Model # MA100

Internet #100317880

Store SKU #391026

Village Ironsmith 2-1/4 in. Masonry Anchors
0050206513804

Village Ironsmith

2-1/4 in. Masonry Anchors

$453 /each

Product Overview

The Village Ironsmith 2-1/4 in. Masonry Anchors were engineered for value and ease of installation. This anchor comes in a 4-pack. Used to mount floor flange (FF125), column socket (V500), or stub support (ST100) to masonry surfaces when installing Village Ironsmith Railings and Columns.
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

The Village Ironsmith 2-1/4 in. Masonry Anchors were engineered for value and ease of installation. This anchor comes in a 4-pack. Used to mount floor flange (FF125), column socket (V500), or stub support (ST100) to masonry surfaces when installing Village Ironsmith Railings and Columns.
  • Used to mount floor flanges and column sockets to cement surfaces (Not included)
  • Use 1 pack per floor flange (Not included)
  • Use 1 pack per 4 column sockets (Not included)
  • Galvanized steel plating
  • Engineered for value and ease of installation

Product Overview

Model #: MA100
Sku #: 391026
Internet #: 100317880

The Village Ironsmith 2-1/4 in. Masonry Anchors were engineered for value and ease of installation. This anchor comes in a 4-pack. Used to mount floor flange (FF125), column socket (V500), or stub support (ST100) to masonry surfaces when installing Village Ironsmith Railings and Columns.

  • Used to mount floor flanges and column sockets to cement surfaces (Not included)
  • Use 1 pack per floor flange (Not included)
  • Use 1 pack per 4 column sockets (Not included)
  • Galvanized steel plating
  • Engineered for value and ease of installation

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Fastener Diameter
7/16"
Fastener callout size of screw
1/4"
Fastener length (in.)
2.25
Product Depth (in.)
.25
Product Height (in.)
10
Product Width (in.)
0.25 in
Screw length (in.)
2.25

Details

ACQ Rated Fastener
No
Drive Style
Hex
Fastener Head Style
Hex Nut
Fastener Plating
Galvanized
Fastener Type
Masonry Anchor
Fastener thread type of screw
Standard
Fastener/Connector Material
Metal
Finish Family
Black
Indoor/Outdoor
Outdoor
Maximum Weight Capacity (lb.)
0
Measurement Standard
SAE
Package Quantity
4
Primary Use
Mounting FF125, ST100, or V500 to masonry surfaces
Product Weight (lb.)
0.15lb
Returnable
90-Day
Usage
Mounting FF125, ST100, or V500 to masonry surfaces
With screw
Yes

Warranty / Certifications

Manufacturer Warranty
Free from Manufacturer Defect at Time of Delivery.

Specifications

Dimensions

Fastener Diameter
7/16"
Fastener callout size of screw
1/4"
Fastener length (in.)
2.25
Product Depth (in.)
.25
Product Height (in.)
10
Product Width (in.)
0.25 in
Screw length (in.)
2.25

Details

ACQ Rated Fastener
No
Drive Style
Hex
Fastener Head Style
Hex Nut
Fastener Plating
Galvanized
Fastener Type
Masonry Anchor
Fastener thread type of screw
Standard
Fastener/Connector Material
Metal
Finish Family
Black
Indoor/Outdoor
Outdoor
Maximum Weight Capacity (lb.)
0
Measurement Standard
SAE
Package Quantity
4
Primary Use
Mounting FF125, ST100, or V500 to masonry surfaces
Product Weight (lb.)
0.15lb
Returnable
90-Day
Usage
Mounting FF125, ST100, or V500 to masonry surfaces
With screw
Yes

Warranty / Certifications

Manufacturer Warranty
Free from Manufacturer Defect at Time of Delivery.

Questions & Answers

What do you use to anchor to limestone?

What do you use to anchor to limestone?
Asked by: Ernie
Limstone is one of the ingredients of portland cement, but it's weak and friable. I'd use the longer posts or 1-1/4" square steel tube, bore foot deep holes at least 6 inches in diameter, fill them with concrete and embed the posts 6 inches into the concrete. Wait 24 hours and mount the railings to the posts.
Answered by: PS
Date published: 2017-09-17

is there room for the nut on the floor flange

I bought anchors, drilled my holes, drove the anchors into the concrete only to find that there is no room to tighten the nuts on the anchors. Cannot get a wrench or nut driver on it! Can I solve the problem by buying the MA100's. Will there be enough room on the floor flange (ff 125) to do it? Using Village Ironsmith parts, except for the anchor bolts.
Asked by: Tom
The nuts fit if you drill set the anchors in the correct positions and do NOT angle the drill inward. I set 6 posts, only misangled one anchor, was still able to get a standard nylon insert nut and washer installed. If you do not have 1/4" thinwall deep sockets, an open end wrench works fine. It's just slower.
Answered by: PS
Date published: 2017-09-17
  • y_2017, m_10, d_22, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_, sid_100317880, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 120ms
  • QUESTIONS, PRODUCT

Customer Reviews

2-1/4 in. Masonry Anchors is rated 3.2 out of 5 by 6.
Rated 1 out of 5 by from Does not work This product is not compatible with the village ironsmith floor flange. The HD stocks them right next to all the other products for these railings as if they should work but they don't. This is been a big waste of time for me.
Date published: 2017-10-02
Rated 5 out of 5 by from using in the field I've used the Village Ironsmith wedge anchor several times installing vatious things like railings, gates that butt-up against block walls, installing "temp" permanent walkways using 8ft expantion poles with 1 1/4" black pipe spanning 8ft in between ea. post for 40ft. and heavy curtains attached. and Let me tell you, you can hang on the poles and do acrobatics and they won't even budge because the the supior quality of the materials, especially the Village Ironsmith masonry wedge anchors. I am 100% satisfied EVERY time I use this product. Thank Village Ironsmith for your cammitment to quality and satisfaction
Date published: 2007-03-21
Rated 5 out of 5 by from Product worked as advertised I used these to install a railing on my concrete porch. Pre-drilled the hole to the proper depth, hammered them in, and the railing is sturdy. No complaints on my end, other than the price seems a tad high for just 4 of them.
Date published: 2012-08-26
Rated 2 out of 5 by from Didn't work! I used a 1/4" bit per the instructions and hammered the anchor down. After tightening the nut, I found that I could apply a little pressure to the post I was bolting to the concrete, and the anchors pulled right out. Some sleeves didn't fully expand and one of the sleeves ripped in two.
Date published: 2011-08-30
Rated 5 out of 5 by from Works great I did not have problems with them as others did. I used on concrete steps and they worked great.
Date published: 2016-04-09
Rated 1 out of 5 by from Purchased to install Village Ironsmith1-1/4 in. Floor Flange This product does not work with Village Ironsmith 1 1/4 inch Floor Flange. Impossible to turn nut on bolt.
Date published: 2015-08-11
  • y_2017, m_10, d_22, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_, sid_100317880, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 108ms
  • REVIEWS, PRODUCT