We recommend working with an authorized Generac dealer to better assist you. If you need assistance finding a local dealer we recommend using our dealer locator found here: http://www.generac.com/dealer-locator
You could easily mount it over a box that size yes, simply drill the box cover hole pattern into the back wall of this box and mount over the top. It will stick out from the wall of course and you may need a bit extra wire length to reach the back of the connector but should function perfectly.
On this model it points down to the ground.
It faces downward towards the ground.
it points down toward the ground.
I already had an electrician run aluminum wire from the panel to the garage where the power inlet box will be located. Do the lugs on your product accept aluminum wire?
It is important that your wiring is provided in accordance with any local codes that apply to your area. To ensure that you are able to install the correct wiring, we would recommend working with a certified electrician in your local area. For help locating a certified party closest to you, give us a call at 888-GENERAC (436-3722).