Questions and Answers for Charlotte Pipe 3/4 in. PVC Schedule 40 MPT x S Male Adapter

A:  this is not a reducing fitting it's a true 1 1/4 x 1 1/4 configuration. It will not accept a 1" part. For a better explanation and a recommendation, please contact our Technical Services Department at 800-438-6091.

A:  It will Fit a 1" coupling or if the fitting you show is a 1" fitting it will fit A 1" pipe

A:  No, it does not. In the description of the product, it says MPT, which stands for Male Pipe Thread. What you’re looking for is MHT, or Male Hose Thread. If you try to connect a hose to this fitting, it’ll either leak or you’ll need to make it super tight with an o-ring, but you’ll permanently damage the threads. These standards have a female counterpart, by the way: FPT and FHT.

A:  The threads do match a standard garden hose. I used it to attach a garden hose to a stock tank for easy cleaning. Just make sure the diameter is correct.

A:  Charlotte Pipe does not offer a "hose adapter" fitting. Please check with your local store, someone in the plumbing aisle should be able to direct you to a "Lasco" fitting that will work.

A:  No this is Listed as MPT, Male Pipe Thread, you need a MHT or Male Hose Thread. you can get a FPT x MHT Elbow Adapter to add to this or you can Just add a faucet to this and then you can add a hose to it?

A:  The short answer is no, it is national pipe thread with a taper. the taper it makes it difficult to tighten the hose fitting enough to get a good seal. There are fittings available at every hardware store though to do this properly.

A:  Yes, you should always to sealant on all connections to prevent leakage. It will make it easier to remove and reuse the fitting when disassembly/assembly is required...

A:  Yes, use teflon tape or pipe dope. 

A:  PVC male adapters manufactured by Charlotte Pipe utilize standard tapered threads and can be used to transition to dissimilar piping materials where allowed by local code. Teflon tape is a recommended thread sealant for PVC threaded fittings manufactured by Charlotte Pipe.

A:  Yes it needs to be wrapped with teflon tape

A:  Standard NPT

A:  The threading should be male pipe thread, as opposed to hose thread. It’ll jive with female iron or brass pipe as long as it’s threaded for pipe, though ideally it would meet female pipe threaded PVC.

A:  This is a male pipe thread (MPT). PVC fittings use the National Pipe Thread standard. If you want to know the exact pitch and thread count, you would need to Google NPT, because I'm sorry, but I do not know.

A:  the fitting configuration for this fitting is Male Pipe thread x socket Male.

A:  this fitting is designed for pressure applications. For a better explanation and a recommendation, please contact our Technical Services Department at 800-438-6091.

A:  Are you kidding me with that answer? Why did the guy ask? He needed an answer, just like others

A:  For our recommendations, please contact our Technical Services Department at 800-438-6091.

A:  For our recommendations, please contact our Technical Services Department at 800-438-6091.

A:  For our recommendations, please contact our Technical Services Department at 800-438-6091.

A:  Male Pipe Thread x Socket is the configuration. It's called a Male Adapter due to the threading on the outside. For our recommendations, please contact our Technical Services Department at 800-438-6091.

A:  For our recommendations, please contact our Technical Services Department at 800-438-6091.