#1 Home Improvement Retailer

Internet #204727767

Model #24763

Store SKU #1000030180

Store SO SKU #1000317360

1/2 in. Push-to-Connect x 3/4 in. MHT Brass Washing Machine Outlet Box

$3517
Apply Now
Pay $10.17 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Push to Connect system, quick and easy installation in seconds
  • 3/4 in. Machine Host Thread - Quarter Turn Brass Ball Valves
  • Forward mounted valves give easy access for on/off operation
Store
0 in stock
Text to Me
How to Get It

Frequently Bought Together

+
+
Price:
$3517

Product Overview

The SharkBite Washing Machine Outlet Box features an instant Push-to-Connect connection and can be used with copper, CPVC or PEX lines. Each fitting increases ease of use while decreasing the time and effort needed to connect water distribution pipe. There is no glue, soldering or crimping needed. Simply cut your pipe, deburr, mark the pipe approximately 1 in. (for proper insertion depth), install pipe to proper depth and you're done. The kit includes the Washing Machine Outlet Box, Hot and Cold 1/2 in. SharkBite Push-to-Connect x 3/4 in. MHT Valves, Faceplate Cover, 2 Support Brackets. Perfect for use in your Laundry room to provide a clean installation and allow for easy shut-off to protect your home when away and washing machine is not in use to guard against accidental leaks.
  • Lead free DZR brass construction for durability and reliability
  • 3/4 in. machine hose thread - quarter turn brass ball valves
  • Forward mounted valves give easy access for on/off operation
  • Can be inverted for top mount and center drain option
  • EZ out test caps are raised for easy removal and knock-outs are oversized so they won't fall down the drain
  • Extended mounting flange provided
  • Back of box rests against the back sheetrock for sturdy recessed box installation
  • Innovative push-fit design makes for quick and easy installation
  • Meets UPC, IPC and cUPC requirements
  • Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
  • 1/2 in. pipe insertion depth = 15/16 in.
  • Shop all SharkBite Fittings
  • Find additional savings at your local PRO Desk with the Buying Guide
  • California residents

Additional Resources

From the Manufacturer

Compare Similar Washing Machine Valves

current product
1/2 in. Push-to-Connect x 3/4 in. MHT Brass Washing Machine Outlet Box
Quadtro 2 in. Copper Sweat Connection Washing Machine Outlet Box with 1/4 Turn Brass Screw-On Ball ValvesCentro II 1/2 in. Copper Sweat Washing Machine Outlet Box with Water Hammer ArrestorLaundry Mate 1/2 in. Plastic Drain Box with Brass Valve with Arrestors
BrandSharkBiteOATEYOATEYSymmons
Name1/2 in. Push-to-Connect x 3/4 in. MHT Brass Washing Machine Outlet BoxQuadtro 2 in. Copper Sweat Connection Washing Machine Outlet Box with 1/4 Turn Brass Screw-On Ball ValvesCentro II 1/2 in. Copper Sweat Washing Machine Outlet Box with Water Hammer ArrestorLaundry Mate 1/2 in. Plastic Drain Box with Brass Valve with Arrestors
Price
$3517
$4562
$5386
$6143
Ratings
(106)
(175)
(7)
(0)
ConnectionPTCSweatSweatNPSM
Compatible Pipe MaterialMulti-PurposeCopperCopperPEX
MaterialBrassCopperCopperBrass
ApplicationPotable WaterRough-In valveRough-In valve,Water SupplyRough-In valve
Maximum Working Temperature (F)200100120160
THD SO SKU1000317360
View ProductView ProductView ProductView Product

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 3.8
    out of 106 reviews
  • 72%recommend this product
Filter by:
Showing 1-10 of 106 reviews
Disappointing for Shark Bite
Limited words here so can't explain all that's wrong. You have to remove valves and reassemble which results in the valves rounding the plastic because of the poor knockouts. Adapter necessary for the drain (2" instead of standard 1 1/2").
by
    Exactly was I was looking for
    This is really easy to install. The sharkbite connectors made it really easy to install new PEX lines.
    by
    • Verified Purchase
    Works as described! Looks great!
    Great product! Looks good. The shark bite connectors work perfect!
    by
    • Verified Purchase
    • Recommended
    My old outlet box was replaced with this one that contained the hot and cold water connections. M...
    My old outlet box was replaced with this one that contained the hot and cold water connections. My old connections were leaking and corroded. Because I didn't want to try to install this myself, I used a professional plumber. He had to cut out a section of the drywall and sever the old water pipes before he could install the outlet box. The simple part was putting the drywall back and spackling up the section and reconnecting the washer with new lines. The push to connect made the setup easier...but getting to that point was the difficult part. Unless you're a pro, hire somebody that is.
    by
    • Recommended
    This is a low-quality product that takes more time to install than conventional washer boxes, sin...
    This is a low-quality product that takes more time to install than conventional washer boxes, since it is pre-assembled in a configuration that works in only some applications, and the knockouts for the drain are not easily knocked out but instead should be carefully drilled out with a hole saw to avoid damage to the thin plastic box. Typically a washer box has the drain in the middle between well-spaced valves, but not this product. A better solution might be to use a conventional washer box with SharkBite connectors to the shutoff valves if SharkBite connections are required.
    by
    Response from RWC SupportJul 1, 2020
    Hello, we are sorry to hear about the issue you experienced with the SharkBite Washing Machine Outlet Box and we understand your frustration. We will take your feedback about the configuration and drain knockouts into consideration when we review the product for updates. Please give our Customer Service Team a call at 1-877-700-4242 so we can assist further. SharkBiteCashAcme
    our washing machine and dryer are located in the garage and we recently decided to move the locat...
    our washing machine and dryer are located in the garage and we recently decided to move the location of them closer to the garage side door to help with access when a car is parked inside. I decided to use the Sharkbite brass washing machine outlet box to make installation easier and to recess the connections as to give a little more space between the washing machine and the car. the outlet box comes with brackets to mount it to the studs (i would have liked metal brackets instead of plastic) and ran PEX water lines from the original location to the outlet box, the line slipped in perfect with no leaks. I used PVC drain line from the old drain connection to the outlet box and it fit right in.looks nice, time to hook up the washing machine!
    by
    • Recommended
    This is a well-conceived product which will work in many installation configurations. The simple...
    This is a well-conceived product which will work in many installation configurations. The simple push-to-connect sharkbite connectors work with 1/2" copper or "pex" supply lines, and the 1/4 shut-off valves are easy to operate. What makes this product even better is the flexibility to have the inlet pipes and the drain outlet arranged in any configuration. As shown on the packaging, the drain outlet has knock-outs for three different locations - left, center, or right . It would even allow for the supply lines to come in from the top.
    by
    • Recommended
    This is going into the out building laundry room when construction starts back after the virus is...
    This is going into the out building laundry room when construction starts back after the virus is gone. The out building is going to be made into a guest house. I have one like this in the house. They are not new to me. Though the SHARK BITE is somewhat easy to install I sill would suggest using a plumber. I am a plumber so it is no problem to me. I would suggest the person doing the drywall also install it.
    by
    • Recommended
    This is a review for the Sharkbite washing machine outlet box.  The valves have a ½” connection. ...
    This is a review for the Sharkbite washing machine outlet box.  The valves have a ½” connection. I do not have PEX piping for my washing machine connections but I do have 1/2” CPVC piping and was able to easily connect it to the valves. The outlet box came with the hot and cold valves, 2 support brackets and a faceplate cover. There are 2 bottom knockouts 1 on each side of the valves for the drain. The one problem I encountered was my existing drain is located between the hot and cold piping, but  with this Sharkbite setup all I had to do was remove the valves, flip the box over and pop out the 3 knockout holes,  2 for the valves, and the middle one for the drain. The instructions are only 1 page but they are very detailed and explain the installation clearly. Overall this is a great product!
    by
    • Recommended
    1 found this review helpful
    Quick and easy is the best way to describe this washing machine outlet. Because of the 1/2 in. Pu...
    Quick and easy is the best way to describe this washing machine outlet. Because of the 1/2 in. Push-to-Connect line connections and the snap in nailing straps all you need is a place to put it and you are finished. All you need for tools are a hammer or a screw gun and in seconds your box is install. It has a clean finish with the push in trim frame and brass color coded valves. In my case it can also be used upside-down for feed lines that are coming from the ceiling. I hope this helps with your decision. Good luck with all your projects.
    by
    • Recommended
    Showing 1-10 of 106 reviews