Questions and Answers for John Guest 1/2 in. Push-To-Connect Polypropylene Tee Fitting

A:  Hello, There are currently over 900 chemicals, other than lead, on the Proposition 65 list. Additional information regarding California Proposition 65 and John Guest products can be found in the link below. If you have additional questions regarding these products please feel free to contact our technical support department at 877-700-4242. https://www.johnguest.com/wp-content/uploads/2018/10/California-Proposition-65.pdf Best Regards,

A:  Hello, John Guest model # 803169 is suitable for use with any PEX tubing that has an outside diameter of 1/4". If you have additional questions regarding the use of this product please feel free to contact our technical support department at 877-700-4242. Best Regards,

A:  As long as the outer diameter is 1/4 inch, it should work.

A:  This fitting can be used with pex, but make note that the size listed on our push to connect fittings refer to a pipes outer diameter and pex size normally refers to the pipes inner diameter. Please make note of your pipes outer diameter to select the correct size push to connect fitting.

A:  Pex tubing is compatible with pex connectors. It is not designed to work with the John Guest connector.

A:  I don't know. I would check directly with the John Guest company for connector applications.

A:  Hello, John Guest model # 803169 is not suitable for use with air. If you have additional questions please feel free to contact our technical support department at 877-700-4242. Best Regards,