Internet #205916105

Model #SDWH27600G-RP1

Store SKU #1001338354

0.276 in. x 6 in. Strong-Drive SDWH Timber-Hex HDG Wood Screw

  • Sawtooth point design for fast and easy installation
  • Offers 0.93 in. integral washer for your convenience
  • Ideal for heavy-duty coastal and marine applications
  • See More Details

Frequently Bought Together

+
+
Price:
$198

Product Overview

Deck Glamour Photo

Deck It Out

Strong decks bring beauty and entertaining space to your outdoor living area

Deck Glamour Photo

Make Your Deck Beautiful and Safe

Building a safe, strong deck starts with the proper connectors and fasteners

Photo of a deck being built

Deck Building Tips and Tricks

Installing corrosion-resistant connectors and fasteners helps extend the life of your deck

SDWH Screw being installed into ledger

Ledger connections critical for deck safety

Strong-Drive® SDWH Timber-Hex HDG screw delivers high-strength, wood-to-wood connectivity, such as deck ledger applications

DTT2Z guardrail install

Guardrail Installation Tips and Tricks

Don’t take chances with guardrail connections. DTT2Z deck tension ties fasten guardrails to deck framing.

DTT1Z install

Securing the Deck to the House

Install DTT1Z as a tension tie to meet building codes and eliminate the need to access to the floor joists inside the home

LSCZ install

Take the Step to Secure Deck Stairs

LSCZ adjustable stair-stringer connector offers a concealed connection between the stair stringer and the carrying header or rim board

Tight LUS26Z install shot

Joist Hangers

Provides bearing and uplift resistance

Tight H1 install shot

Hurricane Ties

Ideal for preventing lateral movement of joists

Tight SD screw install photo

SD Connector Screw

The only screw approved with Simpson Strong-Tie connectors

Tight install shot of LCEZ4

Post Caps

LCEZ end post caps provide a post-to-beam connection in new or retrofit deck applications

Tight PBSZ install photo

Post Base

Features a 1 in. standoff to resist wood decay

Stainless-steel connector product shot

Prevent Corrosion

Deck-Drive DWP stainless-steel fasteners are recommended for higher-exposure environments or applications

The Strong-Drive SDWH Timber-Hex HDG screw is a hot-dip galvanized fastener suitable for heavy-duty marine and coastal applications. It's ideal for use in structural pilings, piers, docks, boardwalks and offers the lowest installed cost for comparable pile solutions on the market. No longer do you need to purchase expensive auger drill bits, separate washers, nuts or bolts. Installation time is faster because you install only from one side and no predrilling is required.
  • Features a SawTooth™ point design, which provides fast starts and no predrilling or separate washer needed
  • Burly 0.276 in. shank diameter ideally suited for heavy-duty structural applications
  • Premium ball-lock hex driver bit (included) holds the screw, allowing for easy placement
  • Oversized 0.93 in. integral washer eliminates the need for a separate washer
  • For best results, use a minimum of 1/2 in. low-speed corded drill to install
  • Length: 6 in.
  • ASTM A153 Class-C hot-dip galvanized coating suitable for coastal and marine environments
  • 3/8 in. hex drive for secure driving (replacement driver bit — BITHEXR38-134)
  • Common project applications: remodeling, fencing, storage, cabinets, framing
  • Shop all Simpson Strong-Tie here.

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Wood Screws

current product
0.276 in. x 6 in. Strong-Drive SDWH Timber-Hex HDG Wood Screw
0.276 in. x 5 in. Strong-Drive SDWH Timber-Hex Type 316 Stainless Steel Wood Screw0.276 in. x 6 in. Strong-Drive SDWH Timber-Hex Type 316 Stainless Steel Wood Screw0.276 in. x 8 in. Strong-Drive SDWH Timber-Hex Type 316 Stainless Steel Wood Screw
BrandSimpson Strong-TieSimpson Strong-TieSimpson Strong-TieSimpson Strong-Tie
Name0.276 in. x 6 in. Strong-Drive SDWH Timber-Hex HDG Wood Screw0.276 in. x 5 in. Strong-Drive SDWH Timber-Hex Type 316 Stainless Steel Wood Screw0.276 in. x 6 in. Strong-Drive SDWH Timber-Hex Type 316 Stainless Steel Wood Screw0.276 in. x 8 in. Strong-Drive SDWH Timber-Hex Type 316 Stainless Steel Wood Screw
Price
$198
$198
$198
$424
Ratings
(21)
(12)
(12)
(12)
Screw Length6 in5 in6 in8 in
Size#0#0#0#0
Drive StyleExternal HexExternal HexExternal HexExternal Hex
Head StyleHexHexHexHex
Fastener/Connector MaterialSteelStainless SteelStainless SteelStainless Steel
Interior/ExteriorExterior,InteriorExterior,InteriorExterior,InteriorExterior,Interior
View ProductView ProductView ProductView Product

Specifications

Dimensions

Screw Length
6 in
Thread Pitch
0.00

Details

Color Family
Steel
Drive Style
External Hex
Fastener Plating
Hot Galvanized
Fastener Type
Wood Screw
Fastener/Connector Material
Steel
Features
ACQ Rated,Coated,Self Drilling,Self Tapping,Tamper Resistant
Finish
Hot-Dip Galvanized
Finish Family
Zinc
Head Style
Hex
Included
Driver Bit
Interior/Exterior
Exterior,Interior
Materials Fastened
Wood to Wood
Measurement Standard
SAE
Package Quantity
1
Product Weight (lb.)
0.12
Returnable
180-Day
Size
#0

Warranty / Certifications

Manufacturer Warranty
Limited Warranty

Questions & Answers

3Questions3Answers

To be 100% clear, should I use a 1/2" drill bit to install these? Description just says 1/2" drill.

Asked by rambutan2000 April 16, 2020
1
Answer

No, the 1/2" drill reference is not to a bit. (Note: these screws have the SawTooth point design for fast starts and no predrilling.) Drills are typically available in 1/4-inch, 3/8-inch and 1/2-inch sizes. The measurement refers to the size of the drill chuck — the part that holds the bit — and indicates the maximum-diameter bit shank that fits the drill. A 1/4-inch chuck is sufficient for a light-duty driver. A 3/8-inch drill is common for work around the home and accepts a wide range of bits. A 1/2-inch drill handles heavier applications. Thank you!

Can i drive this through a 6" post with my regular battery drill? Wish i could see a closeup of t...

Asked by toots February 25, 2020
1
Answer

The SDWH Timber-Hex HDG screw has a SawTooth™ point and oversized integral washer that makes for fast installations; no predrilling or separate washer needed. For best results, it is recommended to use a minimum of 1/2" low-speed corded drill to install. However, I did speak to one of the engineers involved with testing of this product and he says it depends on the model of the drill, but they install these with battery powered drills often without problems. Thank you!

is that for 1 screw?

Asked by tamalam April 18, 2020
1
Answer

Yes, it is for one screw.

Customer Reviews

  • 21 Customer Reviews
  • 4.6 out of 5 stars overall
90% of customers recommended.
Overall Ratings
5star-icon(15)
4star-icon(4)
3star-icon(1)
2star-icon(0)
1star-icon(1)
Sort By:
I had some 2" x 8" pieces of cedar that I was joining together to make a 24" x 36" slab of cedar....
Quality :
1
Value :
1
I had some 2" x 8" pieces of cedar that I was joining together to make a 24" x 36" slab of cedar. These screws were being used to hold them together along with the use of 5/8" dowels and industrial strength glue. I only had to use 4 of them but on 2 of them the heads rounded off when trying to screw them in. I was using a 1/4" drive 3/8" top quality socket connected to my electric drill. I had drilled a 1" diameter countersunk hole along with a pilot hole so the screw didn't have to do much work getting screwed in. The heads rounded off about halfway through screwing them through the pilot holes. This was before they had to do any real work of screwing through the raw wood. Cedar is not a hard wood and this should not have happened. I had a tough time getting them back out so I could try another screw. A 50% failure rate is not very good. DON'T BUY THESE UNLESS YOU WANT TO SPEND EXTRA TIME AND MONEY!
Was this helpful?
1
0
I have used a few hundred of these screws, and I think they are great. Compared to Lag bolts, thi...
I have used a few hundred of these screws, and I think they are great. Compared to Lag bolts, this cuts labor by a third ( no two-step hole drilling). I use a 1/2" electric impact, and have never stripped a head or broken a bolt. The big washer head is very helpful and makes it easy to apply sealant @ clearance hole.They are rated, unlike lag bolts, which makes them easier to use in drawings and getting through planning. Really very happy with this product. Would love to see and even thicker bolt with same self drilling head.
Was this helpful?
1
0
would purchase again
would purchase again
Was this helpful?
0
0
The screw did it's job
The screw did it's job
Was this helpful?
0
0
The Screw was as advertised.
The Screw was as advertised.
Was this helpful?
0
0
Was this helpful?
0
0
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
Was this helpful?
0
0
Great quality product...
Great quality product
Was this helpful?
0
0
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
Was this helpful?
0
0
Spotted with rust....
Spotted with rust.
Was this helpful?
0
0
Review this Product
Share your thoughts with other customers