A: Please call us at 1-800-346-7611 and we will be able to assist you.
A: Manu, this adapter is yellow brass. Yellow brass and SS are close together on the galvanic corrosion chart, so there are no concerns here.
A: The top of the barbs are larger then 1 1/4". I used it on a 1-1/4 in. IPS NSF Poly Pipe and it was a tight fit. You might be able to soften up the sdr11 pipe to receive the adaptor but once it hardened again it might leak without clamps to hold it tight.
A: yes - perfect fit
A: Thanks for contacting the Everbilt Team. The OD of the fitting is 1.41".You can either use soapy water or you can heat the srd11 pipe to fit over the barbed end. You will need to use two (2) clamps when using this method and the extra long male adapter allows you to use both clamps. If you have further questions you can reach us at 844-251-7446.
A: Yes it fits 1 1/4” inside dimension pipe. I used it with 1-1/4 in IPS, NSF Poly Pipe.
A: Yes. The barbed end fits 1 1/4" and the opposite end, the male insert, fits 1 1/4" NPT.
|Name||1-1/4 in. MPT x 1-1/4 in. Insert Brass Male Adapter||1-1/4 in. Brass Extra Long Male Insert Adapter||1-1/4 in. MPT X 1 in. Barb Brass Reducing Adapter Fitting||3/4 in. Brass Relief Valve|
|Fitting or Connector Type||Adapter||Adapter||Adapter||Tee|
|View Product||View Product||View Product||View Product|