Q:How strong is the bond between two pieces of plastic on a cell phone case?
by|Jul 22, 2023
1 Answer
Answer This Question
A: The tensile strength is over 3900 psi. If prepped correctly should be plenty strong
by|Jul 24, 2023
Q:What's the difference between Kwikweld and JBWeld? Which one should I use for stopping a small leak dripping from a glued joint at a PVC coupler? The pipe is outdoors, on output side of irrigation valve, is not under constant pressure. Thanks.
by|Jul 22, 2023
1 Answer
Answer This Question
A: original is stronger than KW but much longer for a full cure. Look to the Steel stick putty 8267 for this
by|Jul 25, 2023
1 found this answer helpful
Q:Can this be used for on an outside ceramic sculpture to adhere two parts together. ?
by|Jul 15, 2023
1 Answer
Answer This Question
A: Yes. Be sure to clean with acetone
by|Jul 17, 2023
Q:Can I use this product to glue a broken toilet tank lid back together. There is a clean break into two pieces. If not this product, can you recommend a product that will work.
by|Jul 10, 2023
1 Answer
Answer This Question
A: Yes you can. Be sure to clean the area with acetone
by|Jul 11, 2023
Q:Can this be used on an exhaust manifold leak?
by|Jul 10, 2023
1 Answer
Answer This Question
A: Look to the Extreme heat paste #37901
by|Jul 11, 2023
Q:I need to mount unistrut inside a compartment of a utility body of a truck. Can this be used for that? I plan on hanging tool pouches from the strut.
by|Jul 9, 2023
1 Answer
Answer This Question
A: Not sure about weight load, size or other aspects of the strut mount, but the item you mention is our strongest item.
by|Jul 10, 2023
Q:Can this product be used to join a small aluminum bar (1in. wide x 7 inches long 1/8 in. thick) to steel on a high temperature (500F) application/
by|Jun 27, 2023
1 Answer
Answer This Question
A: Thats at the edge. Consider Copper RTV silicone like is used on automotive exhaust work.
by|Jun 29, 2023
Q:Can this be used on rod iron Post the base of the poles are crack
by|Jun 13, 2023
1 Answer
Answer This Question
A: Yes. Be sure that all rust or paint is removed from the surface
by|Jul 4, 2023
Q:Can this be used on stainless steel?
by|Jun 8, 2023
1 Answer
Answer This Question
A: yes. Be sure to scuff the surface a bit for better adhesion