Hello Rodriguez, thank you for your question. This timer does not have a time setting on it. If you habe any other questions, please give us a call between the hours of 7 AM – 8 PM Central Standard Time, Monday thru Friday at 1-800-654-8483, press option 2
Hello NCVT, thank you for your questions. No, this does not make a ticking noise. If you have any other questions, please give us a call between the hours of 7 AM – 8 PM Central Standard Time, Monday thru Friday at 1-800-654-8483, press option 4
Hello Betty, thank you for your question. Yes, this will work for lights that don't have an on off switch. If you have any other questions, please give us a call between the hours of 7 AM – 8 PM Central Standard Time, Monday thru Friday at 1-800-654-8483, press option 4
Hello Martha, thank you for your question. We are so sorry that this happened. This is certainly something that we did not expect to occur. We would love to have the opportunity to work with you directly and help walk you through the troubleshooting steps for this product, so you can enjoy our products to their full potential. At your earliest convenience, please give us a call between the hours of 7 AM – 8 PM Central Standard Time, Monday thru Friday at 1-800-654-8483, press option 2
Turn the arrow so it is pointing to the current time. Push down on the tabs corresponding to the times you want the timer ON. When I purchased my timer, all tabs were already pressed down, so you may need to lift up unwanted times, depending upon how yours is currently set. You can also change it to go on manually when you turn it on, as opposed to automatically.
Lift the buttons for the time you want the timer to be off!
Turn the arrow so it is pointing to the current time. Push down on the tabs corresponding to the times you want the timer ON. When I purchased my timer, all tabs were already pressed down, so you may need to lift up unwanted times, depending upon how yours is currently set. You can also change it to go on manually when you turn it on, as opposed to automatically.
Hi Paul, Great question and thank you for your interest in our 15119 timer . 1. Locate the segments around on the outer edge of the timer’s dial. These segments, each representing 30 minutes, can be pushed down from the edge of the dial (try using the tip of a pen or pencil). Conversely, segments that have been pushed down can be easily pushed back up by hand. Be sure all segments are pushed up before programming. Select a time period (or periods) you want the lamp turned on, then push down ALL the segments that fall on or within that time period. For example, to have the timer turn a lamp on at 10PM and off at 2AM, push down the segments representing 10PM and 2AM, and ALL the segments in between (See Figure 1). You may need to turn the dial clockwise to access the desired segments. 2. Rotate the timer’s dial clockwise until the pointer on the face of the dial points to the current time of day. Note: Nighttime hours (from 6:30PM to 6:30AM) are highlighted with a black background. 3. Set master switch to the TIMER ON position. See Figure 2 4. Plug the timer into an electrical outlet convenient to the lamp to be controlled. 5. Plug the lamp into the outlet on the side of the timer. Turn the lamp’s switch on for automatic control. The timer will not turn the lamp on if the lamp’s switch is off. The lamp will now turn on and off at the times you have set.. If you have any further questions, we encourage you to respond or contact out Customer Support through phone or email. Thank you, ByJasco Tech Support(Manufacturer)
Three
