3 in. x 5 in. Horizontal Stainless Steel Concentric Termination Vent Kit for Mid Efficiency Tankless Gas Water Heaters
- Compatible with Mid Efficiency Tankless Water Heaters
- Easy to Install Horizontal Venting
- 12 inch Wall Plate Included
- View More Details
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase.
Ask about this product
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
Product Details
About This Product
This Stainless Steel 3 in. x 5 in. Concentric Direct Vent Termination Kit is designed for use with Rheem EcoSense Mid Efficiency Tankless gas indoor direct vent Units. Made of durable stainless steel, the kit includes the components required to construct a typical through-the-wall venting with horizontal termination.
Highlights
- Stainless steel components
- 12 in. wall plate included with screws
- 94 degree elbow included
- Can be extended for up to 10 in. walls
- 1-year limited warranty
- Durable construction
- Long performance life
- Rheem is known for its acclaimed water and air systems
- Fix your water heater with peace of mind using genuine Rheem parts
- California residents see prop 65 warnings
- Call 1-855-400-2552 before noon for same-day installation service in most areas, or visit our Water Heater Installation page for more information.
- Return Policy
- California residentssee Prop 65 WARNINGS
Product Information
Specifications
Dimensions: H 16.75 in, W 5 in, D 12.75 in
Dimensions
Product Depth (in.) | 12.75 in |
|---|---|
Product Height (in.) | 16.75 in |
Product Width (in.) | 5 in |
Details
Finish Family | Silver Metallic |
|---|---|
Material | Stainless Steel |
Pack Size | 1 |
Returnable | 90-Day |
Warranty / Certifications
Manufacturer Warranty | 1 Year Limited Warranty |
|---|
Questions & Answers
ECOH180DVELP-3 Is this right kit for this heater
Hi Steve, The horizontal concentric vent kit is the right one for the ECOH180DVELP‑3 if you’re venting through a wall. Derius
What size hole saw is needed to cut the hole in the wall
Hi John, Based on the information you provided, it may be best to use a 5"-hole saw (or slightly larger) to cut the wall opening for the concentric vent kit. Derius
Will this fit a ECO200DVELN-3?
Will this work with ec0200dveln-3
Hi Mike, Yes, the 3" x 5" Horizontal Concentric Vent Kit is compatible with the ECO200DVELN-3 tankless water heater. It’s designed for mid-efficiency indoor direct vent models like yours. Derius
Would this fit model ECO160DVLN-3 and need any other adapters?
Great question, Enrique! Yes, the RTG20210 3 in. x 5 in. Horizontal Stainless Steel Concentric Termination Vent Kit is compatible with the ECO160DVLN-3 model. This vent kit is specifically designed for mid-efficiency indoor direct vent tankless gas water heaters like yours. Compatibility Highlights Fits EcoSense and RTG series mid-efficiency models Designed for horizontal through-the-wall venting Includes: 94° elbow 12" wall plate Termination cap Screws and hardware Do You Need Additional Adapters? In most standard installations: No extra adapters are needed if you're venting directly through a wall up to 10" thick. If your wall is thicker or you need to extend the vent run, you may need: Extension pipe sections Wall thimble or firestop spacer (depending on local code). Derius
Requirements for horizontal ventilation with eves
Hello Rich, For assistance with your inquiry, please call Technical Support at 866-279-4566 between the hours of 7 A.M. and 7 P.M. CST and one of our experienced analysts will be happy to assist you. Isaiah
what is the dimension from the back of the 90 degree piping to the end of the supplied horizontal pipe?
Hi Richard and thank you for your question. The 90-Degree Elbow – 8.1" rise - 8.1" run . The other piece does not have a specific length and you may need to call. 866-720-2076.
Does this exhaust get hot, at the exit point outside?
Hi James and thank your for your question. Yes, but there is no temperature listing for this due to too many variables.
Need coaxial vent for a Williams 6551522A room heater to go through wall and go vertical to above roof line termination. Is this kit compatible for such with additional piping and hangers.
Hi greenie and thank you for your question. Please call 1-888-444-1212.
Viewing 1-8 of 84
Customer Reviews
3.9 out of 5
