Internet #206105353

Model #25024

Store SKU #1001382840

Push-to-Connect Ice Maker Installation Kit

  • Comes with everything needed to install water supply to ice maker
  • Works on any combination of Copper, PE-RT, CPVC, PEX Pipe
  • Disconnect tool also included for changing out valves/fittings
  • See More Details

Frequently Bought Together

+
+
Price:
$2978

Product Overview

Installation requires no use of expensive tools, glues, solders, solvents, or crimping; all you need are pipe cutters.

No Tools Required

Installation requires no use of expensive tools, glues, solders, solvents, or crimping; all you need are pipe cutters.

SharkBite Fittings are compatible with more than 5 pipe types: PEX, Copper, CPVC, PE-RT and HDPE.

Versatility

SharkBite Fittings are compatible with more than 5 pipe types: PEX, Copper, CPVC, PE-RT and HDPE.

Installation is fast and simple within 3 seconds, allowing the job to get done in a snap.

Easy Fast Install

Installation is fast and simple within 3 seconds, allowing the job to get done in a snap. Allows fot the ability to work in tight spaces without having to make structural changes.

Man working with SB

Approved for Underground

Approved for burial applications (wrapping required when burying underground)

SharkBite Fittings are removable with disconnect clips or tongs, which will reduce the risk of installation errors

Error-Proof

SharkBite Fittings are removable with disconnect clips or tongs, which will reduce the risk of installation errors

Installation does not require a dry pipe and there is no need to wait for the pipe to drain, ProLock can be installed on a wet line.

Wet or Dry Applications

Installation does not require a dry pipe and there is no need to wait for the pipe to drain, ProLock can be installed on a wet line.

SharkBite owns the entire manufacturing process, from raw materials to finished product.

Quality you can trust

SharkBite owns the entire manufacturing process, from raw materials to finished product

Full range of fittings and accessories 1/4 in. - 2 in.; Large diameter fittings (1-1/4" - 2") required Stiffener when connection to PEX Pipe.

Versatile Fittings Collection

Full range of fittings and accessories 1/4 in. - 2 in.; Large diameter fittings (1-1/4" - 2") required Stiffener when connection to PEX Pipe

Listed by IAPMO and design certified.

Certified

Listed by IAPMO and design certified and listed to ASSE 1061, CSA B125.3, NSF 372, NSF/ANSI 61, ASTM E84, CAN/ULC S102.2, ASTM, E119, CAN/ULC S101,UL289

Rated to 200°F and 200 PSI

Working Temperature and Pressure

Rated to 200°F and 200 PSI

Made of durable DZR brass

Material

Made of durable DZR brass

Approved for behind-the-wall applications

Behind the Wall

Approved for behind-the-wall applications

25 Year System Warranty

Reliability

25 Year System Warranty

The SharkBite Ice Maker Installation Kit has everything you need to install the water supply to your Ice maker. The kit includes 1 SharkBite 1/2 in. Service Slip Tee, one 1/2 in. x 1/4 in. (3/8 in. O.D.) Push-to-Connect Angle Stop Valve, a 10 ft. coil of 1/4 in. PEX Pipe, one 1/4 in. (3/8 in. O.D.) SharkBite x 1/4 in. O.D. Compression Connector, and a 1/2 in. and 1/4 in. disconnect clip to remove the pipe from the fitting if needed. The SharkBite Service Slip Tee allows you to remove up to 2 in. of your existing copper or CPVC line and add an angle supply stop valve. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included 10 ft. PEX coil connects to the push-to-connect angle stop valve 1/4 in. outlet and the 1/4 in. Ice maker connector which will thread onto your Ice Maker. The pipe can be cut to the exact length needed so there is no excess supply line to coil providing a clean, tangle free look.
  • California residents
  • Lead free DZR brass construction for durability and reliability
  • For use with copper or CPVC pipe
  • Innovative push-to-connect design makes for quick and easy installation
  • Push-to-connect fittings require no solder, glue, unions or tools
  • Fitting can be rotated on pipe after installation making it easier to work in tight spaces
  • Designed for potable water distribution
  • Corrosion resistant to improve longevity
  • Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61
  • Meets all UPC, IPC, and cUPC requirements
  • Demount clip allows user to release the fitting from the pipe for convenient installation flexibility
  • Rated to 200°F and 200 psi
  • Shop all SharkBite Fittings

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Ice Maker Water Valves

1/2 in. Brass Push-to-Connect Ice Maker Outlet Box
current product
Push-to-Connect Ice Maker Installation Kit
1/2 in. Brass Push-to-Connect Ice Maker Outlet Box with Water Hammer Arrestor1/2 in. Push-to-Connect Brass Ice Maker Outlet Box with Water Hammer Arrestor
BrandTectiteSharkBiteTectiteSharkBite
Name1/2 in. Brass Push-to-Connect Ice Maker Outlet BoxPush-to-Connect Ice Maker Installation Kit1/2 in. Brass Push-to-Connect Ice Maker Outlet Box with Water Hammer Arrestor1/2 in. Push-to-Connect Brass Ice Maker Outlet Box with Water Hammer Arrestor
Price
$2566
$2978
$4020
$4490
Ratings
(71)
(125)
(30)
(36)
ConnectionPTC x CompPTC x PTCPTC x CompPTC x Comp
Compatible Pipe MaterialMulti-PurposeMulti-PurposeMulti-PurposeMulti-Purpose
ApplicationPotable WaterPotable WaterPotable WaterPotable Water
MaterialBrassBrassBrassBrass
Maximum Pressure (psi)200200200200
Valve TypeIce MakerIce MakerIce MakerIce Maker
Inlet Diameter (In.)1/21/21/21/2
View ProductView ProductView ProductView Product

Specifications

Dimensions

Inlet Diameter (In.)
1/2
Outlet Diameter (In.)
3/4
Product Depth (in.)
2.5
Product Height (in.)
2.5
Product Length (in.)
123.5
Product Width (in.)
0.75

Details

Application
Potable Water
Compatible Pipe Material
Multi-Purpose
Connection
PTC x PTC
Features
Removable
Indoor/Outdoor
Indoor
Material
Brass
Maximum Pressure (psi)
200
Maximum Working Temperature (F)
200
Product Weight (lb.)
0.921
Returnable
180-Day
Valve Type
Ice Maker

Warranty / Certifications

Manufacturer Warranty
For warranty information on this product, please call our Internet Customer Service Center at 1-877-700-4242.

Questions & Answers

22Questions21Answers

Will this work on a Kenmore that needs a Refrigerator Water Tube Fitting 4932JA3014A replacement?

Asked by Doug October 9, 2020
1
Answer

Most likely yes. You cut the existing pipe, removing burrs, and slide the Sharkbite on one end and then back to the other cut end. Then attach the flexible tube. I used it for a Whirlpool refrigerator/ice maker.

Will this kit hook to water pipe in mobile homes

Asked by Steve April 20, 2019
2
Answers

I do not see why not if you are hooking up to 1/2 inch copper pipe.

Do they make it for quarter inch and 1/2 inch PVC Supply line

Asked by rapidRon68 November 5, 2017
2
Answers

The package says it is compatible with 1/2 inch copper and CPVC for the slip end (household water supply line). The kit comes with ten feet of 1/4 inch PEX tubing to connect to the icemaker supply line that is on the fridge, with a shark bite connector to the PEX and a compression fitting to the supply line that is on the fridge (the smaller chrome piece in the picture). I do not know if you could substitute PVC or copper for the ice maker supply line. The angle stop in 1/2 to 1/4 inch.

I am getting extremely low water pressure out of the line going to my fridge line not kinked and valve open

Asked by Russ August 2, 2017
3
Answers

If your getting low flow water pressure trouble shoot it. #1. Is your filter due for a change? Very likely #2. Do you have good pressure at all your faucets/tub? Call a plumber #3. Did you push the water supply to far into the shark bite on the slip side or short side or both? #4. Is the Shark Bite valve open all the way? Mine was hard to turn open after installation.

Can this be used in series with a GE water filter. So from valve to water filer to fridge connect...

Asked by Jake July 21, 2017
2
Answers

Everything is in the package if your fridge has an ice maker water dispenser.

If my refrigerator already comes with a water tubing compression fitting coming off the fridge do I still need to use Sharkbite

Asked by Nate May 29, 2017
2
Answers

Not necessarily but if the pressure for the water dispenser is low, this kit might help. It did for me.

Does this pex push-fit into the shark bite icemaker outlet box?

Asked by Mike May 15, 2017
2
Answers

Yes

Can this be used on a Cut Galvanized Steel Pipe?

Asked by Mike April 28, 2017
2
Answers

Yes. Just make sure you deburr the pipe before connecting.

Is the kit supposed to come with a depth gauge? Mine didn't. What is the depth measurement?

Asked by Simmer71 March 23, 2017
3
Answers

If you intend to use a lot of Shark Bite fittings, their depth guage/de-burr tool is excellent.

Is the kit supposed to have a depth gauge? Mine didnt so what is depth measurement?

Asked by Simmer71 March 23, 2017
2
Answers

Short side won't let you push too far that I know but, the long side should be pushed in at least 1/2" to 1" in. If you use the deburring tool like they do in the video provided here on HD mark the pipe at the end of the tool when you debur the pipe and that will be your guide. Use a tape measure to cut NO more than 1/2 " of supply pipe off.

Push-to-Connect Ice Maker Installation Kit - page 2

Customer Reviews

  • 125 Customer Reviews
  • 4.7 out of 5 stars overall
92% of customers recommended.
Overall Ratings
5star-icon(107)
4star-icon(9)
3star-icon(1)
2star-icon(3)
1star-icon(5)
Sort By:
Works like a charm!
I installed this into a pex 1/2" cold water line. I bought the sharkbite depth tool and I'm glad I did. Take your time, go step by step, double check your work, and this kit works like a charm!
Was this helpful?
0
0
Easy to install if you follow instructions. Watching the video beforehand is helpful as well. E...
Ease of installation :
5
Quality :
5
Value :
5
Easy to install if you follow instructions. Watching the video beforehand is helpful as well. Excellent product for a DIY project at home. Only wish they would offer a kit with a longer PEX pipe (20-25 feet), as I had to purchase a 50 ft pipe separately to reach where I had to connect.
Was this helpful?
0
0
Caution with Whirlpool Regriderators
The connection that comes with this kit does not fit well with all make/model refrigerators. Specifically, with my model Whirlpool refrigeator you are unable to get a good male/female sealed connection at rear of your refriderator. I was lucky enough to notice the small leak before it destroyed my flooring. Sharkbite customer service is aware of the issue and they will send at no charge a different press fitting.
Was this helpful?
3
0
Response from RWC SupportAugust 14, 2019
Hi, Eddie. We are sorry to hear that the SharkBite Ice Maker Installation Kit did not work with your particular refrigerator. We will make sure our product managers are aware of the situation to take this into consideration when looking at new designs. Thanks for reaching out to our Customer Service Team and we are glad we were able to help with the situation. Our customers' satisfaction is important to us and we value your opinion. SharkBiteCashAcme
Perfect
I had a traditional saddle-style kit that began to leak in multiple places - at the handle and (weirdly) right in the middle of the tubing.This was more expensive than a simple replacement, but it's worth it. It more than doubled the water pressure at the fridge. It looks so much better and I'm pleased to know that this was done "the right way". And as with all Shark bite stuff, it's super easy.
Was this helpful?
0
0
I Love It!!!!
Bought this because the water dispenser on my refridgerator did not have much pressure. Filling up a 16oz glass would take 2 minutes! Took about 20 minutes to rip out the old tapper mechanism and replace it with this wonderful invention. Went from filling up a glass in minutes to a few seconds.
Was this helpful?
1
0
This is the easiest and best way to super charge your refrigerator ice maker and water dispenser....
This is the easiest and best way to super charge your refrigerator ice maker and water dispenser. Took me a whole 1/2 hour this morning to replace the old pin punch water supply hardware. This is the first of the Shark Bite hardware I have tried and I am very impressed.
Was this helpful?
0
0
Rochester NY
Couldn't be happier!
Ease of installation :
5
Quality :
5
Value :
5
Finally a plumbing project that went right the first time. Replaced my old self puncture saddle valve to this kit to increase the water pressure in the fridge water dispenser. We have gone from a trickle to high speed! Easy to install, took around 30 min in total. HIGHLY RECOMMENDED!
Was this helpful?
6
0
Knoxville, TN
Awesome waterline freezer kit
Ease of installation :
5
Quality :
5
Value :
5
I bought a mid size fridge with an ice maker for my garage and bought this Shark Bite ice maker water line kit to hook it up. I was really hesitant to try solder-less connections, but after seeing other reviews from around the web and actually trying it out for my self, I am totally sold on it. The installation was so easy. It only took me about 30 minutes total time. The only thing I don't like about this kit is that it does not come with an adapter to hook up a 1/4 inch screw on type hose directly to it. As you can see in my picture, I had to add an extra elbow connection to get this to work. The supply line they provide is not very long. I needed about 20 feet, so I bought a 25 foot vinyl line. I used about 8 inches of the line they supplied, then connected the 25 ft. vinyl line with the elbow connector. I'm still pleased with everything and especially since there were no leaks at all when turning the water on.
Was this helpful?
2
0
EASY!
Ease of installation :
5
Quality :
5
Value :
5
Seeds Program Review
(What's this)
I am not fond of plumbing work, but this is so easy to install! Cut out 2" of pipe, mark the correct insertion depth on the pipe, slide it on & pull it back to the correct depth, press on the valve, & then run the PEX tubing. Installation took less than 30 minutes, even though I tricked it out a little bit with an exterior ice-maker water filter. Besides the obvious ease of connection, I love that it has a quarter-turn shutoff. Reliable & simple. The PEX tubing is very easy to work with. It also comes with some decorative covers that conceal the connection points. I love this thing!
Was this helpful?
0
0
St. Louis
Fantastic for a 1st timer
Ease of installation :
5
Quality :
5
Value :
4
We recently received a new refrigerator with an ice maker (finally, yes. An ice maker!). This kit made tying into our existing 1/2" copper water lines super easy. Watch their videos on YouTube on how to install and yes, it's really that easy.
Was this helpful?
1
0
Review this Product
Share your thoughts with other customers