#1 Home Improvement Retailer

Internet # 323676040

Model # UR22222

Store SKU # 282971

Max 1/2 in. Brass Push-to-Connect Ball Valve

$22.65
  • Fastest way to connect PEX, copper, CPVC, or PE-RT pipe
  • Half the insertion force with double the burst pressure
  • Can be installed on wet lines and pressure tested immediately
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy

Product Details

About This Product

SharkBite Max push-to-connect ball valves are the fastest and easiest way to install a new or replacement water shut-off valve. A newly designed stainless steel collet retainer delivers additional strength and durability and provides a 250 psi pressure rating. SharkBite Max fittings and valves don't require a PEX tube liner and a re-engineered body allows you to insert the pipe using less force and greater ease. The single lever quarter turn handle allows for quick control over water flow, especially in tight spaces. No soldering, clamps, unions, glue, or special tools required. After inserting the pipe, stainless steel teeth bite down and grip the pipe tightly while a specially formulated O-ring compresses around the pipe to create a watertight seal. The valve can be rotated after installation for quick adjustments, and removing the valve is just as fast with a disconnect tool, allowing them to be changed or reused.

Highlights

  • Compatible with PEX, copper, CPVC PE-RT, or HDPE pipe
  • Requires no special tools to install on hot or cold-water lines
  • Can be installed on wet or dry lines pressure tested immediately
  • Rotatable after installation and removable
  • PEX tube liner not required
  • Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
  • Low-lead DZR corrosion-resistant brass body
  • Rated to 200°F and 250 psi
  • Code approved, IAPMO Listed for details, see specification
  • 25-year warranty when used with PEX, copper, CPVC and PE-RT pipe, see warranty
  • Return Policy
  • California residents
     see Prop 65 WARNINGS

Product Information

Internet # 323676040

Model # UR22222

Store SKU # 282971

Specifications

Dimensions: H 2.15 in, W 1.13 in, D 5.36 in

Dimensions

Inlet Diameter (In.)

1/2

Outlet Diameter (In.)

1/2

Product Depth (in.)

5.36 in

Product Height (in.)

2.15 in

Product Length (in.)

5.36 in

Product Width (in.)

1.13 in

Valve Inlet Diameter (in.)

1/2

Valve Outlet Diameter (in.)

.5

Details

Application

Potable Water

Compatible Pipe Material

Multi-Purpose

Connection

PTC x PTC

Features

Lead Free, Removable

Handle Style

Lever

Indoor/Outdoor

Indoor, Outdoor

Material

Brass

Maximum Pressure (PSI)

250 PSI

Maximum Working Temperature (F)

200

Pack Size

1

Product Weight (lb.)

0.45 lb

Returnable

90-Day

Valve Type

Ball

Valve Use

Water

Warranty / Certifications

Manufacturer Warranty

Must be installed per installation instructions.

Questions & Answers

53Questions
caret
Q:is the Shark Bute 1/2 inch ball valve a full-port valve?
by|Jun 3, 2024
1 Answer
Answer This Question

A:  Hi Arthur, Thank you for contacting SharkBite. The Max 1/2 in. Brass Push-to-Connect Ball Valve is a full port valve. If you have any more questions you can call tech support at 877-700-4242. Kind regards,

by|Jun 3, 2024
    caret
    Q:Will this work on a manufactured home that gas polybutylene?? Need to replace valve
    by|Dec 18, 2023
    1 Answer
    Answer This Question

    A:  Hi, The SharkBite Max 1/2 in. Brass Push-to-Connect Ball Valve will not work on gas applications. It will work on potable water and hydronic heating applications. If you have any more questions you can call tech support at 877-700-4242. Kind regards,

    by|Dec 18, 2023
      caret
      Q:How much water pressure can it hold ?
      by|May 10, 2023
      1 Answer
      Answer This Question

      A:  Hi, The SharkBite 1/2 in. Brass Push-to-Connect Ball Valve has been tested to with stand 200psi. I've attached the spec sheet which covers this information. If you have any more questions you can call tech support at 877-700-4242. (https://www.homedepot.com/p/SharkBite-1-2-in-Brass-Push-to-Connect-Ball-Valve-22222-0000LF/202270642) (Kind regards,)

      by|Jul 3, 2023
        caret
        Q:How much pipe do I need to put shark bite on
        by|Mar 12, 2023
        1 Answer
        Answer This Question

        A:  Hi, The SharkBite 1/2 in. Brass Push-to-Connect Ball Valve requires 15/16" for insertion depth on each side of the valve. We recommend you have at least one inch of pipe on both sides of the valve for removal. If you have any more questions you can call tech support at 877-700-4242.(Kind regards,)

        by|Dec 31, 2023
          1 found this answer helpful
          Showing 1-4 of 53

          Customer Reviews

          4.9 out of 5

          • 4.9 out of 1,102 reviews
          • 97% recommend this product
          Filter by:
          Showing 1-10 of 1,102 reviews
          Failure after 1 year DO NOT BUY THIS PRODUCT
          Installed this valve, after 1 year the product failed and leaked, causing damage to insulation drywall and light fixture. The couplings held, however the product did not see the image. I would not trust these in my home. Now replacing others I installed.
          by
          Response from RWC SupportJan 24, 2024
          Hello, we are sorry to hear about the difficulty you experienced with the SharkBite Max 1/2 in. Brass Push-to-Connect Ball Valve and we understand your frustration. We will take this feedback into consideration when reviewing the product for updates. If you have any more questions you can call our technical support team at 1-877-700-4242. Kind regards, SharkBiteCashAcme
            Expensive but worth it
            Great product, never had a problem with it
            by
            • Verified Purchase
            • Recommended
            Quick and easy
            Quick, easy, and did exactly what its supposed to do.
            by
            • Verified Purchase
            • Recommended
            Loved the simplicity & speed of the installation.
            Loved the simplicity & speed of the installation. After I had installed the 2 shutoff valves I realized I was able to turn the valves completely around which was very convenient. Best of all no leaks.
            by
            • Verified Purchase
            • Recommended
            1 found this review helpful
            Push-to-Connect Ball Valve for copper-to-copper connection.
            I wanted to add some valves to the water lines going into the laundry room so I could isolate just that part of the lines without having to impact the other areas of the house. The lines going into the laundry room also fed the 1st floor bathroom. Now I can turn off the flow to the laundry room without having to cut the flow to the bathroom.
            by
            • Verified Purchase
            • Recommended
            1 found this review helpful
            Used these to replace old existing CPVC valves. They make the job quick and easy.
            Used these to replace old existing CPVC valves. They make the job quick and easy.
            by
            • Verified Purchase
            • Recommended
            1 found this review helpful
            Absolute piece-of-cake installing this valve to both copper and PEX....
            Absolute piece-of-cake installing this valve to both copper and PEX. The valve handle turns easily. Watertight and easy. Solidly built. I couldn't ask for more. Beware cheap alternatives. How much is a reliable and leak-free plumbing job worth to you?
            by
            • Verified Purchase
            2 found this review helpful
            Great quality part. Quick and easy install. I had to...
            Great quality part. Quick and easy install. I had to replace one, was 5 minutes from start to finish.
            by
            • Verified Purchase
            1 found this review helpful
            I'm a DIYer and this was so easy to install. Just make the end of the pipe flush and push togeth...
            I'm a DIYer and this was so easy to install. Just make the end of the pipe flush and push together. No glue, no mess.
            by
            • DIY
            • Verified Purchase
            • Recommended
            1 found this review helpful
            Great product,easy to use.Easy to install.I find shark bite products on the expensive side of doi...
            Great product,easy to use.Easy to install.I find shark bite products on the expensive side of doing repairs but they are so easy to use and saves a ton of money on a plumber.Another great thing about the product is that they are reusable.
            by
            • Verified Purchase
            • Recommended
            1 found this review helpful
            Showing 1-10 of 1,102 reviews

            Compare Similar Items