#1 Home Improvement Retailer

Internet # 204609991

Model # 91330

1/3 HP Submersible Thermoplastic Utility Pump

$73.66
/box
Apply Now
Pay $48.66 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • 1/3 HP thermoplastic pump with 2400 GPH flow rate
  • Will pump up tp 25 ft. of vertical height
  • Handles solids up to 1/8"
  • View More Details
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details

About This Product

The Superior Pump 1/3 HP Submersible Thermoplastic Utility Pump offers exceptional power in a small, durable frame. Able to pump 40 Gal. a minute up to 25 ft. of vertical height, this Fully Submersible pump can easily fit inside a 6 in. opening. Designed to drain standing water from any environment, the 91330 is ideal for flooded basements, farm use, draining standing water from swimming pools, fountains, flooded basements, typical residential or commercial water transfer applications, and will pump down to a 1/2 in. The 91330 features a continuous-duty, split capacitor motor for optimal performance. Thermally protected, the high-efficiency, 4.1 Amp, 1/3 HP motor delivers the power necessary for any tough job. Durable thermoplastic construction ensures this submersible pump can be used time and again without corroding. Water intakes on the side and bottom of the pump allow for continuous pumping with clog-resistant suction. The pump features a 10 ft., replaceable, waterproof power cord and is equipped with a large 1-1/4 in. male iron pipe discharge thread for high capacity pumping. A 3/4 in. garden hose adapter is also included. UL/CUL listed and CSA certified and backed by a one-year limited warranty. An optional float switch (sold separately) can be added to allow this model to be used as a sump pump.

Highlights

Product Information

Internet # 204609991

Model # 91330

Specifications

Dimensions: H 10.75 in, W 5.375 in, D 5.875 in

Dimensions

Product Depth (in.)

5.875 in

Product Height (in.)

10.75 in

Product Width (in.)

5.375 in

Details

Amperage (A)

4.1

Cord Length (ft.)

10

Discharge Flow @ 0 ft. (gallons/hour)

1680

Discharge Flow @ 0 ft. (gallons/min)

28

Discharge Flow @ 10 ft. (gallons/hour)

1680

Discharge Flow @ 10 ft. (gallons/min)

28

Features

Bottom/End Suction, No Additional Features, Portable, Self-Priming, Submersible, Thermal Overload Protection

Head Pressure (ft.)

25

Housing Material

Thermoplastic

Impeller Material

Thermoplastic

Included

No Additional Items Included

Maximum Discharge Flow (gallons/hour)

2400

Maximum Horsepower (hp)

1/3

Maximum Pressure (PSI)

10

Maximum Working Temperature (F)

120

Minimum working temperature (F)

32

Outlet Connection

Threaded male

Pack Size

1

Power Type Required

AC

Product Weight (lb.)

7.8 lb

Pump Switch Type

Switchless

Returnable

90-Day

Vertical Lift (ft.)

25

Voltage

120v

Warranty / Certifications

Certifications and Listings

CSA Listed, UL Listed

Manufacturer Warranty

1 year limited

Questions & Answers

297Questions
caret
Q:Why is the model with the least HP (1/5) the most expensive? Shouldn't it be the cheapest of the three?
by|Mar 28, 2024
1 Answer
Answer This Question

A:  Hi Jason, thank you for taking the time to submit your question. There are many variables that go into deciding the cost of an item, though horsepower is a consideration when determining the cost, it is not the only factor. If you have any further questions, please feel free to reach out to our customer service team at 800-495-9278. We are available 7 days a week and would be happy to help!

by|Mar 29, 2024
    caret
    Q:Is there an off and on switch?
    by|Mar 25, 2024
    1 Answer
    Answer This Question

    A:  Hi Marilyn, No. This is a utility pump, it is on when plugged in and off when unplugged. A float switch can be added or look for a Sump Pump, It will have a switch. Thanks

    by|Mar 25, 2024
      caret
      Q:What is the maximum PSI on this pump? Thanks
      by|Mar 17, 2024
      1 Answer
      Answer This Question

      A:  Hi Kathy, The max PSI this pump will develope is 10.8 Thanks

      by|Mar 18, 2024
        caret
        Q:Can this pump be used in a tank with a pressure washer? if yes, is there a limit?
        by|Mar 13, 2024
        1 Answer
        Answer This Question

        A:  Hello, thank you for reaching out! This pump would not be a good fit for a pressure washer as it does not create a lot of PSI when operating. Also, it does not include a pressure switch, so you risk damaging the pump. If you would like to discuss your application further, please call our customer service team at 1-800-495-9278. Thank you!

        by|Mar 14, 2024
          Showing 1-4 of 297

          Customer Reviews

          4.7 out of 5

          • 4.7 out of 1,675 reviews
          • 94% recommend this product
          Filter by:
          Showing 1-10 of 1,675 reviews
          Excellent pump for flushing a hot water heater
          I purchased this product to flush my tankless hot water heater annually. To use it for this purpose, buy a set of washer hoses, connect a hose to the pump nozzle and the other end to the hot water heater cold water service input valve. Place the pump in a 5 gallon bucket of white vinegar. Connect the second hose to the hot water heater hot output service valve and the other end loose into the 5 gallon bucket. Verify with Youtube videos you have the correct setup before starting the process.
          by
            • Recommended
            7 found this review helpful
            Pump works as promised and is a good value. It pumps A/C condensate collection water up 10 feet t...
            Pump works as promised and is a good value. It pumps A/C condensate collection water up 10 feet to a small garden. It's only been in service for a couple weeks though.
            by
            • Verified Purchase
            • Recommended
            This pump did what I needed it to do. I submerged it into water I didn’t want to even touch, plug...
            This pump did what I needed it to do. I submerged it into water I didn’t want to even touch, plugged it in, and it drained my pool/swamp of about 40k gallons without stopping. It had to pump water/pool sludge up from the deep end of the pool “8-10ft” and down a 300ft. hose. I cleaned it out, drained and stored it for next time. Job well done!
            by
            • Verified Purchase
            • Recommended
            6 found this review helpful
            bought this pump for my fountain.
            bought this pump for my fountain.
            by
            • Verified Purchase
            • Recommended
            1 found this review helpful
            Used the pump with 5 gallon Homer bucket , two wading machine hoses and a GFCI adapter to flush a...
            Used the pump with 5 gallon Homer bucket , two wading machine hoses and a GFCI adapter to flush and clean our on demand water heater (a Navien). Used with white vinegar and worked well. By piecing together this “kit” saved over 40% compared to buying a ready assembled kit, and for about $100- much less than what local Plumber/HVAC charges. Easy to do, with great how-to demos on youtube. Flush pump out with clean water at end , and store it all in the bucket ready for the next clean out! Only gave it a 4 because ad and documents should more strongly emphasize need to use a GFCI for safety.
            by
            • Verified Purchase
            • Recommended
            7 found this review helpful
            Bought to pump out my pool and worked exactly as I hoped it would at 1/2 the price of the other s...
            Bought to pump out my pool and worked exactly as I hoped it would at 1/2 the price of the other stores price.5 stars
            by
            • Verified Purchase
            • Recommended
            2 found this review helpful
            In the few days we have had this pump, it has performed its job as expected. We purchased this p...
            In the few days we have had this pump, it has performed its job as expected. We purchased this pump to replace an old one in a Port-a-Cool fan. This product is easy to use, and comes out of the box ready.
            by
            • Verified Purchase
            • Recommended
            2 found this review helpful
            Fine quality product, purchased online, as what was in the store did not meet my needs. I use thi...
            Fine quality product, purchased online, as what was in the store did not meet my needs. I use this to back flush vinegar thru my Noritz Gas Tankless water heater. It has the power and durability to do a great job and fits easily in my 5 gallon bucket that I use for this procedure. Small enough to store easily when not in use
            by
            • Verified Purchase
            • Recommended
            2 found this review helpful
            I bought this pump for a water feature. I set in in a 169 gallon, galvanized, oval cattle water ...
            I bought this pump for a water feature. I set in in a 169 gallon, galvanized, oval cattle water trough. The water is pumped up to my gutter through a garden hose remnant and then flows to downspout which I replaced with 3 inch pvc pipe which I attached horizontally to house. The water shoots out end of pvc into trough and when pump is plugged in it simply circulates. I think it's cool. I sit in garage just a few feet from trough and enjoy the sound and looks of the flowing water.
            by
            • Verified Purchase
            • Recommended
            8 found this review helpful
            A good pump for small projects
            This is a perfect pump for smaller projects. I use this for draining small spas. I also use it for descaling my tankless water heater. The 10 foot cord (really 9.5 feet) is plenty long for small pumping projects and you can clean the bottom screen by removing 3 stainless steel screws. It includes a carry handle, and an anti-airlock hole. It has the garden hose adapter so you just connect the hose and go. I used it on a 100 foot hose and it worked fine. It also allows up to 1-1/4 NPT discharge. For medium or large projects, step up to the 1/2 HP. Also I find that anything over 6 foot deep, you lose a lot of pumping performance, so for deeper waters, go to the 1/2 HP.
            by
            • Recommended
            13 found this review helpful
            Showing 1-10 of 1,675 reviews

            Compare Similar Items

            current item

            Discharge Flow @ 0 ft. (gallons/hour)

            1680

            2110

            1800

            1250

            Housing Material

            Thermoplastic

            Thermoplastic

            Thermoplastic

            Thermoplastic

            Voltage

            120v

            115v

            115v

            120v

            Impeller Material

            Thermoplastic

            THERMOPLASTIC

            Thermoplastic

            Thermoplastic