Q:What is the thickness or gage of your piano hinges?
by|Feb 21, 2022
1 Answer
Answer This Question
A: The Everbilt 1-1/2 in. x 72 in. Bright Nickel Continuous Hinge measures 1.5 mm thick.
by|Oct 28, 2023
Q:Could this be a replacement for old mobile home door with continuous hinge?
by|Jul 8, 2021
1 Answer
Answer This Question
A: The Everbilt 1-1/2 in. x 72 in. Bright Nickel Continuous Hinge can be a replacement for a continuous hinge of the same dimensions.
by|Feb 13, 2023
Q:Install on face or between door and frame ?
by|May 22, 2021
1 Answer
Answer This Question
A: The Everbilt 1-1/2 in. x 72 in. Bright Nickel Continuous Hinge can be installed either surface mounted, inside door and jamb, or mortised to reach the desired result.
by|May 25, 2021
Q:what is the guage of the metal?
by|Feb 11, 2021
1 Answer
Answer This Question
A: The gauge of metal for the Everbilt 1-1/2 in. x 72 in. Bright Nickel Continuous Hinge is 0.31 inches.
by|Nov 20, 2021
1 found this answer helpful
Q:It this hinge strong enough to use for a drop leaf on a sewing cabinet. The leaf is about 32" x 20" of 3/4" plywood.
by|Dec 22, 2020
2 Answers
Answer This Question
A: I used mine for a top/seat on diy banquette/trunks. The tops measured 24” x 48” x 3/4”. I’ve never had any problems.
by|Dec 30, 2020
A: There are too many variables to recommend a precise weight rating for the Everbilt 1-1/2 in. x 72 in. Bright Nickel Continuous Hinge.
by|Dec 23, 2020
Q:I have place your bead board product in my cart which I intend to use to build a doghouse. I wish to have a hinged lid. The bead board is .313" thick. I suspect the screws which come with this hinge may be too long? I do not want them protruding through the top cover. Can you please verify screw length? Thank you.
by|Aug 23, 2019
1 Answer
Answer This Question
A: The screws with this continuous hinge are 5/8" in length.
by|Aug 26, 2019
Q:Does think open 360 degrees?
by|Feb 12, 2019
2 Answers
Answer This Question
A: No. It opens about 270 degrees.
by|Dec 12, 2020
A: The continuous hinge does not open 360 degrees, it opens about 90 degrees.
by|Apr 11, 2022
1 found this answer helpful
Q:What is the hole spacing on this hinge. It looks like it starts off from one end at about 1".
by|Oct 7, 2018
2 Answers
Answer This Question
A: The hole spacing is 2".
by|Nov 30, 2018
1 found this answer helpful
A: You are correct, the hole spacing is 1" from the end. From center to center of each hole is 2".