
View ProductView ProductView ProductView Product

Specifications

Dimensions

Inlet Diameter (In.)1/2Outlet Diameter (In.)1/2
Product Depth (in.)1.13Product Height (in.)2
Product Length (in.)1.13Product Width (in.)6.25
Valve Inlet Diameter (in.)1/2Valve Outlet Diameter (in.)0.5

Details

ApplicationPotable WaterBullet Spec 01Compatible with PEX, copper, CPVC, PE-RT, and HDPE pipe
Compatible Pipe MaterialMulti-PurposeConnectionPTC x PTC
FeaturesRemovableHandle StyleLever
Indoor/OutdoorIndoor,OutdoorMaterialBrass
Maximum Pressure (psi)200Maximum Working Temperature (F)200
Pack Size1Product Weight (lb.)0.464
Returnable90-DayValve TypeBall
Valve UseWater

Warranty / Certifications

Manufacturer WarrantyFor warranty information on this product, please call our Internet Customer Service Center at 1-877-700-4242.

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 4.8
    out of 400 reviews
  • 96%recommend this product
Filter by:
Showing 1-10 of 400 reviews
Space needed on rigid line
My main supply line valve was a compression type. It was corroded and leaking. So I decided to replace it. After the city supply valve was turned off, I cut out the old valve. All in all it's worked perfectly. However, here's what I'd like to communicate... The instructions say that it's supposed to cover a gap of up to 2in... Well, I cut the 2in section and it wasn't big enough for me to slip it on. So, long story short, I ended up cutting a total of 6&5/8ths out of the original pipe and using 3&7/8ths with a sharkbite coupling and the slip ball valve... That being said, maybe I could have just cut out 2&3/4ths inches. I haven't had full pressure for years because I was so nervous to mess with it.
by
    Very handy valve for wherever you need to place one.
    I installed one of these on my outside hose bib line because the old multi-turn valve stopped working. It was pretty easy to install; just cut a 2" section of pipe out and clean both ends. Then slide the fitting on one end and back, insert the other end and use the release tool to slide the valve back onto the second end. Took me 20 minutes. No cutting pipe in different areas and soldering! Five years later I have no leaks. The valve also works great too. It is a quarter turn so it is easy on/off and is more reliable than the old gate valves.
    by
    • Recommended
    1 found this review helpful
    Easy to use. Just cut the CPVC squared and deburred the ends, and shoved it together. Seriously i...
    Easy to use. Just cut the CPVC squared and deburred the ends, and shoved it together. Seriously its that easy!
    by
    • Verified Purchase
    • Recommended
    1 found this review helpful
    Easy to install. With cutting out old plumbing and installing it was a total of 10-15 mins. Wife ...
    Easy to install. With cutting out old plumbing and installing it was a total of 10-15 mins. Wife was happy. Slipped on easily and works like a charm. I have some plumbing experience and this was easiest of all. Pricey but worth the cost in ease and headaches.
    by
    • Verified Purchase
    • Recommended
    1 found this review helpful
    My husband loves sharkbite! He is a contractor and anytime he needs to do plumbing with any type...
    My husband loves sharkbite! He is a contractor and anytime he needs to do plumbing with any type of faucet work, this is his Go-to. They are quick, reliable, and easy. My husband wanted to reconnect water lines to the wash tub in the laundry room, from the water lines connected to the bathroom. The person that owned the house b4 disconnected the water lines from the wash tub and ran them to the 2nd bathroom instead. So my husband decided he would hook the lines up with the shark bite connectors. So we went to THD and purchased the shark bites and lines to reconnect and hook up the wash tub. The job from start to end was a 1/2 hour. We have also used these in our previous houses for sink faucets in the kitchens and bathrooms. Every plumber we know recommends them, too. They are 100% worth the extra cost. Just get 'em.
    by
    • Verified Purchase
    • Recommended
    1 found this review helpful
    very easy to install and the slip extension was very helpful in reaching a perfect fit.
    very easy to install and the slip extension was very helpful in reaching a perfect fit.
    by
    • Verified Purchase
    • Recommended
    This valve saved me a hefty plumber's bill for replacing a shutoff valve for my water heater--if ...
    This valve saved me a hefty plumber's bill for replacing a shutoff valve for my water heater--if and when they might find the time to get to me (they said 2 weeks!). That's a long time to go without hot water. Someone told me about the SharkBite products--that require no soldering and simply slip on and push to connect. Sure enough, I simply cut out the valve using a "Rigid" low profile tubing cutter (from HD), removing some extra copper pipe. I polished the cut ends of the existing pipe with 0000 steel wool (don't use sandpaper), and connected the valve. Snap! I had already inserted a short piece of copper pipe into the slip part of the SharkBite valve and installed a SharkBite coupling on the other end of the existing pipe. Then with the slip tool (included with the SharkBite slip valve), I slipped the piece of copper tube in the valve, up and into the coupling... Snap! Done! The whole job can be done in 30 minutes. I understand these are code approved. They work on any combination of Copper, CPVC, PE-RT, and PEX Pipe. They warranty these for 15 years. I'm not sure if that means that they will ultimately fail, sometime after that? I hope not. Highly recommend! Will use again. I think I might re-plumb my whole house! There are good videos for using these.
    by
    • Verified Purchase
    • Recommended
    3 found this review helpful
    This product worked slicker than snot.... I used dawn dish soap to lube up the copper and pex pip...
    This product worked slicker than snot.... I used dawn dish soap to lube up the copper and pex pipe I was splicing. Pushed it down the pex and slipped it back up the copper pipe. Save me a boat load of time. thought it was way over priced but it did the job I needed it to. Original valves froze and started leaking.
    by
    • Pro
    • Verified Purchase
    • Recommended
    1 found this review helpful
    If you'd told me a couple of weeks ago that the main water shutoff to my house was toast and need...
    If you'd told me a couple of weeks ago that the main water shutoff to my house was toast and needed to be replaced, I'd have been bummed. If you'd told me I was going to replace it myself, I'd have said you were out of your mind. But today, in well under an hour, I cut out the old gate valve on the lateral coming into my house, and installed a new Sharkbite 3/4" slip ball valve, with no problems whatsoever. Now, I'm pretty handy around the house, but beyond pulling/setting a toilet, or swapping out a faucet set, plumbing is NOT my thing. With these new push-to-connect fittings from SharkBite though, the game has changed. Honestly, the whole process couldn't have been more painless. I know I just saved myself a few hundred dollars, and couldn't be more pleased. A few pieces of advice: 1) Get and use the SharkBite deburring/depth tool. If your access to use it is limited (my pipe was less than an inch from a block wall), you can cut it up with a hacksaw. 2) When you prep the ends of your pipes with the tool, go ahead and mark the depth on the pipe with a marker, like they tell you to do in the instructional videos. It takes all the guess work out of knowing whether you have the fitting seated all the way onto the pipe. Seriously, do this. 3) Getting the fittings to release using the disconnect clip can be a little tricky. What worked for me was to press the disconnect clip hard against the fitting, while simultaneously rotating it about a half or quarter turn around the pipe to get the fitting to fully release.
    by
      • Recommended
      12 found this review helpful
      Simply the best solution for the home plumber! Easy to install. Quality Construction
      I've been using Sharkbite products for nearly a decade now and simply love them. They never fail and they install so easily. Each component is built from high quality brass and steel, no plastic fittings here. I had to install a new water supply on the outside of the house and the only shut off was the main shut off valve by the water meter. This Sharkbite fitting allowed me to quickly add a shut off valve close to the area I was working in and let me turn the water back on to the rest of the house while I worked. Installation of this slip style ball valve could not be easier. You will cut 2 inches of pipe from the line you want to install the valve on. Line up the new valve and slide the long slip end onto the pipe first. Then you line up the remaining open end and shove the pipe into the fitting. Adjust the valve using the included orange release clip until the pipe is bottomed out in the non-slip end. It's all done in 30 seconds. The valve itself operates easily and the handle is large and strong. You get a solid stop whether opening or closing the line. Sharkbite saves you a fortune in plumber costs and gives you confidence that you won't have leaks and satisfaction that you did it yourself. I recommend Sharkbite connections to everyone I know.
      by
      • Recommended
      8 found this review helpful
      Showing 1-10 of 400 reviews