Internet #204836369

Model #HOM3060M200PCVP

Store SKU #1000040129

Store SO SKU #1000113540

Homeline 200 Amp 30-Space 60-Circuit Indoor Main Breaker Plug-On Neutral Load Center with Cover - Value Pack

  • Less wiring, clean gutter, fast installation with Plug-On Neutral
  • Compatible with any Square D Homeline circuit breaker
  • Homeline breakers, cover, and aluminum bus bar included
  • See More Details

Frequently Bought Together

+
+
Price:
$12573

Product Overview

Designed for the value-minded contractor, remodeler or homeowner is this Square D by Schneider Electric Homeline Value Pack 200 Amp 30-Space 60-Circuit Indoor Convertible Main Breaker Load Center. It is built with a plated, aluminum bus bar that is listed only for Homeline circuit breakers. They are engineered for fast installation and wire savings. Also UL listed for residential and commercial power distribution, this breaker is fully distributed.
  • California residents
  • Includes a fully distributed neutral bar, allowing for the installation of Homeline plug-on neutral combination arc fault breakers on any space
  • Each pole space accepts full-size, tandem or quad breakers
  • Ground and neutral bars accept up to (3) #10-14 equipment grounds
  • Includes (3) HOM120 Homeline 20 Amp single-pole circuit breakers, (2) HOM230 Homeline 30 Amp double-pole circuit breakers and a combination flush/surface cover
  • Accommodates plug-on secondary surge arrestor (sold separately)
  • Overhead/underground feed simply by rotating the device before installing
  • Single phase
  • Rated 120/240 VAC and 22,000 AIR short circuit current rating
  • Automatic flush adjusting cover requires less time to complete the job
  • Designed with straight-in mains to save expensive cable and time
  • Distributed split branch neutral with terminal screws backed out offering up to 50% more terminals than UL requires; increases wiring flexibility, saves installation time and simplifies wiring
  • Thermoplastic interior assembly is among the most rugged in the industry
  • Slot/square drive screws let you use either standard flat blade screwdriver or square-head driver for positive drive and proper torque
  • For protection from damage or theft on the job site, interiors can be easily removed with a single captive screw
  • 3-ground bar mounting locations (left, right and end) let you pick the easiest spot to wire
  • Learn More About Electrical Panels Here in our Buying Guide.



  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Main Breaker Box Kits

Homeline 100 Amp 20-Space 40-Circuit Indoor Main Breaker Plug-On Neutral Load Center with Cover - Value Pack
current product
Homeline 200 Amp 30-Space 60-Circuit Indoor Main Breaker Plug-On Neutral Load Center with Cover - Value Pack
Homeline 200 Amp 40-Space 80-Circuit Indoor Main Breaker Plug-On Neutral Load Center with Cover - Value PackQO 200 Amp 2-Pole Outdoor Circuit Breaker Enclosure with QOM2200VH Breaker
BrandSquare DSquare DSquare DSquare D
NameHomeline 100 Amp 20-Space 40-Circuit Indoor Main Breaker Plug-On Neutral Load Center with Cover - Value PackHomeline 200 Amp 30-Space 60-Circuit Indoor Main Breaker Plug-On Neutral Load Center with Cover - Value PackHomeline 200 Amp 40-Space 80-Circuit Indoor Main Breaker Plug-On Neutral Load Center with Cover - Value PackQO 200 Amp 2-Pole Outdoor Circuit Breaker Enclosure with QOM2200VH Breaker
Price
$7274
$12573
$13900
$13905
Ratings
(355)
(355)
(355)
(49)
Indoor/OutdoorIndoorIndoorIndoorOutdoor
Number of Spaces2030400
Number of Circuits4060801
Maximum Amperage (amps)100200200200
Mounting TypePlug-On NeutralPlug-On NeutralPlug-On NeutralBolt On
Load center height (in.)20.9233.7839.3716.18
Load center depth (in.)3.753.753.754.12
Load center width (in.)14.2514.2514.256.92
Electrical Product TypeLoad Center and Breaker KitLoad Center and Breaker KitLoad Center and Breaker KitLoad Center and Breaker Kit
View ProductView ProductView ProductView Product

Specifications

Dimensions

Load center depth (in.)
3.75
Load center height (in.)
33.78
Load center width (in.)
14.25

Details

Electrical Product Type
Load Center and Breaker Kit
Indoor/Outdoor
Indoor
Load Center Mounting Type
Flush,Surface
Load Center Type
Main Breaker
Maximum Amperage (amps)
200
Mounting Type
Plug-On Neutral
Number of Circuits
60
Number of Spaces
30
Phase Type
1 Phase
Product Weight (lb.)
34.83
Returnable
180-Day
Voltage (volts)
120/240

Warranty / Certifications

Certifications and Listings
UL Listed
Manufacturer Warranty
Square D warrants its single phase load centers, in a residential application, to be free from defects in material and workmanship under normal care and proper usage for a period of 10 years from the date of installation for HOMELINE load centers when used with the appropriate Square D HOMELINE branch circuit breakers.

Questions & Answers

256Questions80Answers

This will be a sub panel in a detached workshop. I plan to use 2-2-2-4 Aluminum Mobile Home Feede...

Asked by cuulblu November 10, 2018
10
Answers

Yes, the 100 amp main breaker will accept #2 conductors.

Is the main disconnect included?

Asked by Rambo November 21, 2018
10
Answers

Yes, the 200 amp main breaker is factory installed.

does the panel come with a neutral bar and a grounding bar?

Asked by Eric December 29, 2017
9
Answers

No ground bar is included, purchase it separately.

What random breakers can I use? I have tried to install one and unable to make it connect.

Asked by Howbrow October 8, 2018
8
Answers

Use just about any Homeline breaker. No other breakers from other manufacturers are UL Listed for this panel.

My main breaker panel does not have the neutral screw bars to attach my neutral wires. How do I get them?

Asked by ScottD January 27, 2019
8
Answers

This panel has two neutral bus bars for both plug-on neutrals and for screw terminal neutrals. It's ground bars that must be purchased separately.

Can I remove main breaker and feed with a smaller breaker 50 amp-70 amp.

Asked by CrackedUp March 26, 2018
7
Answers

Yes, you still have to install a 50 -70 amp breaker as a main disconnect. I believe that panel is available without a Main installed.

can I turn that breaker box upside down and feed into the bottom into the main disconnect breaker and have the other Bre

Asked by Steve September 16, 2018
7
Answers

Yes, this panel is approved to be inverted for bottom feed applications.

What does it mean 40-space 80-circuit indoor main braker

Asked by Doug October 6, 2018
7
Answers

This panel has 40 spaces and will accept 40 full sized 1" breakers or 40 tandem 1" breakers for a total of 80 circuits. Indoor means this is a NEMA 1 panel suitable to be installed indoors. Main breaker means the 200 amp main breaker is factory installed.

Is it possible to use this panel as a sub panel?

Asked by bgode90 September 23, 2018
7
Answers

Yes, this panel can be installed as a subpanel. You'll need a 4-wire feed and will also need to purchase a ground bar kit separately. Do not install the green neutral bonding screw, the neutral must be isolated from the grounded panel box. If the garage is detached you will also need to install at least one ground rod connected to the ground bar with #6 copper Grounding Electrode Conductor.

Am I able to mount the main breaker and bus bars in an older General Switch Company panel box?

Asked by Alan February 9, 2019
7
Answers

Possibly, but generally only skilled electricians should attempt to do so.

Homeline 200 Amp 30-Space 60-Circuit Indoor Main Breaker Plug-On Neutral Load Center with Cover - Value Pack - page 2

Customer Reviews

  • 355 Customer Reviews
  • 4.7 out of 5 stars overall
93% of customers recommended.
Overall Ratings
5star-icon(269)
4star-icon(60)
3star-icon(9)
2star-icon(6)
1star-icon(11)
Sort By:
excellent quality, easy set up
excellent quality, easy set up
Was this helpful?
1
0
Great price. Upgraded from 30 to 40 breaker worked great
Great price. Upgraded from 30 to 40 breaker worked great
Was this helpful?
3
0
Pretty much the Only Residential panel I rock with SQ D!!!
Pretty much the Only Residential panel I rock with SQ D!!!
Was this helpful?
1
0
Everything was as advertised. Good quality build. Included breakers is a bonus. Would definately ...
Everything was as advertised. Good quality build. Included breakers is a bonus. Would definately recomend.
Was this helpful?
2
0
Great product at a fair price!
Great product at a fair price!
Was this helpful?
1
0
Bouth this to replace a 20 space/40 circuit panel in an older home i bought last year. The panel...
Bouth this to replace a 20 space/40 circuit panel in an older home i bought last year. The panel only had one space left and was mostly filled with tandem breakers. It was time for an upgrade. My electrical back ground is non existant other than running a couple outlets in the house. But im willing to try just about any project. I was worried about the panel not having a ground bar like others had mentioned initially. However, after talking to the homedepot electronics guy, realized i didn't need it. I have another 200amp breaker at the pole outside. its grounded there and i have 3 wires comming into my house into my 200amp indoor panel. Two hot and one neutral. So all of the grounds and neutral wires from the breakers go on the same bar. Granted my old box was wired like this, i just wanted to make sure no corners were cut. I found that this box had a much better layout than the one i replaced, really easy to work in. The only negative i would have to say, is that the 1/2" knockouts in the top seem too close together when working with the wire clamp fittings. But with a little finess, i was able to make it work. Total time was 8 hours start to finish (not including the 35 min one way trip back to homedepot for the stuff i forgot...fail). Im sure someone who knows what they are doing can do it faster and prettier, but thought it looked good for a rookie.
Was this helpful?
10
0
Panel lock outs were hard as heck to knock out....
Panel lock outs were hard as heck to knock out. Had to drill them and buy a knockout punch. Defeated the pourpose. And that was with each panel as I bought 2! I had to pound out the holes and it bend the panel. Then I had to drill holes next to each of the pre cut/solid metal in order to knock them out with a step bit. I saved -$54 per panel as I had to go buy a knockout kit and several unibits and drill bits. My video won’t post
Was this helpful?
2
0
Response from SchneiderCustomerCareJanuary 15, 2018
We are sorry to hear about your frustrating experience with the Homeline loadcenter. Your feedback is appreciated though as we have shared the feedback provided here with our engineering department to investigate.
If you have further questions or concerns please reach out to our customer care center technical support at 888-778-2733 Opt 2 for Tech.

Schneider Electric Customer Care SquareD
Exactly as described and pictured. Great Product at a Great Price.
Exactly as described and pictured. Great Product at a Great Price.
Was this helpful?
3
0
Great Panel, easy to install
Quality :
5
Value :
5
Swapped out a fuse panel for the breaker, insurance requireded it, or pay $350 more per year. Four hours and about $110 in cost, less than 1 year payback.
Was this helpful?
3
0
Was this helpful?
0
0
Review this Product
Share your thoughts with other customers