|Fastener Head Width (in.)||.313 in||Fastener Length (in.)||1.5 in|
|Nail Length (In.)||1 1/2 in.|
|Color Family||Steel||Fastener Callout Size||8d|
|Fastener Material||Carbon Steel||Fastener Type||Non-Collated Wood Joiner Nail|
|Features||ACQ Rated||Finish||Hot-Dip Galvanized, Class D|
|Finish Family||Galvanized||Included||No Additional Items Included|
|Interior/Exterior||Exterior, Interior||Nail Coating||Hot Galvanized|
|Nail Type||Wood Joiner Nail||Package Quantity||750|
|Product Weight (lb.)||5.83 lb||Returnable||90-Day|
|Shank Type||Smooth Shank|
|Manufacturer Warranty||Limited Warranty|
A: The specified fasteners for the products noted are as follows: EPC6Z - 0.148" x 3" (*10d), GA1 and GA2 - 0.148" x 1 1/2" (10d) or SD#9x1 1/2 structural connector screw, HU28-2 - 0.162" x 3 1/2" (16d) to the header and 0.148" x 3" (10d) to the joist, MSTA18 - 0.148" x 2 1/2" (*10d) or SD#9x1 1/2 screw. *Note: the nails referenced in your inquiry are 1 1/2" long - be sure the correct nail length is used as listed. Thank you!
A: Yes they could be, but these nails are designed for shear strength and are more expensive than regular common galvanized nails, which are suitable for Hardi Siding. Just ensure you thoroughly read the installation guidelines for nailing patterns and depth.
A: Suggest ring shank
A: After reviewing the manufactures general installation instructions, I would think that these nails would meet the requirements for this application.