Store SKU #
A: Yes, it is for one screw.
A: No, the 1/2" drill reference is not to a bit. (Note: these screws have the SawTooth point design for fast starts and no predrilling.) Drills are typically available in 1/4-inch, 3/8-inch and 1/2-inch sizes. The measurement refers to the size of the drill chuck — the part that holds the bit — and indicates the maximum-diameter bit shank that fits the drill. A 1/4-inch chuck is sufficient for a light-duty driver. A 3/8-inch drill is common for work around the home and accepts a wide range of bits. A 1/2-inch drill handles heavier applications. Thank you!
A: The SDWH Timber-Hex HDG screw has a SawTooth™ point and oversized integral washer that makes for fast installations; no predrilling or separate washer needed. For best results, it is recommended to use a minimum of 1/2" low-speed corded drill to install. However, I did speak to one of the engineers involved with testing of this product and he says it depends on the model of the drill, but they install these with battery powered drills often without problems. Thank you!
|Brand||Simpson Strong-Tie||Simpson Strong-Tie||Simpson Strong-Tie||Phillips|
|Name||0.276 in. x 6 in. Strong-Drive SDWH Timber-Hex Type 316 Stainless Steel Wood Screw||0.276 in. x 8 in. Strong-Drive SDWH Timber-Hex HDG Wood Screw||0.276 in. x 10 in. Strong-Drive SDWH Timber-Hex HDG Wood Screw||#10 4 in. Phillips-Square Flat-Head Wood Screws (75-Pack)|
|Screw Length||6 in||8 in||10 in||4 in|
|Drive Style||External Hex||External Hex||External Hex||Phillips-Square|
|Head Style||Hex||Hex||Hex||Flat Head|
|Fastener/Connector Material||Stainless Steel||Steel||Steel||Steel|
|Features||ACQ Rated,Self Drilling,Self Tapping,Tamper Resistant||ACQ Rated,Coated,Self Drilling,Self Tapping,Tamper Resistant||ACQ Rated,Coated,Self Drilling,Self Tapping,Tamper Resistant||Self Drilling,Self Tapping|
|View Product||View Product||View Product||View Product|