$11.97
- Teks Lath Phillips Head Screw for Secure Metal to Metal Fastening
- Teks Lath Self Tapping Self Drilling Metal to Metal Fastener
- For Use in HVAC, Stucco, Plaster and Steel Stud Metal Fastening
- View More Details
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details
Specifications
Questions & Answers
21Questions
Q:Is this the best screw for mounting light-duty (50 lb load across 6' shelves w/3 brackets/shelf) shelf brackets into 5/8 sheetrock with metal studs?
by|Dec 1, 2023
0 Answer
Q:Miter saw jig
by|Oct 11, 2023
0 Answer
Q:Can you use this on the plastic pieces on a greenhouse?
by|Mar 18, 2023
1 Answer
Q:Will these screws drill into metal studs then anchor into word?
by|Mar 11, 2023
1 Answer
Showing 1-4 of 21
5
716
4
143
3
25
2
19
1
33
Mar 23, 2022
Great time saver
Made quick work of my project. No pre-drilling needed. Held my studs securely
by
Mar 19, 2021
We were installing vinyl beaded soffit over sheetrock inside a restaurant as a wainscot. The scre...
We were installing vinyl beaded soffit over sheetrock inside a restaurant as a wainscot. The screes worked perfectly to hold everything secure!
by
Jun 28, 2020
Easy to work with, they look nice with the metal roof.
Easy to work with, they look nice with the metal roof.
by
Jun 16, 2020
Nice product
Nice product
by
Oct 15, 2019
Worked great for my project
Worked great for my project
by
Jan 29, 2019
it does what it's made to do! used it to make a flower bed and it turned out great. I like that t...
it does what it's made to do! used it to make a flower bed and it turned out great. I like that the head was a little wider so it didn't go all the way through the thinner corner peices.
by
May 15, 2018
I purchased these to attach foam insulation to a interior garage door. They worked extremely w...
I purchased these to attach foam insulation to a interior garage door. They worked extremely well, very sharp and penetrated the alum/steel easily with little effort. I am sure I will find a lot of other uses for this product.
by
May 8, 2018
Great Item, saved the day. I was installing chicken wire to use as a gutter guard to keep the l...
Great Item, saved the day. I was installing chicken wire to use as a gutter guard to keep the leaves from clogging the super gutter. see picture below. This had a wide enough head to grab it, make it's own hole and finally keep the chicken wire from coming up.
I just had to figure out how I can do this, and did it.
by
Sep 4, 2015
Excellent Zinc plated self tapping screws.
The Zinc-Plated Steel Truss-Head Phillips Drill-Point Lath Screws provide secure metal to metal fastening and strong holding power without the need to pre-drill. It can be installed with a standard screw gun and a #2 Phillips-drive bit or screw driver. It can also be used on wood, and looks beautiful and has secure fastening with strong holding power.
This self tapping screws are Zinc plated and works very well.
by
Nov 29, 2023
by
0/0
Compare Similar Items
Screw Length | |||
|---|---|---|---|
1 in | 2-3/4 in | 1/2 in | 1 in |
Size | |||
#8 | #12 | #8 | #10 |
Head Style | |||
Truss Head | Flat Head | Truss Head | Washer Head |
Drive Style | |||
Phillips | Phillips | Phillips | Hex |
Interior/Exterior | |||
Interior | Exterior, Interior | Interior | Interior |
Related Searches
Related Products
Teks #8 x 1-5/8 in. Fine Zinc-Plated Steel Truss-Head Phillips Drill-Point Lath Screws (120-Pack) provide secure 20-Gauge to 12-Gauge metal-to-metal fastening in stucco/plaster with strong holding power without the need to pre-drill. The engineered drill point and flute remove material and properly size the hole for threads. Install with a standard screw gun and a #2 Phillips-drive bit (screw gun and bit not included). No pre-drilling necessary.
Teks #10 x 1 in. Zinc-Plated Steel Hex-Head Self-Tapping Drill-Point Screws (140-Pack) are ideal for attaching HVAC, electrical, metal framing, and general metal-to-metal applications for secure fastening and strong holding power. Teks screws provide secure metal-to-metal fastening and strong holding power without the need to pre-drill. Screws tap their own threads. Engineered drill point and flute allow for efficient material removal
Teks #8 x 3/4 in. Fine Zinc-Plated Steel Truss-Head Phillips Drill-Point Lath Screws (200-Pack) provide secure 20-Gauge to 12-Gauge metal-to-metal fastening in stucco/plaster with strong holding power without the need to pre-drill. The engineered drill point and flute remove material and properly size the hole for threads. Install with a standard screw gun and a #2 Phillips-drive bit (screw gun and bit not included). No pre-drilling necessary.
Teks #8 x 1/2 in. Fine Zinc-Plated Steel Truss-Head Phillips Drill-Point Lath Screws (260-Pack) provide secure 20-Gauge to 12-Gauge metal-to-metal fastening in stucco/plaster with strong holding power without the need to pre-drill. The engineered drill point and flute remove material and properly size the hole for threads. Install with a standard screw gun and a #2 Phillips-drive bit (screw gun and bit not included). No pre-drilling necessary.