push the buttons down to turn power on, up for off. set the timer for the times you want it to go on and off. plug the timer in, plug in the device to the timer, look at your cell phone, clock or watch, set the same time by spinning the timer dial to that time. if you want great accuracy of set time wait and do this on a hour, so you can point the arrow at that big number.
e are two 8:00s. Yes pull the pin or push for the time you want it to come on or go off!
Hi joe, Great question and thank you for your interest in our Plug-in Timer. This timer uses less than 1 watt of power. If you have any further questions, we encourage you to respond or contact our Consumer Support through phone or email. Thank you, Jasco Products Tech Support (Manufacturer)
Hello Henry, Great question and thank you for your interest in our Plug-in Mechanical Timer. For safety reasons, we do not have a timer we would recommend for this type of application. If you have any further questions, please feel free to respond or contact us through phone or email. Thank you, Jasco Products Tech Support (Manufacturer)
Back of package states, 125vac 60hz 15A 1250W(watt) 1/2 hp.
This product works for indoor devices only.
Hello Mickey10, Great question and thank you for your interest in our Plug-in Basic Mechanical Timer. With this mechanical timer you will need to pull all pins up first, and then push down the pins for the timeframe you want the device to be active. Next, rotate the timer’s dial clockwise until the pointer on the face of the dial points to the current time of day. Note: Nighttime hours (from 6:30PM to 6:30AM) are highlighted with a black background. Next, set master switch to the “TIMER ON” position. Lastly, plug the lamp into the outlet on the side of the timer and turn the lamp’s switch “On” for automatic control. The timer will not turn the lamp “On” if the lamp’s switch is “Off.” The lamp will now turn on and off at the times you have set. If you have any further questions, please feel free to respond or contact us through phone or email. Thank you, Jasco Products Tech Support (Manufacturer)
pegs up = off pegs down = on each peg = 30 minutes
yes
Hello Geo, Great question and thank you for your interest in our Plug-in Mechanical Timer. With this basic mechanical timer you can override the timer and use your lamp normally (manually), set the master switch to the “OUTLET ON” position. This will deactivate the timer’s control of the lamp, but the timer’s dial will still show the current time of day. To reactivate the timer’s control of the lamp, turn the lamp’s switch on and set the timer’s master switch to “TIMER ON.” If you have any further questions, please feel free to respond or contact us through phone or email. Thank you, Jasco Products Tech Support (Manufacturer)
30 minutes
Hello nelson, Great question and Thank you for your interest in our Plug-In 24-Hour Timer. The shortest amount of time you can schedule this timer is at 30 minute intervals. If you have any further questions, we encourage you to respond or contact our Customer Support through phone or email. Thank you, Jasco Products Tech Support (Manufacturer)
The lamp won't shut off after I got it all set up when time goes off on
Free to HD store
Hello LPFISH, Great question and Thank you for your interest in our Plug-In 24-Hour Timer. This is a question a sales associate can assist you with. If you have any further questions, we encourage you to respond or contact our Customer Support through phone or email. Thank you, ByJasco Tech Support (Manufacturer)
