Questions and Answers for Milwaukee 4-Cutter SDS-PLUS Carbide Hammer Drill Bit Kit (5-Piece)

A:  SDS and SDS-Plus are interchangeable. SDS Max is different/larger shank.

A:  Hello! These MX4 SDS-Plus Carbide Drill Bits are designed to fit all SDS-plus rotary hammers.

A:  Hi Brian- This kit includes: (1)3/16" x 4" Rotary Hammer Drill Bit, (1)1/4" x 6" Rotary Hammer Drill Bits (1)5/16" x 6" Rotary Hammer Drill Bit, (1)3/8" x 6" Rotary Hammer Drill Bit, (1)1/2" x 6" Rotary Hammer Drill Bit

A:  Hello- These SDS-PLUS 4CT MX4™ 5 PC bits (48-20-7498) feature solid head carbide deliver up to 5x longer life in concrete with rebar.

A:  Yes they are carbide 

A:  These are for concrete

A:  I purchased these for concrete and stone, works great. For steel or metal, you want a diamond or carbide tip. plus i dont think you would use a hammer drill for that either.

A:  These will work for concrete with rebar embedded in it, I wouldn't recommend for steel directly. There are specific bits for drilling steel alone.

A:  I'm sure you can use those bits with the drill you mentioned, if you are able to tighten the chuck. Actually you only need straight spline bits for the 2804-20 drill which is what are made for your drill. Hope this helps you.

A:  These bits cut through porcelain with ease…with the proper drill of course. I bought a Milwaukee D handle hammer drill after the struggle with my M18. Concrete block with ease I’m sure.

A:  Not really. These are SDS Plus bits that require a special chuck like the rotary hammers. have on them.

A:  The short bit is 4-1/2" long and the others are 6" long.

A:  The bit length is 6 1/2 in. You can drill 4 in deep

A:  Overall, the length is 6", and the stubby is 4 inches overall.

A:  No, I don't think so.

A:  No. This kit does not include a 3/4" bit.

A:  No

A:  No, a 3/16, 1/4, 5/16, 3/8, and 1/2" are included in the packet. I hope this helps.

A:  No, this set only goes to 1/2".