#1 Home Improvement Retailer

Internet #206024071

Model #21381

Store SKU #1001412253

#10 x 1-7/16 in. Phillips Round Head Screw with Wings (300-Pack)

$2997
Apply Now
Pay $4.97 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Secure fastening without the need to pre-drill
  • No tool slippage or cam-outs
  • Drill, tap and fasten in one motion
Store
0 in stock
Text to Me
How to Get It

Frequently Bought Together

Top Rated
+
+
Price:
$2997

Product Overview

Teks #10 x 1-7/16 in. Phillips Wood-to-Metal Self-Tapping Screws with Wings (300-Pack) help you secure wood to metal without pre-drilling. The #10 Wood-to-Metal screw is ideal for use with 1/8 in. to 16-Gauge steel. Special wings ream a hole in the wood to prevent thread engagement during drilling. The wings break away when self-tapping into metal. Providing a secure hold. Installs with a standard screw gun and a #2 Phillips bit. No pre-drilling required. Ideal for fastening applications such as wood headers and plywood to steel frames.
  • Secure wood to metal (1/8 in. to 16-Gauge) without pre-drilling
  • Precision point with wings designed to drill, tap and fasten all in 1 motion
  • Climacoat premium coating provides a long-life finish for exterior applications
  • High performance drive surfaces reduce cam-outs to penetrate surface the first time for easy installation
  • Wings ream a hole in the wood to prevent thread engagement and break away when self-tapping into metal
  • No pre-drilling necessary
  • Common project applications: electronics, license plates, electrical boxes, switch plates, furniture

Additional Resources

From the Manufacturer

Compare Similar Self-Drilling Screws

current product
Top Rated#10 x 1-7/16 in. Phillips Round Head Screw with Wings (300-Pack)
#10-16 x 3/4 in. External Hex Washer Head Drill Point Screw (450-Pack)#14 x 2-1/2 in. External Hex-Washer Head Drill-Point Screw (120-Pack)#12 x 2-1/2 in. Phillips Flat-Head Self-Drilling Screws (5 lbs. Pack)
BrandTeksTeksTeksPro-Twist
Name#10 x 1-7/16 in. Phillips Round Head Screw with Wings (300-Pack)#10-16 x 3/4 in. External Hex Washer Head Drill Point Screw (450-Pack)#14 x 2-1/2 in. External Hex-Washer Head Drill-Point Screw (120-Pack)#12 x 2-1/2 in. Phillips Flat-Head Self-Drilling Screws (5 lbs. Pack)
Price
$2997
$3187
$3187
$3298
Ratings
(486)
(1517)
(1517)
(6)
Screw Length1-7/16 in3/4 in2-1/2 in2-1/2 in
Size#10#10#14#12
Head StyleFlat HeadWasher HeadWasher HeadFlat Head
Drive StylePhillipsExternal HexExternal HexPhillips
Fastener/Connector MaterialSteelSteelSteelSteel
FeaturesACQ Rated,Coated,Self DrillingCoated,Self DrillingCoated,Self DrillingSelf Drilling
View ProductView ProductView ProductView Product

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 4.5
    out of 487 reviews
  • 87%recommend this product
Filter by:
Showing 1-10 of 487 reviews
Nothing wrong
Incredible product I give the whole 5 stars This paint is maid for profesional resolutions Swap from Sherwin Williams user of oil based to this it was very very worthy
by
  • Verified Purchase
2x6 floor planks to trailer
Did their job securing
by
  • Verified Purchase
  • Recommended
Still a Workout!
Went through 3/16” channel trailer frame, require good amount of force/body weight, (190lbs), pre drilling 2X8 PT lumber helps, IMO no time savings over drilling steel and using self tappers, benefit is cost savings and availability, still a lot of work.
by
    • Recommended
    they sucks
    I try to use them on my utility trailer to hold my 2x6 and I have to pre drill a hole to the wood to make them work.. also half of the screws must up half way when they drilling to the pre existing holethey come 40 on the box and more of the 20 mest up before they reach the head of the screws
    by
      Perfect for attaching 2x wood material to steel framing
      I used these self-drilling, self-tapping screws to replace the pressure-treated pine decking on my hauler. The hauler uses 3/16" thick steel for its frame. These screws are coated and rated for exposure to the chemicals in pressure-treated wood so they won't corrode as most fasteners do in that application. I used a cordless drill/driver to install the screws, and every screw worked perfectly, drilling first through the wood, then the steel, and then tapping its own threads in the steel. Couldn't be easier or simpler. And of course these screws are intended to also self-countersink, leaving a completely smooth finished surface which is necessary on a trailer deck.
      by
      • Verified Purchase
      • Recommended
      1 found this review helpful
      Great product so much easier than drilling through the metal to install bolts. I have used allot...
      Great product so much easier than drilling through the metal to install bolts. I have used allot of them for decking on several utility trailers never had any issues with them.
      by
      • Verified Purchase
      • Recommended
      Great product, I will buy it again....
      Great product, I will buy it again.
      by
      • Verified Purchase
      I needed to replace the decking on the 8' x 12' utility trailer I built some years back. I origi...
      I needed to replace the decking on the 8' x 12' utility trailer I built some years back. I originally used 3/4" plywood sheets stacked 2 thick for it but this time I used 2" x 8" treated lumber and needed something that would hold them down and still be easily removed in case a board got damaged. I was going to drill pilot holes and use screws but didn't think they would hold up to the stresses. Them I found these and it was PERFECT!!! They have a large head to support the boards and most important they were self tapping. My son and I attached all of them in less than 90 minutes and it is stronger than ever.
      by
      • Pro
      • Verified Purchase
      • Recommended
      1 found this review helpful
      This product worked perfectly for attaching wood fence pickets to 14 gauge structural steel tubin...
      This product worked perfectly for attaching wood fence pickets to 14 gauge structural steel tubing in a single step. The little wings bore a clearance hole through the wood and then break off as the screw drills/taps the steel. I was initially concerned that the phillips type drive would be a problem but the bit supplied with the screws fit the screw heads well with absolutely no slippage. This is a great product for attaching wood to steel!
      by
      • Verified Purchase
      • Recommended
      Awesome screw grab the wood and the metal seamlessly
      Awesome screw grab the wood and the metal seamlessly
      by
      • Verified Purchase
      • Recommended
      Showing 1-10 of 487 reviews