#1 Home Improvement Retailer

Internet # 300716359

Model # HEPD50

Store SKU # 1002334396

Store SO SKU #1002210021

50 kA Universal Whole Home Surge Protection Device HEPD50

$98.10
Apply Now
Pay $73.10 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Square D whole home surge protection device rated for 50kA
  • Easy to install - mounts next to any residential load center
  • 3-year warranty - $50,000 downstream equipment protection
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy

Product Details

About This Product

Protect your electronics from damage with this Square D Brand Home Electronics Protective Device (HEPD). This affordable and compact surge suppressor is compatible with all brands of residential load centers. It works together with surge protection plug strips to suppress power surges for sensitive electronics. This HEPD reduces surges that could overwhelm plug strips and cause damage to connected household equipment. It also provides surge suppression for important items such as refrigerators, washers, dryers, stoves and air conditioning that regular plug strips cannot or may not protect.

Highlights

Product Information

Internet # 300716359

Model # HEPD50

Store SKU # 1002334396

Store SO SKU #1002210021

Specifications

Dimensions: H 3.23 in, W 3.72 in, D 2.10 in

Dimensions

Product Depth (in.)

2.10 in

Product Height (in.)

3.23 in

Product Width (in.)

3.72 in

Details

Connection type

Panel Mount

Electrical Product Type

Whole House Surge Protectors

Joules

2350

Maximum Amperage (A)

50000

Product Weight (lb.)

0.87 lb

Returnable

90-Day

Warranty / Certifications

Certifications and Listings

ANSI Certified, UL Listed

Manufacturer Warranty

3-year, 50, 000 connected equipment

Questions & Answers

157Questions
caret
Q:can i use this SPD for electrical panel (Cutter-Hammer)? thanks
by|Jun 2, 2024
1 Answer
Answer This Question

A:  Hi Tesla, Our HEPD80 is compatible to all brands of load center. Just make sure that this is used in a 240/120Vac panel. Warm regards. Schneider Electric Customer Care

by|Jun 4, 2024
    caret
    Q:how do i decide which amperage to choose from?
    by|May 21, 2024
    1 Answer
    Answer This Question

    A:  Hello Charlie, There are three different HEPDs you can select on, it differs on the downstream connected household equipment coverage and the duration of warranty. HEPD25/HEPD25C $30,000 3 yrs HEPD50/HEPD50C $50,000 3 yrs HEPD80/HEPD80C $75,000 5 yrs All HEPD will protect your panel from surges, you may choose any of those three. Warm regards. Schneider Electric Customer Care

    by|May 24, 2024
      caret
      Q:I live in Boynton Beach FL in 1 family house (2,000 SF). What amperage is necessary for surge protection and what device would you recommend?
      by|May 14, 2024
      1 Answer
      Answer This Question

      A:  Hi LevB, HEPD25 would already provide Surge Protection for whole household. If Best protection is needed we recommend HEPD80. Warm regards. Schneider Electric Customer Care

      by|May 15, 2024
        caret
        Q:Is this type 1 or 2 is is it considered both. I ask because type 2 is required at all panels downstream as well.
        by|May 3, 2024
        1 Answer
        Answer This Question

        A:  Hi Aaron, HEPD80 is considered as Type 1 SPD. SPDs investigated for Type 1 applications are automatically suitable for Type 2 applications and may be marked for SPD Type 1 and/or Type 2 applications. "SPD Type 2" are not suitable for Type 1 applications. Warm regards. Schneider Electric Customer Care

        by|May 8, 2024
          Showing 1-4 of 157

          Customer Reviews

          4.8 out of 5

          • 4.8 out of 324 reviews
          • 97% recommend this product
          Filter by:
          Showing 1-10 of 324 reviews
          I got an electrician install this surge protector on the wall. He installed it right under the electrical panel. He also placed a outlet cover around it to hide the gaps created during the mounting. (I am not able to add image for some reason.)
          by
          • Verified Purchase
          Works to dampen laser printer surges
          Installed inside cabinet with 2 sided tape to hide ugly box & to keep wires short as possible. Used 2 single pole 20A breakers. No issues with instl. I know its working as now when we run are laser printer the lights don't flicker. The light is very bright & that's all I need to see!
          by
            • Recommended
            Easy to install HEPD50
            Recently added a HEPD50 surge protector and used two adjacent 120v breakers then marked wires for ease of replacement if need be. Was a rather easy job. Used wire insulation and a red marker to mark wires (see photo). Also used flush mount kit. Got both on sale.
            by
              • Recommended
              I had two service panels replaced and rather than paying the electrician around $600 each to inst...
              I had two service panels replaced and rather than paying the electrician around $600 each to install a whole house surge suppressor, I decided to buy and install them myself saving about $1000. The install was fairly easy by just following the instructions and took around an hour each. I also did the same for a neighbor. Highly recommend.
              by
              • DIY
              • Verified Purchase
              • Recommended
              1 found this review helpful
              So far so good. Product like this proves itself on demand and that demand, luckily, has not been ...
              So far so good. Product like this proves itself on demand and that demand, luckily, has not been there yet. But, we are so much more comfortable with these surge protectors installed. Brown outs during storms in our neighborhood always threatened electronics. So, we installed individual surge protected plugs on expensive appliances. Now that we have installed this whole house surge protector we have the whole place protected, even the breaker box in the garage now has one! The electrician was so impressed with these surge protectors, he headed to Home Depot to get them for his household. I would say that says a lot.
              by
              • Verified Purchase
              • Recommended
              Fits perfectly flush against the wall in a surface mounted Square D QO panel standard 1/2" knocko...
              Fits perfectly flush against the wall in a surface mounted Square D QO panel standard 1/2" knockout. See Schneider's 8291-0202 Rev. 08, 04/2020 for warranty terms.
              by
              • Verified Purchase
              • Recommended
              2 found this review helpful
              Straight forward and easy to install. Does not take up space in the CB panel.
              Straight forward and easy to install. Does not take up space in the CB panel.
              by
              • Verified Purchase
              • Recommended
              Just a update on the HEPD installed Feb 2016. The large tree in front of our house took a lighten...
              Just a update on the HEPD installed Feb 2016. The large tree in front of our house took a lightening hit 8/8/18 which split the tree down the center. So far, all our electronics have checked our, the only thing that happened was a GFI tripped in the room where the hot tub is. I contacted my insurance company and they requested than I check out garage door openers and stuff all appears to be working
              by
                • Recommended
                3 found this review helpful
                Basically a Square D safety blanket for the whole house! Had this HEPD80 installed during my rece...
                Basically a Square D safety blanket for the whole house! Had this HEPD80 installed during my recent panel upgrade which is the perfect time for correct placement. Installed at the top spot of the panel on a dedicated 20A 2-pole breaker (QO220CP) as recommended. It lights up and looks great..fingers crossed it saves the day if I ever need it.
                by
                  • Recommended
                  1 found this review helpful
                  This is a great product. It took 15 minutes to...
                  This is a great product. It took 15 minutes to install to a 2 pole 20A breaker.I recently bought an Electric Car and was concerned about surges damaging the battery. Apparently, 80% of surges come from inside the house. I didn't want the car surging on non-surge protected household appliances.
                  by
                  • Verified Purchase
                  1 found this review helpful
                  Showing 1-10 of 324 reviews

                  Compare Similar Items

                  current item

                  Joules

                  2350

                  930

                  3300

                  0

                  Maximum Amperage (A)

                  50000

                  25000 A

                  80000

                  0

                  Connection type

                  Panel Mount

                  Breaker

                  Panel Mount

                  Panel Mount

                  Electrical Product Type

                  Whole House Surge Protectors

                  Whole House Surge Protectors

                  Whole House Surge Protectors

                  Whole House Surge Protectors