You should contact AladdinConnect.... very helpful.
My opener is 16 years old. This device works great with it. I installed it over 3 years ago.
Yes, as long as the garage door opener has Safe-T-Beams.
I’m sure it will. As long you have a good WiFi otherwise, you can use a extender/repeater, replace one of your wall garage switch with the genie controller. Then configure it to your WiFi, that simple. Watch the YouTube video and follow the step by step. If you get stocked, you can always call Genie tech support during daytime business hours. You Be glad you install this unit, it’s very helpful and convenient. You can control your garage door anywhere in the world through internet. I was able to open and close my door from Australia. ENJOY...Good luck!!!
Only 2 wires attach to the Genie Garage Door opener at the same place where the 2 wires to the original wall control button attaches. I don't see any reason why it would not work.
yes it is working fine for me
The Aladdin Connect is not rated for outdoors. And even if you can install the Aladdin Connect in a protect location, you may not be able to get the door sensor that is installed on the garage door to work on a gate.
Probably not. This determines the door position with a sensor that mounts on the door. When the door is closed, the sensor is vertical. When the door raises, the panel becomes horizontal and the sensor determines that it is horizontal, not vertical, meaning the door is open. If your gate has a position to mount the sensor where it can be horizontal when closed and vertical when opened, it would probably work. Think of the sensor as standing up when closed and flat on its back when opened. I don't know of a gate like that, but you might be able to build an adapter. If your gate were like a railroad crossing gate, you could put it on the end and when the gate is raised, it would sense it is open. I don't know if it is weatherproof, so it might have a problem being outside in rain, snow, or even hot sun.
No, this will not work on a gate opener.
No, I haven't tried it, but I'm willing to bet it won't be a problem. The Aladdin Connect hard wires directly into the opener with two wires for each door. There are two wires from the AC for each door, and they connect in the same two connectors where the wall-mounted door control plug in. They share the same connector. Don't see any reason you cannot add a third (door bell button opener, keypad, etc).
Adding this WiFi remote should not cause any changes to your original controllers.
No, it will not. The outdoor keypad will still work.
I have a wall mount outside keypad control and this device. I can open/close the garage door using the inside controller, my phone, outside keypad and my car.
Not at all. Consider this as additional switch.
Not at all, all will be fine. BTW, great system.
I have warned Home Depot not to send me these questions because of poor customer support - so here is my response. I purchased the Aladdin and never got it to work. No one was available to answer questions and the total expense was a waste. This past year I bought the MY Q garage door opener. It cast between $49.95 to $29.95 depending on sale promos available. That simple to install, totally easy to use including phone app and probably even Alexa. Aladdin gets a no star rating for complexity, and confusion. And when my car was in for repair, while using a lonaner, I could still open and close the garage door from anywhere. It even has a warning signal for closing should you send the close signal, and shut off, whene not looking for a child walking close to the closing door.
The picture says it does. I don’t use Alexa for anything. I use the app on my phone and it works great.
Don’t know... best to contact Genie/Aladdin. They are very helpful.
Yes, it does!
Call Genie Aladdin and ask them.
Google the make of garage door opener and find out how to reset the remote code. It’s simple, involving a button under the light cover and a few steps. It will also allow you to recognize the remote you have in your possession. The AladdinConnect is well worth the price.
I’m not sure call the manufacturer.
Not with Aladdin connect, remotes are paired directly to the open itself.
Change the code
Call Aladdin Connect. They are very helpful.
The Aladdin Connect has no communication with remotes. If you want to disable a remote then you need to remap all the other remotes to the opener based on openers installation instructions.
Yes, you can. You will need to clear the garage door openers reciever. After clearing it, you can program back in the remotes and wireless devices that you still have. The one that is missing will no longer work, but the ones you program back in will work. You will need to follow the instructions for the model that you have. This can be found in the owner's manual. You can also contact Genie customer service at 1-800-354-3643 for assistance.
Yes, it is.
yes since your garage door have a wall switch you can control it
Yes, it will.
I don’t know anything about Genie Pro Max however, if you have wall switch connected with 2 wires, I don’t see any reason not to work. I took my old wall switch and replaced with Aladdin Connect device and configured to my WiFi and works. You can always call Genie customer service 1-800-599-4995.
Yes, that is one of the Aladdin Connect advantages. You will be able to see of the door is open or close even if it is manually done.
Yes if the door is in the open position it will show that in app as door open
Yes, it is a position sensor so no matter if the door opens/closes manually or with the motor, it will report a change in state. It has a little ball that rolls inside this device which is mounted to the top of your door. When the top of your door goes horizonal, as when opened, the ball rolls and changes position and it reports. Vise versa when the door closes and the top of your door goes vertical.
Yes
Yes, you will get a notification (as long as you enable notifications in the app) that the door is open manually.
Yes.... it will let you see in the app and it will let know when you open the door even if it is manually opened.