#1 Home Improvement Retailer

Internet # 202270612

Model # 23036-0000LF

Store SKU # 745645

1/2 in. Push-to-Connect x 3/8 in. O.D. Compression Chrome-Plated Brass Quarter-Turn Angle Stop Valve

$12.45
Buy 12 or more $7.47
  • Fastest way to connect stop valve to PEX, copper, CPVC stubouts
  • Full-port brass ball with quarter-turn shut-off
  • Requires no special tools to install on hot or cold stubouts
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details

About This Product

SharkBite Push-to-connect stop valves are the fastest way to connect to PEX, copper, CPVC, or PE-RT stubouts. These valves control the flow of water to plumbing fixtures including faucets, toilets, dishwashers, washing machines, and ice makers. Braided supply lines, PEX, or copper tubing can be used to connect the outlet of the valve to plumbing fixtures. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal.

Highlights

  • Works on wet lines, rotatable after installation, and removable
  • Push-to-connect fittings are ideal for installation in tight spaces
  • Rated to 160 degrees Fahrenheit and 125 PSI
  • Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
  • Chrome-plated exterior body
  • Low-lead DZR corrosion-resistant brass body
  • Code approved, IAPMO listed, for details see Specifications
  • 2-Year warranty when used with PEX, copper, CPVC & PE-RT pipe
  • Meets all UPC, IPC and cUPC requirements
  • Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
  • 1/2 in. pipe insertion depth = 15/16 in.
  • Shop SharkBite for all you Supply plumbing needs
  • Return Policy
  • California residents
     see Prop 65 WARNINGS

Product Information

Internet # 202270612

Model # 23036-0000LF

Store SKU # 745645

Specifications

Dimensions: H 2.57 in, W 1.65 in, D 1.65 in

Dimensions

Inlet Diameter (In.)

1/2

Inlet Size

1/2 In.

Outlet Diameter (In.)

3/8

Product Depth (in.)

1.65 in

Product Height (in.)

2.57 in

Product Length (in.)

1.25 in

Product Width (in.)

1.65 in

Valve Inlet Diameter (in.)

1/2

Details

Application

Potable Water

Color/Finish

Stainless Steel

Color/Finish Family

Chrome

Compatible Pipe Material

Multi-Purpose

Compatible Product

Faucet, Toilet

Connection

PTC x Comp

Features

Quarter Turn

Indoor/Outdoor

Indoor

Inlet Fitting End Type

Push to Connect

Material

Brass

Maximum Pressure (PSI)

125 PSI

Maximum Working Temperature (F)

160

Outlet Fitting End Type

Compression

Pack Size

1

Product Weight (lb.)

0.252 lb

Returnable

90-Day

Stop Valve Type

Angle

Valve Configuration

Angle

Valve Connection

Push Connect

Valve Type

Supply Stop

Warranty / Certifications

Manufacturer Warranty

For warranty information on this product, please call our Internet Customer Service Center at 1-877-700-4242.

Questions & Answers

56Questions
caret
Q:Will this work on polybutylene
by|Jan 24, 2024
1 Answer
Answer This Question

A:  is not compatible with polybutylene pipe by itself. There's a transition coupling from polybutylene pipe to copper or PEX pipe.

by|Jan 29, 2024
    caret
    Q:Will this valve work on uponor
    by|Dec 12, 2023
    1 Answer
    Answer This Question

    A:  Hi Steve, The SharkBite 1/2 in. Push-to-Connect x 3/8 in. O.D. Compression Chrome-Plated Brass Quarter-Turn Angle Stop Valve will work on any PEX pipe that has been tested to the (ASTM F876) standard. This is the standard for push-to-connect fittings. If the Uponor pipe has been tested for push-to-connect fittings you will find the information printed on the pipe. If you have any more questions you can call tech support at 877-700-4242. Kind regards,

    by|Mar 23, 2024
      1 found this answer helpful
      caret
      Q:If the valve does not have a plastic insert after I removed it after the first installation attempt, is it possible the plastic insert fell loose into my copper pipe and if so, is that something I have to remove from inside the copper pipe?
      by|Dec 10, 2023
      1 Answer
      Answer This Question

      A:  Hi Meesha, If the pipe support/stiffener comes out of the SharkBite 1/2 in. Push-to-Connect x 3/8 in. O.D. Compression Chrome-Plated Brass Quarter-Turn Angle Stop Valve then you should remove the pipe support/stiffener from the copper pipe so it doesn't affect water flow. If you have any more questions you can call tech support at 877-700-4242. Kind regards,

      by|Dec 13, 2023
        caret
        Q:Why does this valve not have a white plastic insert whereas the valve that is included with the water hose connection does have a white plastic insert?
        by|Dec 7, 2023
        1 Answer
        Answer This Question

        A:  Hi Meesha, The SharkBite 1/2 in. Push-to-Connect x 3/8 in. O.D. Compression Chrome-Plated Brass Quarter-Turn Angle Stop Valve should have a white plastic insert. The insert is a requirement when working with PEX pipe. You do not have to use the insert when working with Copper or CPVC pipe. If you have any more questions about our products you can call tech support at 877-700-4242. Kind regards,

        by|Dec 8, 2023
          Showing 1-4 of 56

          Customer Reviews

          4.9 out of 5

          • 4.9 out of 1,185 reviews
          • 97% recommend this product
          Filter by:
          Showing 1-10 of 1,185 reviews
          Life saver
          This is the first time I used SharkBite for an emergency repair, it delivered above expectations and made the repair quick and easy. I had to use a coupling to extend the ½ PVC through 2X4 into an Elbow that leads to Shutoff. SharkBite had it all and made the entire repair easy and quick. I can't think of any negative on this valve.
          by
            • Recommended
            Leaked
            Bought valve a couple of years ago and installed on a toilet supply line. Recently had to remove and reinstall the toilet about a month ago. No apparent issues until today when I noticed water damage on the baseboards. Found water leaking from the threaded portion of the valve. Water had been slowly dripping for some time. This bathroom is not often used. Baseboard is ruined and floor is damaged. Thought maybe the supply line needed tighted, so attempted to tighten it, hardly any pressure on the wrench and the threaded end broke right off the valve. Now water was spraying under high pressure all over the bathroom until I could get it shut off. Have bought and used Sharkbite fittings many times before with no issues, not sure I will replace this one with another Sharkbite brand valve.
            by
              Amazing product
              I just bought one of these at my local HD. Amazing product. Took a few hours to get the old valve and the very stubborn compression ring off. Then bought the old fashioned valve. Compression ring wouldn't tighten. Returned it and the HD plumbing guy recommended this sharkbite valve. Took maybe a minute to push on and reconnect the line to the toilet. No leaks. Highly recommend this product!!!!!
              by
                • Recommended
                1 found this review helpful
                Ease of Installation and clean look
                I must admit I was hesitant about just "push to connect" but the simplicity of it was worst the risk. I have now use many of these valves in multiple occasions and it is as easy as they say. I'm going from copper to flex pipe (PEX) in all the applications I have use them. No more solder! Yay! Make sure you have no burrs or debris in your copper (well sanded) and straight clean cut.
                by
                  • Recommended
                  Great option for renovations
                  I bought these for a DIY bathroom remodel. I read another review about being able to easily install and remove these valves for their reno. This is exactly what I wanted to do too. i.e. shut of the main water supply, move/install new water supply (copper) pipes and install these valves. Turn the house water back on. When ready to install drywall, turn house water off, temporarily remove the valves, install drywall over pipes, trim pipe to final length, install escutcheon plates, re-install valves. This is a lot less (hot) work than soldering/removing a temporary end-cap. What I didn't expect was the ability to rotate the valve after installation. This was really handy when I needed to purge the air from the supply line. Just rotate the valve so it's pointed into a bucket and turn the valve on purge the air/water into the bucket. Rotate the valve back when you're done.
                  by
                  • Verified Purchase
                  • Recommended
                  We have a defective valve
                  I have purchase shark bite valves and couplings in the past to make transitions between our cpvc pipe and new pipe or new fixture lines. We got a valve last weekend that must have a small crack in a seam. It was impossible for me to remove to replace because of its position in front of a wall. Had to hire a plumber instead. My husband took a video of a fine spray coming out of the seam. This has been very disappointing.
                  by
                    Best time-saver I have encountered in a long time! Plumbing is my nemesis so the quicker I'm done...
                    Best time-saver I have encountered in a long time! Plumbing is my nemesis so the quicker I'm done, the happier I am. Installed a toilet and the water pipe was short. Any heat might have messed up the wall in a very tight space. Sharkbite made it easy.
                    by
                    • DIY
                    • Verified Purchase
                    • Recommended
                    1 found this review helpful
                    Very Good Quality.
                    Super easy to install. Great for use on exposed pipes. No issues yet.
                    by
                    • Verified Purchase
                    • Recommended
                    TOP NOTCH !
                    As a 66 year old home owner I've changed a few water line valves on toilets and sinks over the years and these Sharkbite valves have made this task the easiest I've ever had it. Perfect results in way less time and hassle with no swearing ! A winner in every category !
                    by
                      • Recommended
                      4 found this review helpful
                      Our sink did not have shut off valves, and we wanted to install a new faucet. We used two of thes...
                      Our sink did not have shut off valves, and we wanted to install a new faucet. We used two of these to install shut off valves for each pipe after cutting the soldered pipes. They worked great and were easy to install.
                      by
                      • Verified Purchase
                      • Recommended
                      2 found this review helpful
                      Showing 1-10 of 1,185 reviews